• Journal of Life Science
• /
• v.30 no.4
• /
• pp.379-385
• /
• 2020

Phlojodicarpus sibiricus and Artemisia kruhsiana Besser are medicinal plants traditionally used in Russia. Phlojodicarpus sibiricus extracts (PSE) have been shown to have anti-obesity properties, and Artemisia kruhsiana Besser extracts (AKBE) contain terpenoid compounds that exert various medicinal effects. Here, we investigated the potential pro-apoptotic effects of PSE and AKBE in diffuse large B-cell lymphoma (DLBCL) and elucidated the underlying mechanism. PSE and AKBE treatment of six DLBCL cell lines with various genetic abnormalities effectively reduced cell viability in a dose-dependent manner, while having a minimal impact on the survival of normal murine bone marrow cells and splenocytes. This suggests that the cytotoxic effects of PSE and AKBE are specific to DLBCL cells. Therefore, we expect limited side effects when these plant extracts are administered to DLBCL patients. Our JC-1 assays demonstrate that the pro-apoptotic effects of these plant extracts are produced by a reduction of anti-apoptotic Bcl-2 family members and, thereby, disruption of the mitochondrial membrane potential. Moreover, PSE and AKBE induce cell death independently of Myc, whose abnormalities are frequently observed in patients with DLBCL and are associated with poor prognosis. Our findings reveal hitherto uncharacterized pro-apoptotic effects of PSE and AKBE in DLBCL. Isolation of single compounds with anti-lymphoma activities should be pursued further.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.21-25
• /
• 2001

기계부품의 소형화 , 고속화, 그리고 저공해, 저소음이 요구되는 세계적인 추세에서 정밀가공기술은 기계 및 전자산 업에서 중요한 위치를 차지하게 되었다. 특히, 무심연삭공정(Centerless Grinding)은 높은 생산성과 정확한 치수 형성의 능력이 있어서 원통형상을 가공하는 중요한 생산공정으로 사용되어 왔다. 예컨대 VCR의 소형 축. Computer Disk Drive, 초소형 모터, 연료분사기등은 쎈터레스 연삭공정을 통하여 높은 정밀도를 얻고 있다. 하지만 이 공정의 특수성과 측정의 어려움으로 인하여 이러한 정밀형상의 형성과정은 아직도 잘 밝혀져있지 않다. 무심연연삭 공정에서는 부품이 기계에 고정되어 있지 않고 공작물 받침날 위에 올려져 있으며 조절바퀴와 연삭바퀴 사이에 눌려져 있다. 조절바퀴가 마찰력으로 공작물을 돌려주며 연삭바퀴에서 연삭가공이 일어나게 된다. 조절바퀴와 연삭바퀴사이의 거리는 기계 자체의 탄성변형으로 인하여 항시 변화하게 되며 이 거리의 변화가 공작물의 정밀형상 형성에 결정적인 영향을 미치게 된다. 본 연구에서는 무심연삭공정중 공작물과 받침날, 조절바퀴, 연삭바퀴의 상대운동을 기하학적으로 해석하였다. 특히 간섭조건을 사용하여 실제 공작물의 운동을 해석하여 순간 명목 절삭깊이를 구하였다. 또한 연삭 특성실험식을 이용하여 수직 연삭력을 구하고 연삭기의 탄성변형을 구하여 순간 실제 절삭깊이를 계산하였다. 그로부터 진원도형성에 관한 기본식을 유도하였다. 본 연구에서 유도된 진원도 형성 식을 이용하여 실험과 동일한 조건으로 컴퓨터 시뮬레이션을 수행하였다. 그리고 원형중의 어떤 이상형상, 즉, 홈또는 돌기는 반복되어서 다른 돌기 또는 홈을 형성 하게되며 그 반복주기는 공작물이 조절바퀴와 연삭바퀴위에 떠있는 각도에 따라 결점 됨을 확인하였다.'유창성' 에 그 목표를 두고 있는 점을 감안한다면, 시작단계부터 반드시 정확한 발음을 지녀야 하는 가의 문제도 생각해 볼 필요가 있다. 경우에 따라서는, 정확한 발음은 그 언어에 대한 숙련도가 점차 높아짐에 따라 이와 병행하여 이루어지는 경우도 흔히 경험하는 일이기 때문이다. 결국 초등영어 교육과정에도 명시되어 있듯이 '...영어에 대한 친숙함과 자신감을 심어주고, 영어에 대한 흥미와 관심을 지속적으로 유지시키는 것이 중요하기' 때문에 무엇보다 중요한 측면은 흥미와 관심을 유지시키는 지적인 학습활동보다는 정의적인 학습활동의 전개가 필요하다고 하겠다. 유리된 AA의 세포독설과 관련된 세포내의 역할에 대해 의문이 제기되었다., PCL에 SOD-1도 경미하게 나타났으나, 경련이 나타난 쥐에서는 KA만을 투여한 흰쥐와 구별되지 않았다. 이상의 APT의 항산화 효과는 KA로 인한 뇌세포 변성 개선에 중요한 인자로 작용할 것으로 사료되나, 보다 명확한 APT의 기전을 검색하고 직접 임상에 응응하기 위하여는 보다 다양한 실험 조건이 보완되어야 찰 것으로 생각된다. 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.2
• /
• pp.137-142
• /
• 2005

