• 한국환경과학회지
• /
• 제15권8호
• /
• pp.701-718
• /
• 2006

The average ratio of the daily UV-B to total solar (75) irradiance at Busan (35.23$^{\circ}$N, 129.07$^{\circ}$E) in Korea is found as 0.11%. There is also a high exponential relationship between hourly UV-B and total solar irradiance: UV-B=exp (a$\times$(75-b))(R$^2$=0.93). The daily variation of total ozone is compared with the UV-B irradiance at Pohang (36.03$^{\circ}$N, 129.40$^{\circ}$E) in Korea using the Total Ozone Mapping Spectrometer (TOMS) data during the period of May to July in 2005. The total ozone (TO) has been maintained to a decreasing trend since 1979, which leading to a negative correlation with the ground-level UV-B irradiance doting the given period of cloudless day: UV-B=239.23-0.056 TO (R$^2$=0.52). The statistical predictions of daily total ozone are analyzed by using the data of the Brewer spectrophotometer and TOMS in East Asia including the Korean peninsula. The long-term monthly averages of total ozone using the multiplicative seasonal AutoRegressive Integrated Moving Average (ARIMA) model are used to predict the hourly mean UV-B irradiance by interpolating the daily mean total ozone far the predicting period. We also can predict the next day's total ozone by using regression models based on the present day's total ozone by TOMS and the next day's predicted maximum air temperature by the Meteorological Mesoscale Model 5 (MM5). These predicted and observed total ozone amounts are used to input data of the parameterization model (PM) of hourly UV-B irradiance. The PM of UV-B irradiance is based on the main parameters such as cloudiness, solar zenith angle, total ozone, opacity of aerosols, altitude, and surface albedo. The input data for the model requires daily total ozone, hourly amount and type of cloud, visibility and air pressure. To simplify cloud effects in the model, the constant cloud transmittance are used. For example, the correlation coefficient of the PM using these cloud transmissivities is shown high in more than 0.91 for cloudy days in Busan, and the relative mean bias error (RMBE) and the relative root mean square error (RRMSE) are less than 21% and 27%, respectively. In this study, the daily variations of calculated and predicted UV-B irradiance are presented in high correlation coefficients of more than 0.86 at each monitoring site of the Korean peninsula as well as East Asia. The RMBE is within 10% of the mean measured hourly irradiance, and the RRMSE is within 15% for hourly irradiance, respectively. Although errors are present in cloud amounts and total ozone, the results are still acceptable.

• Journal of Ginseng Research
• /
• 제41권4호
• /
• pp.572-577
• /
• 2017

Background: Panax ginseng Meyer is cultivated because of its medicinal effects on the immune system, blood pressure, and cancer. Major ginsenosides in fresh ginseng are converted to minor ginsenosides by structural changes such as hydrolysis and dehydration. The transformed ginsenosides are generally more bioavailable and bioactive than the primary ginsenosides. Therefore, in this study, hydrothermal processing was applied to ginseng preparation to increase the yields of the transformed ginsenosides, such as 20(S)-Rg3, Rk1, and Rg5, and enhance antioxidant activities in an effective way. Methods: Ginseng extract was hydrothermally processed using batch reactors at $100-160^{\circ}C$ with differing reaction times. Quantitative analysis of the ginsenoside yields was performed using HPLC, and the antioxidant activity was qualitatively analyzed by evaluating 2,2'-azino-bis radical cation scavenging, 2,2-diphenyl-1-picrylhydrazyl radical scavenging, and phenolic antioxidants. Red ginseng and sun ginseng were prepared by conventional steaming as the control group. Results: Unlike steaming, the hydrothermal process was performed under homogeneous conditions. Chemical reaction, heat transfer, and mass transfer are generally more efficient in homogeneous reactions. Therefore, maximum yields for the hydrothermal process were 2.5-25 times higher than those for steaming, and the antioxidant activities showed 1.6-4-fold increases for the hydrothermal process. Moreover, the reaction time was decreased from 3 h to 15-35 min using hydrothermal processing. Conclusion: Therefore, hydrothermal processing offers significant improvements over the conventional steaming process. In particular, at temperatures over $140^{\circ}C$, high yields of the transformed ginsenosides and increased antioxidant activities were obtained in tens of minutes.

