• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.3 s.120
• /
• pp.241-248
• /
• 2007

A study has been conducted to investigate the subjective responses of loudness and annoyance according to the exposed time of urban traffic noise in controlled laboratory environment. To make a closer inspection into psychological response relevant to noise characteristics while varying the time of exposure to noise, the subjects were presented a set of noises with different exposed time and requested to judge spontaneously on a 100-unipolar scale. To be concrete, the subjects were exposed to noises being varied in time from 15 sec up to max. 1,200 sec for the controlled traffic noise sources. So far achieved from laborious tests, it has an importance being on the logarithmic relations of perceived loudness and exposed time, say, it is more increased the perceived loudness in the sorter exposed time than in the longer exposed time. However, the trend is said to be not effective for the case of annoyance. On the other hand, the subjective impressions on relative annoyance of noise is shown to be correlated with the noise characteristics such as loudness (sones), tonality and time with logarithmic scale, the product correlation moment being calculated as $R^{2}=0.99$. The variances to be explained for annoyance assessments through varying the time of exposure were ranged between 30 % and 50% for the exposed time, $27{\sim}37%$ for tonality, and $34{\sim}20%$ for loudness, respectively With these results, hopefully, it can be helpful for those who want to work out an experimental design for evaluating an environmental noise or to quantify any psychological dimensions found in annoyance assessments.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.3
• /
• pp.410-418
• /
• 2019

To investigate a novel ${\beta}$-glucosidase from Bifidobacterium breve ATCC 15700 (BbBgl) to produce compound K (CK) via ginsenoside $F_2$ by highly selective and efficient hydrolysis of the C-3 glycoside from ginsenoside Rd, the BbBgl gene was cloned and expressed in E. coli BL21. The recombinant BbBgl was purified by Ni-NTA magnetic beads to obtain an enzyme with specific activity of 37 U/mg protein using pNP-Glc as substrate. The enzyme activity was optimized at pH 5.0, $35^{\circ}C$, 2 or 6 U/ml, and its activity was enhanced by $Mn^{2+}$ significantly. Under the optimal conditions, the half-life of the BbBgl is 180 h, much longer than the characterized ${\beta}$-glycosidases, and the $K_m$ and $V_{max}$ values are 2.7 mM and $39.8{\mu}mol/mg/min$ for ginsenoside Rd. Moreover, the enzyme exhibits strong tolerance against high substrate concentration (up to 40 g/l ginsenoside Rd) with a molar biotransformation rate of 96% within 12 h. The good enzymatic properties and gram-scale conversion capacity of BbBgl provide an attractive method for large-scale production of rare ginsenoside CK using a single enzyme or a combination of enzymes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.3
• /
• pp.195-205
• /
• 2020

This study addresses analysis on reactions which are induced in restraint system for airframe full-scale static structural test. This system restraints 6 degrees of freedom of a test article. It is valuable to study evaluating test error through analysis on the reactions which include all errors in a test. It is required to calculate fistly right reactions for the evaluation. This study focuses on calculation of the right reactions. The reaction is represented by sum of nominal reaction(Rn) and testing error reactions(Rce, Rerr) and is analyzed by two steps (inital vs relative reaction) in this study. It would evaluate intrinsic error at 0%DLL and error induced from applying test load, separately. Based on analysis using test data of a full-scale static test(canard type aircraft), resultant force of Rces and Rce_rs are distributed within 82.8N while resultant force of Rerr_rs shows to increase upto max. 808N as load level increment. Such well distribution of the Rce within the small range is caused from TMF values characteristics which are well distributed within -30N~40N. Additionally, it is shown through qualitative analysis on three components(X0, Y0, Z0) of the relative reaction(Rerr_r) that the reactions must be calculated with considering deformation of test article to calculate correctly reactions. This study shows also that equations characterizing deformation of components of test article are required to calculate the correct reactions, the equations must include information which will be used to calculate movement of all loading points.

• Journal of Environmental Science International
• /
• v.26 no.6
• /
• pp.729-739
• /
• 2017

The Weather Research and Forecasting (WRF) model and Vegetation Photosynthesis and Respiration Model (VPRM) were coupled to simulate atmospheric $CO_2$ concentrations. The performance of the WRF-VPRM to simulate regional scale $CO_2$ concentration was estimated over coastal basin areas. Either Hestia 2011(HST) or Vulcan 2002(VUL) anthropogenic $CO_2$ emission data were used in two numerical experiments for the study regions. Simulated meteorological variables were validated with ground and background $CO_2$ measurement data, and the results show that the model captured temporal variations of $CO_2$ concentration on a daily basis. $CO_2$ directional analysis revealed that the dominant $CO_2$ emission sources are located S and SW. The simulated Net Ecosystem Exchange (NEE) agreed relatively well with measured $CO_2$ fluxes at each vegetation class site, showing approximately 40% at max improvement at shrub areas.