Purpose: The purpose of this study is to evaluate the results of arthroscopic anterior cruciate ligament(ACL) repair with minimal incision and to review prognostic factors according to ACL tear patterns and the presence of associated injury Materials and Methods: Thirty eight patients (thirty nine knees) with acute ACL tear were given arthroscopic ACL repair between January 2001 and December 2002 and were followed up at least over six months. Intraoperative findings such as ACL tear pattern and the presence of synovial or concomitant medial collateral ligament injuries were recorded. Each knee was then postoperatively re-evaluated with aid of KT-1000 arthrometer and Lachman test and Lysholm score. Results: Postoperative limitation of motion was significant when combined typed ACL tear was present with concurrent medial collateral ligament(MCL) injury. In contrast, in the case where there were sole proximal ACL tear or no evidence of synovial injury, the limitation of motion was not significant. Anterior laxity was significantly associated with the presence of combined typed ACL tear or concurrent synovial injury, but was not significant when there were sole proximal ACL tear. Conclusion: In the case where there is sole proximal ACL tear without concurrent synovial injury, arthroscopic ACL repair can be considered as a treatment modality for the treatment of acute ACL injury.

• Journal of Integrative Natural Science
• /
• v.2 no.1
• /
• pp.18-23
• /
• 2009

This minireview provides the chosen examples of our recent discoveries in the polymerization of hydrosilanes, dihydrosilole, lactones, and vinyl derivatives using various catalysts. Hydrosilanes and lactones copolymerize to give poly(lactone-co-silane)s with $Cp_2MCl_2$/Red-Al (M = Ti, Zr, Hf) catalyst. Hydrosilanes (including dihydrosilole) reduce noble metal complexes (e.g., $AgNO_3$, $Ag_2SO_4$, $HAuCl_4$, $H_2PtCl_6$) to give nanoparticles along with silicon polymers such as polysilanes, polysilole, polysiloxanes (and silicas) depending on the reaction conditions. Interestingly, phenylsilane dehydrocoupled to polyphenylsilane in the inert nitrogen atmosphere while phenylsilane dehydrocoupled to silica in the ambient air atmosphere. $Cp_2M/CX_4$ (M = Fe, Co, Ni; X = Cl, Br, I) combination initiate the polymerization of vinyl monomers. In the photopolymerization of vinyl monomers using $Cp_2M/CCl_4$ (M = Fe, Co, Ni), the photopolymerization of MMA initiated by $Cp_2M/CCl_4$ (M = Fe, Co, Ni) shows while the polymerization yield decreases in the order $Cp_2Fe$ > $Cp_2Ni$ > $Cp_2Co$, the molecular weight decreases in the order $Cp_2Co$ > $Cp_2Ni$ > $Cp_2Fe$. For the photohomopolymerization and photocopolymerization of MA and AA, the similar trends were observed. The photopolymerizations are not living. Many exciting possibilities remain to be examined and some of them are demonstrated in the body of the minireview.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.93-100
• /
• 2017