• 대한전자공학회논문지SD
• /
• 제37권12호
• /
• pp.11-17
• /
• 2000

저압 유기금속화학기상증착법을 이용하여 효율적인 청색 발광을 하는 InGaN/GaN multiple quantum wells(MQWs)을 성장시키고, InGaN/GaN MQWs의 광학적 및 계면 구조 특성을 고찰하였다. 보다 효율적인 청색 발광을 하는 InGaN/GaN MQWs을 성장시키기 위하여, MQWs의 성장온도 및 InGaN 우물층과 GaN 장벽층의 두께를 변화시켜 최적 조건을 확립하였다. 특히, GaN 장벽층의 두께 변화가 InGaN 우물층과 GaN 장벽층간 계면의 구조적 특성에 지대한 영향을 미침을 확인하였다. X-ray 회절분석결과와 고분해능의 투과전자현미경 사진 분석으로부터 MQW 구조의 InGaN 우물층과 GaN 장벽층간의 계면이 매우 급준함을 발견할 수 있었다. 또한, 상온 PL 스펙트럼에서 72.6meV의 매우 좁은 반치폭을 갖는 단일 피크가 463.5nm에서 확인되었다.

• 한국응급구조학회지
• /
• 제11권2호
• /
• pp.51-66
• /
• 2007

Purpose: With a view to providing basic data to develop cardiopulmonary resuscitation education suitable for elementary students, the cardiopulmonary resuscitation education was conducted to grasp students' knowledge, skills accuracy and the attitude change before and after the education. Methods: Convenience sampling was made on fourth and fifth graders(total-35 students) of S elementary school located in K city, Chungcheongnam-do, and this was a pre-experiment research designed before and after choosing a single group. In terms of methods, specifically we, researchers ; 1) Handed out questionnaires to students directly to make them fill in firsthand and collected the questionnaires. 2) Utilized PPT materials based on 2005 AHA guideline and DVD materials of AHA, to give students theoretical education of cardiopulmonary resuscitation. We used Anne/SkillReporter$^{(R)}$ torso produced by Leardal Inc, and Little Anne to conduct practical education individually. 3) Asked students to give Anne/SkillReporter$^{(R)}$ torso cardiopulmonary resuscitation five times with the ratio of 30 : 2, and then one of researchers filled in the evaluation sheet individually. 4) Evaluated the accuracy of students' ability to perform the resuscitation based on the record of Anne/SkillReporter$^{(R)}$ integrated printer(which was the objective tool to grasp students' skills accuracy). 5) Gave out questionnaires to make students fill them in and then collected them. after completing the practical evaluation. Results: 1) In case of the attitude about cardiopulmonary resuscitation, Students' confidency rose from 19.28%(before the education) to 93.57(after the education)- which is a positive change. 2) As the result of the education, some elementary students scored 11 points (full score-16 points), up from 5 points before the education, in terms of the knowledge about cardiopulmonary resuscitation. The average point also reached 13.14 points(after the education), jump from 8.37(before the education), which was the rise of 29.8%. 3) When it comes to the practical performance, the skills accuracy was 80.93% on average, and the calculation method was as follows: total items were 16, and each item was marked form 0 to 2 points, meaning the full score was 32 points. The minimum score was 19 points and the maximum was 32($M{\pm}SD=25.90{\pm}2.88$), which was calculated based on percentage. 4) Regarding skills accuracy, respiration accuracy(%)($M{\pm}SD=30.20{\pm}27.16$) was higher than pressure accuracy(%) ($M{\pm}SD=15.34{\pm}25.27$). Conclusion: The result showed that students' attitude on cardiopulmonary resuscitation changed positively. and meaningful difference(p = .00) existed in the change of students' knowledge. In terms of skills accuracy. chest compression and airway control showed high accuracy, but the result of Anne/SkillReporter$^{(R)}$ performance showed that the accuracy of chest compression was lower than that of mouth-to-mouth resuscitation.

