• 한국정보과학회논문지:시스템및이론
• /
• 제27권1호
• /
• pp.53-60
• /
• 2000

본 논문의 목적은 네트워크상에서 한 시스템의 요소가 결함으로 인해 통신장애를 일으키는 경우에 대하여 새로운 회복알고리즘을 제안하는 것이다. 또한 인접행렬을 사용하면서 그 알고리즘을 시뮬레이션한다. 우리는 제안된 알고리즘의 한 번 수행시 하나의 결함노드를 복구하도록 하여 결국 결함시스템을 점진적으로 통신가능한 네트워크로 재구성 할 수 있다. 그렇게 하기위해 본문에서는 인접행렬을 이용하며 시뮬레이션된 회복과정을 연결한 MATRECO라는 새로운 회복알고리즘을 제시하였다.

• Journal of applied mathematics & informatics
• /
• 제28권1_2호
• /
• pp.351-361
• /
• 2010

The solution of large sparse linear systems is one of the most important problems in large scale scientific computing. Among the many methods developed, the preconditioned Krylov subspace methods are considered the preferred methods. Selecting a suitable preconditioner with appropriate parameters for a specific sparse linear system presents a challenging task for many application scientists and engineers who have little knowledge of preconditioned iterative methods. The prediction of ILU type preconditioners was considered in [27] where support vector machine(SVM), as a data mining technique, is used to classify large sparse linear systems and predict best preconditioners. In this paper, we apply the data mining approach to the sparse approximate inverse(SAI) type preconditioners to find some parameters with which the preconditioned Krylov subspace method on the linear systems shows best performance.

• International Journal of Safety
• /
• 제2권1호
• /
• pp.23-27
• /
• 2003

Recently, continuous fiber reinforced ceramic composite(CFCC) has attracted attention to a number of engineers because of its significant benefit for several industrial area. This work was conducted to provide a basic characteristic of CFCC for tensile loading condition. The numerical analysis by general purpose finite element program was accomplished and compared with an experimental tensile test. The stress strain curves were expressed well by the numerical analysis and the first matrix cracking stress was in accordance with that of the experimental result. Moreover, fracture pattern was shown by kill command graphically.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.143-146
• /
• 2002

Mg alloy is the lightest material of structural materials and is noticed for lightweight automotive parts because of excellent castability, superior ductility and damping capacity than Al alloy. But Mg Alloy is poor corrosion resistance and high temperature creep properties. In this study, Mg Matrix Composites were fabricated by squeeze casting method to improve high temperature creep properties and damping capacity. Hybrid Mg composites reinforced with Alborex, graphite particle, and SiCp was improved creep properties and damping capacity compared with Mg alloy. Compared to the length ($9\mu\textrm{m}, 27\mu\textrm{m}, 45\mu\textrm{m} etc.$), Hybrid Mg composites reinforced with SiCp, one of the most superior of the length and Alborex were more superior than those reinforced with graphite particle and Alborex in mechanical properties, creep characteristics, and damping capacity, etc.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.27-31
• /
• 2001

Hi-Nicalon SiC fiber reinforced SiC composites (SiC/SiC) have been fabricated by the reaction sintering process. Braided Hi-Nicalon SiC fiber with double interphases of BN and SiC was used in this composite system. The microstructures and the mechanical properties of reaction sintered SiC/SiC composites were investigated through means of electron microscopies (SEM, TEM, EDS) and bending tests. The matrix morphology of reaction sintered SiC/SiC composites was composed of the SiC phases that the composition of the silicon and the carbon is different. The TEM analysis showed that the residual silicon and the unreacted carbon were finely distributed in the matrix region of reaction sintered SiC/SiC composites. Reaction sintered SiC/SiC composites also represented proper flexural strength and fracture energy, accompanying the noncatastrophic failure behavior.