Purpose: A purpose of this study was to compare dose of junction between breast and SCL fields in radiation therapy by MLC located at the junction. Materials and Methods: With 6 MV of 21EX-S equipped with 120-leaf Millennium MLC, treatment plans were designed with 30 patients who underwent radiation therapy using TFT. Plan 1 where the MLC was all used at the junction. In plan 2 and plan 3, MCLs were retracted 5 mm from breast and SCL, respectively. Plan 4 with all of MLC retracted at the junction were designed. In all of the plans, collimator angle for SCL field was divided into $0^{\circ}$ and $270^{\circ}$. To verify junction dose, the dose at 3cm depth of junction was compared with average value by MapCHECK. Results: In case of the SCL field with $0^{\circ}$ collimator angle, average value of D3cm was 4131.1, 4215.9, 4351.4, and 4423.0 cGy. In case of the SCL field with $270^{\circ}$ collimator angle, average value of D3cm was 4044.3, 4246.7, 4291.1, and 4441.2 cGy. In plan1 and 3, change in average dose depending on collimator angle was changed more significantly than paln2 and 4. Dose measured at 3cm depth of junction was similar to treatment plan. Conclusion: In radiation therapy plan for breast cancer with SCL, retracting MLCs from junction between breast and SCL fields will lead to decrease effect of dose of the junction.

• Journal of Oral Medicine and Pain
• /
• v.30 no.3
• /
• pp.301-317
• /
• 2005

The number of patients with tongue carcinoma is increasing rapidly among young individuals in many parts of the world. Oral carcinoma progresses from hyperplastic lesion through dysplasia to invasive carcinoma and the concept of "field cancerization" with molecular alteration has been suggested for oral cavity carcinogenesis. Significant improvement in treatment and prognosis will depend on more detailed understanding of the multi-step process leading to cancer development. To induce tongue carcinoma in rat by 4-NQO, each drinking water was made to 10 ppm, 25 ppm, 50 ppm and control (only D.W. without 4-NQO). Specimens were classified into 4 groups such as control, I (mild & moderate dysplasia), II (severe dysplasia and carcinoma in situ), III (carcinoma). The mRNA expressions of Bcl-2 family were evaluated by RT-PCR technique. For anti-apoptotic Bcl-2 family, mRNA expression of Bcl-w was down-regulated in all stages of tongue carcinogenesis model. However, mRNA expression of Bcl-2 was up-regulated. For pro-apoptotic Bcl-2 family, all members were down-regulated in all stages of tongue carcinogenesis model except for Bad mRNA in group III. In terms of BH3 only protein, mRNA expressions of Bok and Mcl-1 were down regulated in all stages of specimen, but Bmf in group II and BBC3 in group III were up-regulated. Our current findings demonstrated the involvements of mRNA expression of Bcl-2 family in multi-step tongue carcinogensis. This highlights the necessity for continued efforts to discover suitable biomakers (Bcl-2 family) for early diagnosis of the disease, and to understand its pathogenesis as a first step in improving methods of treatment. The discovery of these potential biomarkers and molecular targets for cancer diagnostics and therapeutics has the potential to significantly change the clinical approach and outcome of the disease.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.128-137
• /
• 2005

In this study we measured the amount of light energy that was projected through the tooth material and analyzed the degree of polymerization by measuring the surface hardness of composites. For polymerization, Optilux 501 (Demetron, USA) with two types of light guide was used: a 12 mm diameter light guide with 840 nW/$cm^2$ light intensity and a 7 mm diameter turbo light guide with 1100 nW/$cm^2$. Specimens were divided into three groups according to thickness of penetrating tooth (1 mm, 2 mm, 0 mm). Each group was further divided into four subgroups according to type of light guide and curing time (20 seconds, 40 seconds). Vickers' hardness was measured by using a microhardness tester. In 0 mm and 1 mm penetrating tooth group, which were polymerized by a turbo light guide for 40 seconds, showed the highest hardness values. The specimens from 2 mm penetrating tooth group, which were polymerized for 20 seconds, demonstrated the lowest hardness regardless of the types of light guides (p < 0.05). The results of this study suggest that, when projecting tooth material over a specified thickness, the increase of polymerization will be limited even if light intensity or curing time is increased.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.551-574
• /
• 2014