• 대한치과보철학회지
• /
• 제39권3호
• /
• pp.243-249
• /
• 2001

Statement of the problem. The interest in all-ceramic restorations has increased as more techniques have become available. With the introduction of machinable dental ceramics and CAD/CAM systems or Copy-milling systems there is a need for evaluating the quality levels of these new fabrication techniques. Purpose. This study was to evaluate the fitting accuracy of machined all-ceramic crowns made out of an industrially prefabricated feldspathic porcelain. Material and Methods. Three master models with different cutting depth (0.8mm/1.0mm/1.2mm)were produced using a palladium-silver alloy. A total of 36 working dies, 12 of each form, was used for the modellation of prototype resin copings and 36 additional crowns, 12 of each cutting depth, were produced by using the $CEREC^{(R)}2$ system for all crowns. The maginal fit of all 72 crowns was then evaluated on their respective master die at 54 circularly staggered points of measurement per crown under a fixation pressure of 30 N by using a computerized video image system. Results. The medians of the copy-milled $CELAY^{(R)}$ crowns ranged from 29 to $36{\mu}m$. The highest value for the marginal gap was found in group B (cutting depth 1.0mm) at $107{\mu}m$. The median for the $CEREC^{(R)}2$ crowns was found between 43.5 and $70{\mu}m$. The maximum values for all three groups ranged from $181{\mu}m$ to $286{\mu}m$. With $286{\mu}m$ the highest value for marginal gap was found in group C. the Kruskal-Wallis test and multiple comparisons analysis procedure revealed a significant influence of the production technique on the marginal fit in all three groups (p<0,02). Conclusion. 1. The $CELAY^{(R)}$ system is capable to produce all-ceramic crowns with a significantly better marginal fit than the $CEREC^{(R)}2$ system. 2. As far as premolar crowns produced with the $CEREC^{(R)}2$ system are concerned, the cutting depth has a significant influence on fitting accuracy. 3. The production of crowns with an acceptable marginal fit is possible with both systems. However, adhesive luting is recommended for milled feldspathic porcelain crowns.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.477-477
• /
• 2008

For more than three decades, the gate dielectrics in CMOS devices are $SiO_2$ because of its blocking properties of current in insulated gate FET channels. As the dimensions of feature size have been scaled down (width and the thickness is reduced down to 50 urn and 2 urn or less), gate leakage current is increased and reliability of $SiO_2$ is reduced. Many metal oxides such as $TiO_2$, $Ta_2O_4$, $SrTiO_3$, $Al_2O_3$, $HfO_2$ and $ZrO_2$ have been challenged for memory devices. These materials posses relatively high dielectric constant, but $HfO_2$ and $Al_2O_3$ did not provide sufficient advantages over $SiO_2$ or $Si_3N_4$ because of reaction with Si substrate. Recently, $HfO_2$ have been attracted attention because Hf forms the most stable oxide with the highest heat of formation. In addition, Hf can reduce the native oxide layer by creating $HfO_2$. However, new gate oxide candidates must satisfy a standard CMOS process. In order to fabricate high density memories with small feature size, the plasma etch process should be developed by well understanding and optimizing plasma behaviors. Therefore, it is necessary that the etch behavior of $HfO_2$ and plasma parameters are systematically investigated as functions of process parameters including gas mixing ratio, rf power, pressure and temperature to determine the mechanism of plasma induced damage. However, there is few studies on the the etch mechanism and the surface reactions in $BCl_3$ based plasma to etch $HfO_2$ thin films. In this work, the samples of $HfO_2$ were prepared on Si wafer with using atomic layer deposition. In our previous work, the maximum etch rate of $BCl_3$/Ar were obtained 20% $BCl_3$/ 80% Ar. Over 20% $BCl_3$ addition, the etch rate of $HfO_2$ decreased. The etching rate of $HfO_2$ and selectivity of $HfO_2$ to Si were investigated with using in inductively coupled plasma etching system (ICP) and $BCl_3/Cl_2$/Ar plasma. The change of volume densities of radical and atoms were monitored with using optical emission spectroscopy analysis (OES). The variations of components of etched surfaces for $HfO_2$ was investigated with using x-ray photo electron spectroscopy (XPS). In order to investigate the accumulation of etch by products during etch process, the exposed surface of $HfO_2$ in $BCl_3/Cl_2$/Ar plasma was compared with surface of as-doped $HfO_2$ and all the surfaces of samples were examined with field emission scanning electron microscopy and atomic force microscope (AFM).

