• The Transactions of the Korea Information Processing Society
• /
• v.3 no.7
• /
• pp.1858-1867
• /
• 1996

This paper describes a platform for video conferencing on Information Super Highway. In this paper we de-sign a Multi-Multicast Server(MCS) and the platform. The platform uses Multi-MultiCast Server for multitasking IP Multicast data on IP over ATM. Based on Multicast Address Resolution Server (AMRS) which was proposed in this paper the platform maps from D class IP addresses to ATM addresses. MARS handles a recovery in case of MCS down. This paper also presents a solving mechanism for handling botteneck by using the MCS.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.1907-1916
• /
• 2020

In this work, the depletion capability implemented in Monte Carlo code MCS is investigated to predict the isotopic compositions of spent nuclear fuel (SNF). By comparison of MCS calculation results to post irradiation examination (PIE) data obtained from one pressurized water reactor (PWR), the validation of this capability is conducted. The depletion analysis is performed with the ENDF/B-VII.1 library and a fuel assembly model. The transmutation equation is solved by the Chebyshev Rational Approximation Method (CRAM) with a depletion chain of 3820 isotopes. 18 actinides and 19 fission products are analyzed in 14 SNF samples. The effect of statistical uncertainties on the calculated number densities is discussed. On average, most of the actinides and fission products analyzed are predicted within ±6% of the experiment. MCS depletion results are also compared to other depletion codes based on publicly reported information in literature. The code-to-code analysis shows comparable accuracy. Overall, it is demonstrated that the depletion capability in MCS can be reliably applied in the prediction of SNF isotopic inventory.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.29-37
• /
• 2002

This paper presents the diagnostic method for fault prevention in metal clad switchgear(MCS) through comparison of signals before and after detecting the partial discharge using electromagnetic detection technique. Electromagnetic waves detected by antennas of the inside and outside of MCS are analyzed and compared by frequency spectrum analysis method which can estimate an insulation abnormality and normality of MCS. As a result of the experiment by the proposed method, we can detect the insulation abnormality as partial discharge in MCS and these results can be applied to preventive diagnosis of MCS.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.94.2-94.2
• /
• 2011

In this work, multi-functional groups, i.e., nitrogen and oxygen, contained microporous carbons (MF-MCs) were prepared by the one step carbonization of the poly(vinylidene chloride-co-acrylonitrile-co-methyl methacryalte) (PVDC-AN-MMA) without activation. The electrochemical performance of MF-MCs was investigated as a function of carbonization temperature. It was found that MF-MCs had a high specific surface area over $800m^2/g$ without additional activation, resulting from the micropore's formation by the release of chlorine groups. In addition, although functional groups decreased, specific surface area was increased with increasing carbonization temperature, leading to the enhanced electrochemical performance. The pore size of the carbon distributed mainly in small micropore of 1.5 to 2 nm, which was idal for aqueous electrolyte. Indeed, the unique microstructure features, i.e. high specific surface area and optimized pore size provided high energy storage capability of MF-MCs. These results indicated that the microporous features of MF-MCs lead to feasible electron transfer during charge/discharge duration and the presence of nitrogen and oxygen groups on the MF-MCs electrode led to a pseudocapacitive reaction.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.2
• /
• pp.126-131
• /
• 2007

In this paper, Monte Carlo Simulation (MCS) method was used as an uncertainty assessment tool for air flow, net thrust measurement. Uuncertainty sources of the net thrust measurement were analyzed, and the probability distribution characteristics of each source were discussed. Detailed MCS methodology was described including the effect of the number of simulation. Compared to the conventional sensitivity coefficient method, the MCS method has advantage in the uncertainty assessment. The MCS is comparatively simple, convenient and accurate, especially for complex or nonlinear measurement modeling equations. The uncertainty assessment result by MCS was compared with that of the conventional sensitivity coefficient method, and each method gave different result. The uncertainties in the net thrust measurement by the MCS and the conventional sensitivity coefficient method were 0.906% and 1.209%, respectively. It was concluded that the first order Taylor expansion in the conventional sensitivity coefficient method and the nonlinearity of model equation caused the difference. It was noted that the uncertainty assessment method should be selected carefully according to the mathematical characteristics of the model equation of the measurement.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.5
• /
• pp.393-399
• /
• 2004