• 한국세라믹학회지
• /
• 제27권4호
• /
• pp.457-464
• /
• 1990

This paper presents the influence of the loading rate on the room temperature fracture toughness of a brittle Al2O3 and a SiC whisker reinforced Al2O3 composite. Dynamic fracture toughness tests were conduced using compressive fatigue pre-cracked notched round bars loaded in tension to produce a stress intensity rate K1=106 MPa√m/sec. The experimental results show that for each loading rate the fracture toughness values obtained for the ceramic matrix composite are higher than the corresponding values for the single phase alumina. In addition, both the reinforced and unreinforced ceramic are singnificantly tougher under dynamic loading than static loading. This dynamic and quasi-static fracture initiation behaviro can be interpreted by identifying quantitatively the mode of fractuer initiation as a function of loading rate.

• Journal of the Korean Data and Information Science Society
• /
• 제12권1호
• /
• pp.89-97
• /
• 2001

Chen and Chen(FSS, 1993, 159-168) presented a reasonable analytical model of fuzzy closed-loop systems and proposed a method to analyze the stability of fuzzy control by the relational matrix of fuzzy system. Chen, Lu and Chen(IEEE Trans. Syst. Man Cybern., 1995, 881-888) formulated the sufficient and necessary conditions on stability of fuzzy closed-loop control systems. Gang and Chen(FSS, 1996, 27-34) deduced a linguistic relation model of a fuzzy closed loop control system from the linguistic models of the fuzzy controller and the controlled process and discussed the linguistic stability of fuzzy closed loop system by a linguistic relation matrix. In this paper, we study more on their models. Indeed, we prove the existence and uniqueness of equilibrium state $X_e$ in which fuzzy system is stable and give closed form of $X_e$. The same examples in Chen and Chen and Gang and Chen are treated to analyze the stability of fuzzy control systems.

• 한국미생물·생명공학회지
• /
• 제27권2호
• /
• pp.136-144
• /
• 1999

Since the condition of immobilization must be optimized, it is very important to know whether and on how conditions bacterial cells retain their metabolic activity during immobilization process. A bioluminescence intensity had the maximum value when cell concentrations were between 1.0 and 1.2 measured at O.D660. The strontium alginate was used as an immobilization matrix and two independent factors for immobilization of Photobacterium phosphoreum with strontium alginate were optimized with the response surface methodology(RSM) considering degree of bioluminescence. As a result, the optimum concentration for immobilization was found to be 2.4%(w/w) for sodium alginate and 0.31M for strontium chloride, respectively. A dilution was carried out with 2.5%(w/v) NaCl solution that is an optimum environmental condition for growth of P. phosphoreum. Under the such condition of immobilization, hardness could be predicted as 4.66$\times$104N/$m^2$ and it took different time according to the volume of matrix to be immobilized completely.

• International Journal of Contents
• /
• 제15권4호
• /
• pp.27-35
• /
• 2019

In this paper, we propose an advanced Minimum Mean Square Error (MMSE) channel estimation method for IEEE 802.11p/Wireless Access in Vehicular Environments (WAVE) systems. To improve the performance of MMSE method, we apply the Weighted Sum using Update Matrix (WSUM) scheme to the step of calculating the instantaneously estimated channel and then, a time domain selectively averaging method is applied after the WSUM scheme. Based on that, the accuracy of instantaneously estimated channel increases and then, the accuracy of auto covariance matrix also increases. Consequently, we can achieve the performance gain over the conventional MMSE method. Through simulations based on the IEEE 802.11p standard, it is confirmed that the proposed scheme can outperform the existing channel estimation schemes.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.26-27
• /
• 2016

This study is an experiment to know mechanical properties that matrix of the magnesium oxide-based can interior Radon gas absorption and decrease by the addition of Bentonite, Vermiculite, illite having characteristic of the cation-exchange and porous. As a study to examine the possibility was fixed the addition amount of each adsorbent that was added to the 0, 10, 20% of magnesium oxide and magnesium chloride with 25%. Illite, bentonite WB is 45 (wt,%), vermiculite W/B was carried out an experiment to 50 (wt,%).