• 농업과학연구
• /
• 제19권1호
• /
• pp.97-102
• /
• 1992

동력경운기(動力耕耘機) 탑재용(搭載用) 디젤 기관(機關)은 정격출력(定格出力)에 작업(作業)할 때 과열(過熱)되어 농민(農民)들은 작업(作業) 시작전(始作前)에는 필(必)히 냉각수(冷却水)를 보충(補充)해야 하는 것으로 알고있다. 따라서 기관(機關)이 과열(過熱)되는 것을 해결(解決)하기 위해서는 냉각(冷却)시스템의 개선(改善)이 이루어져야 되는데 이를 위해서는 냉각(冷却)시스템의 기초적(基礎的)인 실험(實驗) 자료가 필요(必要)하다. 기관(機關)의 생산(生産)은 외국(外國)과의 기술(技術) 제휴(提携)에 의하여 제작(製作)하고 있어 자료(資料)가 부족(不足)한 실정(實情)이므로 적합(適合)한 설계(設計)를 위해서는 현재(現在)의 기관(機關)에 사용(使用)되고 있는 냉각(冷却)홴, 라디에타등(等) 냉각장치(冷却裝置)에 대한 실험(實驗)을 실시(實施)하였다. 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 동력경운기(動力耕耘機) 탑재용(搭載用) 7.5kW 디젤기관(機關)의 정격출력시(定格出力時)에 냉각(冷却)홴의 효율(效率)은 49.9%로 비교적(比較的) 양호(良好)하였다. 2. 기관(機關)의 정격출력(定格出力)(상용회전(常用回轉))시(時) 홴의 소요동력(所要動力)은 최대(最大) 0.5kW이었다. 3. 기관(機關)의 정격출력(定格出力)(상용회전(常用回轉))시(時) 홴의 송풍량(送風量)은 $12.9m^3/min$이었다. 4. 기관(機關)의 정격출력(定格出力)(상용회전(常用回轉))시(時) 홴의 송풍정압(送風靜壓)은 29.8mmHg이었다.

• 생명과학회지
• /
• 제16권4호
• /
• pp.640-646
• /
• 2006

비브리오식중독의 피해를 저감시키는 기능성 식품소재를 개발하기 위하여, 예비실험에서 V. parahaemolyticus균에 항균활성이 우수한 것으로 밝혀진 탱자와 매실의 최적 추출조건을 조사하였다. 먼저, 열수로 추출한 실험에서 탱자의 최적 조건은 $80{\sim}100^{\circ}C$에서 30분간, 매실의 경우 $100^{\circ}C$에서 30분간 가열 추출한 시험액의 저지환이 각각 14.8 및 16.6 mm로써, 최대의 항균활성을 나타내었다. 또한 NaOH, $K_2CO_3$ 및 $NaHCO_3$의 알칼리 식품첨가물을 첨가하여 추출한 실험에서, NaOH를 첨가한 경우 탱자의 항균활성은 증진되지 않았으나 매실의 항균활성은 다소 증진되었으며, NaOH 이외 알칼리들은 공시 식물체들의 항균활성을 감소시켰다. NaOH의 첨가농도를 단계적으로 달리하고 80, 100 및 $120^{\circ}C$에서 추출한 결과, 탱자의 경우 앞서의 열수추출 결과와 별다른 차이가 없었으나, 매실은 NaOH를 0.05N 농도로 첨가하고 $120^{\circ}C$ 에서 추출한 조건에서 저지환 직경 19.9 mm의 최대 항균활성을 나타내었다. 탱자와 매실을 주정으로 진탕추출하고 주정을 제거하여 주정추출물을 얻었다. 이 추출물에 NaOH를 단계적으로 첨가하고 $100^{\circ}C$에서 30분간 물로 재추출한 결과, 주정추출물의 항균활성은 전반적으로 물추출한 결과보다 낮고 NaOH의 첨가량이 많을수록 활성의 감소를 나내었다. 따라서 본 실험에서, 탱자의 최적추출조건은 $80{\sim}100^{\circ}C$의 열수로 30분간, 매실은 NaOH를 0.05N 농도로 첨가한 $120^{\circ}C$의 열수로 30분간 추출하는 것이 가장 효율적이라는 결론을 얻었다.

