• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5007-5014
• /
• 2010

Recently n Korea, the House of Commons and terrestrial broadcasting facilities integrated with FM radio and the satellite compulsory was amended to transfer MATV(Master Antenna Television) adjusted by SMATV(Satellite Master Antenna Television). While the SMATV was accepted by default in most other countries, our county did not accept it as the default for broadcast. Because domestic cable and satellite television service providers are conflicts with their interest. bAs a result, the hybrid amplifier for SMATV technology development and volume production for the state is insufficient. Therefore, terrestrial television broadcast bands (54 ~ 806Mhz) and FM radio broadcast band (88 ~ 108Mhz) band satellite with (950 ~ 2150Mhz) to amplify the development of a broadband amplifier with subsequent resolution of problems is also presented in this study.

• Journal of the Korean Institute of Navigation
• /
• v.11 no.2
• /
• pp.53-59
• /
• 1987

This paper describes the design theory of a weakly-coupled Tap-off with high density of coupling intervals for CATV and/or MATV systems, by which the degree of freedom in design and density of coupling intervals are significantly increased compared with the intrinsic one. It is also described how to construct the two-way divider (Tap-off) in the generalized type. Furthermore, the practical measurements of the frequency characteristics for a fabricated circuit show very good agreements with theoretical results.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1993.10b
• /
• pp.11-30
• /
• 1993

종래부터 CATV 또는 MATV시스템의 신호분기회로로 사용되어 오고 있는 Tap-off는 단지 실험적 경험적으로 제작되어 왔으며 이론적인 해석이나 엄밀한 설계법이 확립되어있지 않았기 때문에 그 성능에 있어서도 대역폭이 좁거나 분기 특성이 나쁜문제점등이 있었다 따라서 본 논문에서는 보조변성기가 부가된 변형된 약결합성 신호분기기를 제안하여 설계의 자유도를 높힘으로써 상당히 조밀한 결합간격의 회로구성이 가능한 설계법을 제안하고 그 주파수특성을 계산하여 제안한 변형된 신호분기기의 설계법의 유효함을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.499-508
• /
• 1993

This paper has dealt with the design methods and the analysis of frequency characteristics for the power splitters with ferrite toroids, which are extensively used in CATV and/or MATV systems. The theoretical design methods and frequency characteristics of the prototype Wilkinson's 2-way power divider have been reviewed in lumped-element circuits form. On the basis of the design theory of the prototype Wilkinson's power divider, the method compensating of the prototype Wilkinson's power divider has been proposed by means of adding matching transformers. Thus, it has been shown that the theoretical frequency characteristics of the compensated power splitter are improved drastically in comparison with the prototype Wilkinson's power divider. Furthermore, the practical measurements of the frequency characteristics for the fabricated circuits show agreements with the theoretical results, and hence, the validity of the proposed design and analysis methods has been confirmed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.115-122
• /
• 1987

In this paper, we proposed an improved weakly-coupled power divider(TAP UNIT) for CATV and/or MATV systems, by which the degree of freedom in design and density of coupling interval are signifcantly increased compared with the intrinsic one even though the turn ratios are still of discrete values. On the other hand, the new design theory of a generalized n-way power divider with arbitrary dividing ratios, for CATV and/or MATV systems, which consists of ideal multiwinding transformers and resistors only was presented. Since the circuit elements is not frequency dependent, the proposed power divider is to be of considerably broad bandwidth. Furthermore, the experimental verification has been achieved, and, hence, the validity of the design theory proposed here is confirmed.

• Information and Communications Magazine
• /
• v.8 no.3
• /
• pp.35-47
• /
• 1991

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.3
• /
• pp.425-433
• /
• 1994

The conventional weakly-coupled tap-off for CATV and/or MATV transmitting circuits has been fabricated empirically and experimentally. So, the theoretical analysis or the design method of the conventional one has not been established, the characteristics of which were not good. To solve these problems, we have proposed a modified weakly-coupled freedom in design. This paper describes the design theories and analysis method of the theoretical frequency characteristics of a Modified Weakly-coupled Tap-off with high density of coupling intervals for CATV and/or MATV system. From the theoretical analysis it has been shown that the frequency characteristics of the tap-off proposed here are improved much in comparision with the conventional one. Furthermore, the practical measurements of frequency characteristics for the fabricated circuits show agreement with the theoretical results, and hence, the validity of proposed design and analysis methods has been confirmed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.6
• /
• pp.998-1004
• /
• 1987

This paper describes the design theory of a weakly-coupled Tap-off with high density of coupling intervals for CATV ynd/or MyTV systyms, by yhich the degree of freedom in design and density of coupling intervals are significantly increased compared with the intrinsic one. It is also described how a 2-way power divider(Tap-off) is constructed in the generalized type. Furtuermore, the practical measurements of the frequency characteristics for a fabricated circuit show very good agreements with theoretical results, and, hence, the validity of the proposed design and analyses methods are confirmed.

• Journal of Korea Multimedia Society
• /
• v.13 no.10
• /
• pp.1525-1533
• /
• 2010

With the digital terrestrial television broadcasting transition, terrestrial television broadcasting have required the replacement of retransmission facilities for the analog broadcasting installed in the existing apartment, building, cable TV station, MATV system and so on. In addition, new standards have been enacted for retransmission of the digital television broadcasting in MATV system. To deal with this issue, in this paper, we propose a new 8-VSB remodulator that can retransmit signals of the terrestrial digital television broadcasting. Moreover, we present a standard and the process composition of the 8-VSB remodulator, and an experimental environment configuration for performance evaluation. To achieve this, we have implemented the 8-VSB remodulator with the sequential process components comprised of the RF signal retransmission, the TS stream modulator, the RF signal reception and demodulation. Through the simulation, we analyze the performance standard from the measured data such as spurious and phase noise. And then, we measure SNR and EVM of each attenuation step of the signal obtained by the signal processor and the 8-VSB remodulator with the same retransmission environment and conditions. Experimental results show that both the 8-VSB remodulator and the signal processor can be used as equipment for the retransmission of the terrestrial digital television broadcasting. In addition, the 8-VSB remodulator performed well to improve the transmission efficiency for the digital broadcasting signal, compare to the existing signal processor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.578-582
• /
• 1998

CATV(Cable Television) 및 MATV(MasterTelevision) 시스템용 방향성결합기의 광대역 설계법을 제안한다. 결합선로형 방향성결합기의 이론을 도입하여 그 이론을 변성기형에 적용, 해석법을 확립하고, 제안한 해석법의 타당성을 입증하기 위하여 시뮬레이션결과 및 실험결과를 비교 검토한다. 그 결과 주파수특성이 반사계수 20dB, isolation 25dB를 만족하는 신호분기기를 5∼2150 MHz까지 광대역화 하였다.