The occurrence, distribution, and hydrogeochemical characteristics of uranium and radon in groundwater within different lithologies in Gyeongnam and Gyeongbuk provinces were investigated. A total of 201 groundwater samples from sedimentary rocks taking a large portion of the geology and from igneous rocks taking a small portion of the geology were analyzed and examined using factor analysis. Their radionuclide levels were used to construct detailed concentration maps. The groundwater types, defined using a Piper diagram, are mainly Ca-$HCO_3$ with less Na-$HCO_3$. Among the samples, one site exceeds $30{\mu}g/L$ of uranium (i.e., the maximum contaminant level of the USEPA) and three sites exceed 4,000 pCi/L of radon (i.e., the alternative maximum contaminant level). No samples were found to exceed the 15 pCi/L level of gross alpha or the 5 pCi/L level of radium. The concentration of uranium ranges from 0.02 to $53.7{\mu}g/L$, with a mean of $1.56{\mu}g/L$, a median of $0.47{\mu}g/L$, and a standard deviation of $4.3{\mu}g/L$. The mean concentrations of uranium for the different geological units increase in the following order: Shindong Group, Granites, Hayang Group, Yucheon Group, and Tertiary sedimentary rocks. The concentration of radon ranges from 2 to 8,740 pCi/L, with an mean of 754 pCi/L, a median of 510 pCi/L, and a standard deviation of 907 pCi/L. The mean radon concentrations for the investigated geological units increase in the following order: Granites, Yucheon Group, Tertiary sedimentary rocks, Hayang Group and Shindong Group. According to the factor analysis for each geological unit, uranium and radon behave independently of each other with no specific correlation. However, radionuclides show close relationships with some components. Regional investigations of radionuclides throughout the country require an integrated approach that considers the main lithological units as well as administrative districts.

• Korean Journal of Poultry Science
• /
• v.6 no.1
• /
• pp.12-23
• /
• 1979

This experiment was carrid out to investigate the interaction between boilelr strains and nutrition levels, and the performances of four broiler strains such as Han Hyup 603, Hubbard, Anak and Filch when they were fed by four different nutrition levels (High Protein and energy; HP. HE., Medium Protein and energy; MP. ME., Low Protein ana energy; LP. LE., and low protein and energy; LLP. LLE.). The data used in this study were obtained from a total of 1200 broiler type chicks in Poultry Testing Station, Korean Poultry Association from June 16, to August 11, 1978. Differences of all characters among four nutrition levels were significant except viability and carcass rate. HP. HE and MP. ME treatments showed nearly the same performances in body weight, feed efficiency and point, spread but they were significantly superior to those of LP. LE and LLP. LLE. There were not significant differences among four strains in feed efficiency and viability but other characters, body weight, point spread and carcass rate were observed that the performance of the best strain B was significantly superior to strain D but it was not recognized significance compared with strain A, C in tile result of statisticel analysis. In the interaction between strains and nutrition levels, body weight at high and levels showed significantly differences but at low and low nutrition levels were nearly same among four strains. Therefore this study demonstrated that comparision of body weights between strains should be performed at medium nutrition level or above. Also point spread calculated as index of body weight and feed efficiency was observed that strain B at low nutrition level is excellently higher than other strains and there were little differences at low nutrition level among all strains. It was found that ]it tie differences between performances of high arid medium levels seemed to be as the reason of high fat addition for energy source to high mutrition feed, and in general superior strain showed good performance at all the nutrition levels in$.$all characters but in body weight and point spread there were significantly different responses with different nutrition level, The most superior strain B among four strains earned the most profit per bird, Although performances of high and medium nutrition levels were nearly the same, medium nutrition level also showed the most profit because the feed cost of high nutrition level was higher than that of medium nutrition level.

• Journal of the Korean Arthroscopy Society
• /
• v.12 no.1
• /
• pp.24-31
• /
• 2008

Purpose: We purposed to analyze the incidence and the patterns of the injuries associated with anterior cruciate ligament(ACL) tears. Materials and Methods: We retrospectively reviewed 547 knees that had undergone ACL reconstructions and compared the associated injuries according to the time of injury(acute vs. chronic), the cause of injury(sports vs. non-sports) and the type of sports. Results: Medial collateral ligament(MCL) injury and bone contusion were more in acute injury group less than 3 months after trauma(p=0.001, 0.019) and the injuries of medial or lateral meniscus were more in chronic injury group more than 3 months after trauma(p=0.014, 0.029). The trochlea in acute injury group(p=0.027) and the medial femoral condyle in chronic injury group(p=0.011) had higher incidence of chondral injury. Grade I, II chondral injury was frequent in acute injury group(p=0.016) and grade III, IV chondral injury was frequent in chronic injury group(p=0.017). Lateral meniscus injury was frequent in sports injury group(P=0.035). Medial collateral ligament injury was frequent in ski(P=0.005), and chondral injury was in gymnastics(P=0.017). Conclusions: The incidences of medial and lateral meniscus tears and grade III, IV chondral defects were high in chronic injury group. According to the causes of the tears and the types of sports, some differences in the incidence and pattern of associated injuries were found.