• 한국지반공학회논문집
• /
• 제29권2호
• /
• pp.47-56
• /
• 2013

포화토의 개념과 원리로는 실제 지반에서 발생하는 현상과 거동이 제대로 해석되지 않는 많은 공학적 문제들이 있다. 불포화토는 부간극수압의 영향으로 겉보기점착력을 보임과 동시에 물의 흐름에 있어서 간극 속에 공기의 함입으로 투수성이 저하하는 등 포화토와는 다른 거동특성을 나타내는 것으로 알려져 있다. 따라서 흙 속의 수분 함량에 따른 공학적 특성을 규명하는 것은 지반강도의 산정, 구조물의 안정성 등을 판단하는데 있어서 중요한 자료를 제공하므로 많은 연구와 노력이 필요하다. 특히, 하천복원 프로젝트인 "4대강 살리기"중 한 곳인 낙동강유역에는 모래 지반이 넓은 지역에 걸쳐 분포하고 있으며, 중소규모의 댐, 홍수조절지, 하천변 저류지 및 저수지 재개발 등 많은 토목구조물이 건설되고 있다. 본 연구에서는 낙동강유역 내 불포화상태에 있는 지반구조물의 설계 시공 및 안정성 검토에 기초적 자료를 제공하고자 낙동강 중하류 실트질 모래를 대상으로 불포화 삼축압축시험을 실시하였다. 시험 결과 최대축차응력은 구속압과 흡인력이 증가함에 따라 증가하는 것으로 나타났다. 또한 점착력은 흡인력의 증가에 따라 비선형적으로 증가하였으나, 내부마찰각은 크게 변하지 않는 것으로 나타났다.

• 한국지반환경공학회 논문집
• /
• 제7권2호
• /
• pp.67-76
• /
• 2006

본 논문은 수직 절리가 잘 발달된 지하수위가 높은 화산암질 지반에서 직경 3.3m의 도수터널 굴착을 하는 수력발전소 건설공사 내용이다. 취수시설은 발전소로부터 20.3km 상류에 위치하고 있으며, 20km의 도수터널과 연결되어 있고 440m의 낙차고를 갖는 펜스탁이 발전소와 연결되어 있다. 현장의 지질 조건은 전형적인 칼데라 호수인 토바호에 의해 지반 침식과 수직방향의 인장균열이 발달하였으며 이로 인해 지반의 초기응력이 이완되었다. 높은 지하수위(최대 수두 200m)를 가진 잘 발달된 수직 절리를 터널이 관통하면서 막대한 양의 지하수가 터널내로 유입되었다. 터널 굴착은 개방형 쉴드 TBM과 버럭반출에는 철로와 기관차를 사용하였다. 터널 내로의 유입수가 터널 바닥면에서 70cm 높이에 다다르고 이는 터널 직경(3.9m)의 17%에 해당하였다. 생산성을 향상하기 위해서 TBM과 버럭반출 차량과 같은 몇 가지의 개선과 수중펌프를 증설하는 방안을 사용하였다. 굴착 중에 만난 지반 조건이 설계보다 상당히 불량하여 RC라이닝에서 지하수 유입, 암반조건, 수압 등에 따라 PC 세그먼트 라이닝 또는 PC 세그먼트 라이닝과 현장타설 RC 라이닝, RC 라이닝, 그리고 강재 라이닝이 적용되었다. 이 PC 세그먼트 라이닝의 도입과 TBM과 다른 장비의 개조 및 개선을 통해서 심각한 지하수 조건 하에서 터널 굴착 공사를 성공적으로 완료하였다.