• Journal of Korean Society of Forest Science
• /
• v.97 no.2
• /
• pp.144-151
• /
• 2008

Using 8 isozyme polymorphic loci as gene markers, we studied the spatial distribution of genotypes in a naturally regenerated uneven-aged Eastern Siberian Fir (Abies nephrolepis Max.) stand (1ha, $100{\times}100m$) on Mt. Ohdae in northeastern South Korea. Gregorius' distograms and Moran's I correlograms revealed no evidence of significant genetic structure at three spatial classes of 5 m, 10 m, and 20 m. Extensive gene flow, due to the long distance dispersal of pollen and seeds in A. nephrolepis, may account for the lack of fine-scale spatial structure. Alternatives would be overlapping seed shadows caused by high densities of A. nephrolepis adult trees (160 trees/ha) and/or intraspecific competition resulting in extensive thinning within maternal half-sib groups.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.7
• /
• pp.833-847
• /
• 2010

In the past decade, there have been many advances in whole-genome sequencing in domestic animals, as well as the development of "next-generation" sequencing technologies and high-throughput genotyping platforms. Consequently, these advances have led to the creation of the high-density SNP array as a state-of-the-art tool for genetics and genomics analyses of domestic animals. The emergence and utilization of SNP arrays will have significant impacts not only on the scale, speed, and expense of SNP genotyping, but also on theoretical and applied studies of quantitative genetics, population genetics and molecular evolution. The most promising applications in agriculture could be genome-wide association studies (GWAS) and genomic selection for the improvement of economically important traits. However, some challenges still face these applications, such as incorporating linkage disequilibrium (LD) information from HapMap projects, data storage, and especially appropriate statistical analyses on the high-dimensional, structured genomics data. More efforts are still needed to make better use of the high-density SNP arrays in both academic studies and industrial applications.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1548-1549
• /
• 2011

High voltage cryogenic insulation issues need to be addressed in order to promote the commercialization of high temperature superconducting (HTS) equipment. As a fundamental step in the development of the optimum bushings for HTS devices, the breakdown characteristics of liquid nitrogen mixed with liquefied insulating gases such as $N_2$, $SF_6$, and $CF_4$ have been investigated. In order to investigate the possibility of substituting $CF_4$ gas for $SF_6$ gas for the bushings of HTS electrical equipment, AC withstanding voltage tests have been performed. In this paper, finding the maximum electric field $E_{max}$ using utilization factor ${\eta}$. This result is applicable to developing the real scale HTS equipment of the design parameters.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.1
• /
• pp.1-9
• /
• 2012

Purpose : This study aimed to compare the effect of two modes (proprioceptive neuromuscular facilitation combination patterns and ball exercise) of low back stability for chronic low back patients. Methods : The subjects were recruited fourty patients who had low back pain. All subjects were randomly assigned to PNF combination patterns group, ball exercise group. Measurements were performed fourtimes: pre test, 2weeks, 4weeks, and 6weeks. Main outcome measures comprised the visual analogue scale(VAS), balance performance monitor(BPM). Results : The results were as follows. In the comparison of VAS score, sway area, sway path, and sway velocity according treatment period, score was significantly reduced in both PNF combination pattern group and ball exercise group. In the comparison of the both VAS and sway area between groups, there were significant. PNF combination pattern group significantly more decrease than ball exercise group at 6 weeks. However, both sway path and sway max velocity between group, there were not significantly. Conclusion : These results of this study indicated that PNF combination pattern which performed for six weeks had a significant influence than ball exercise group on low back pain.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.605-608
• /
• 2001

Molybdenum disilicide is widely used for manufacturing high-temperature heating elements owing to its low electrical resistivity, good thermal conductivity, and ability to withstand oxidation at high temperatures. MoSi$_2$heating elements with 4-5wt% of montmorillonite type bentonite as plasticzer and a small amount of Si$_3$N$_4$, ThO$_2$, and B as additives was manufactured. Extruded rods of 3.7mmø and 6.7mmø diameter and 400mm long were fabricated using a vacuum extruder, which were then sinrered for 4-5 hrs. at the max. temperrature of 140$0^{\circ}C$. After 10 minute's oxidation treatment, the diameter of the rod is reduced. The heating elements thus prepared was stable at 1$700^{\circ}C$ and the physical properties such as specific electrical resistivity, hardness, apparent densisty, thermal expansion coefficient, and bending strength were almost identical with thoes of commercial heating elements. In this study we have tried to gain the practical knowledge of manufacturing MoSi$_2$heating elements so that it may be utilized later in a research of pilot scale and eventually be transferred to industry.

• Journal of Korea Foundry Society
• /
• v.34 no.3
• /
• pp.87-93
• /
• 2014

Thixo-extrusion of semi-solid 7075 aluminum alloy and the mechanical properties of its extrudates were investigated. The semisolid alloy was prepared by a cooling slope cast. In other to perform thixo-extrusion, semi-solid 7075 aluminum alloy billets were reheated at the reheating conditions reported in a previous study. The maximum extrusion pressure in thixo-extrusion was 615MPa. This was lower than that of conventional hot extrusion ($P_{max}=940MPa$) at the same extrusion conditions due to the increased fluidity of the alloy billet in the semi-solid state. The values of Rockwell hardness (scale B) at the extrusion direction of the as thixoextruded bar were 48~53HRB and the difference in Rockwell hardness between the transverse direction and the extrusion direction was 5HRB or less. The results show that thxio-extrusion of semi-solid 7075 Al alloy improves the workability and anisotropic with the extrusion direction compared with hot extrusion of the conventional alloy.