For the efficient determination of activity against solid tumors, an in vitro tumor model that resembles the condition of in vivo solid tumors, is required. The purpose of this study was to establish a rapid culture method and viability assay for an in vitro 3-dimensional tumor model, multicellular spheroid (MCS). Among 12 human cancer cell lines, a few cell lines including DLD-1 (human colorectal carcinoma cells) formed fully compact MCS which was adequate for in vitro viability assay. DLD-1 MCS showed steady growth reaching $700\;{\mu}m$ diameter after 11 day culture. DLD-1 cells grown as MCS showed significant increase in $G_0/G_1$ phase compared to the monolayer cells (73.9% vs 45.7%), but necrotic regions or apoptotic cells were not observed. The cells cultured as MCS showed resistance to 5-FU (10.3 fold higher $IC_{50}$) compared to monolayers, however, tirapazamine (a hypotoxin) showed similar activity in both culture systems. In summary, MCS may be a valid in vitro model for activity screening of anticancer agents against human solid tumors and also exploitable for studying molecular markers of drug resistance in human solid tumors.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.6
• /
• pp.48-53
• /
• 1997

The multicasting of MCS(Multicast Server) requires a effective traffic control scheme to prevent buffer overflow on ATM subnetworks. This paper considers MCS multicasting to TCP packets, and propose EPD + SPD scheme(Early Packet Discard-same Source Packet Discard) using common buffer. When the threshold of output buffer is reached, MCS drops an entire packet prior to buffer overflow, so that corrupted packets will not be transmitted by the server. And SPD scheme show that the EPD + SPD results in higher TCP throughput than that of tail drop and EPD + DFF.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2019-2029
• /
• 2009

There are several MCS(Monitoring, Control and Surveillance) systems for maritime safety and security in Korea; VMS (Vessel Monitoring System) that based on the AIS(Automatic Identification System), and the LRIT(Long-Range Identification and Tracking), the Vessel Free Pass System that based on the RFID(Radio Frequency IDentification), the Fisheries Information Network that provided by the National Federation of Fisheries Cooperatives. This paper surveys the fundamental technologies of MCS systems, and compares the role and function of them. It also surveys the development direction of each systems and research topics for cooperation of them.

• Korean Journal of Ecology and Environment
• /
• v.55 no.2
• /
• pp.120-131
• /
• 2022

Microcystins (MCs) are cyano-toxins mainly produced by cyanobacteria in the genera of Microcystis, Anabaena, and Oscillatoria. The concentrations of MCs in the water bodies and fish tissues taken from the four weirs (Ipo, Gangjeong-goryeong, Baekje, and Juksan) in the four main rivers in Korea, and the health risk of human due to consumption of toxin-detected fish was examined. The maximum values of MCs concentration in the water samples were as follows: Juksan (3.261 ㎍ L^-1), Gangjeong-goryeong (1.014 ㎍ L^-1), Baekje (0.759 ㎍ L^-1), and Ipo (0.266 ㎍ L^-1) weirs. The MC-RR concentration was the highest among the MCs, and MC-YR was not detected. MCs of 0.222~9.808 ㎍ g^-1 dry weight were detected in the liver of 3 out of 215 fishes of 16 species, and below the detection limit in muscle. As a result of comparing the feeding characteristics of the collected fishes and toxin concentrations in water and fish tissue, it was concluded that the biomagnification of MCs through the food chain did not occur. It was judged that there was no health risk due to the consumption of the fish detected the toxin, based on the amount of the fish intake of the Korean people and the allowable daily intake of MCs. However, in order to reduce the health risk due to MCs, further studies should be conducted to analyze the concentration of MCs contained in fish tissues collected at various times in the area dominated by harmful cyanobacteria to obtain data on the exposure of MCs due to fish consumption. In addition, it is necessary to establish the management guidelines for MCs in fish tissues.

• Korean Management Science Review
• /
• v.34 no.3
• /
• pp.43-60
• /
• 2017

This study empirically examined the differences in degrees of product or process innovations according to the activation forms of all knowledge management (KM) processes (i.e., socialization, internalization, externalization, and combination), which are influenced by the usage patterns of management control systems (MCS)(i.e., interactive and diagnostic usage patterns). We empirically investigated and identified the links among usage patterns of MCS, the activation forms of KM processes, and the kinds of innovation promoted. Under high competitive conditions, it was found that the interactive usage of MCS is relatively more preferred and enhanced. However, when environmental uncertainty is high, it was shown that the diagnostic use of MCS is more emphasized. Thus, it is evident that the use patterns of MCS are determined by environmental conditions. From the results of this study, it was suggested that under high interactive use of MCS, the activation of socialization and internalization is more enhanced than the facilitation of externalization. It was also observed that when both interactive and diagnostic usage of MCS are high, KM processes are more activated and strengthened. The results indicated that under high activation of KM processes, product innovation as well as process innovation are more frequently occurred. Finally, the results of this study suggested that according to the levels of innovation openness, major innovations are more frequently occurred and promoted than minor innovations.