• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1917-1922
• /
• 2010

Near-Field Communication (NFC) is a short-range wireless communication technology evolved from RFID especially for the exchange of data between active and passive devices. This paper presents the mathematical models for the signal path of a NFC transceiver system and a behavioral simulation platform using MATLAB simulink. The approximated mathematical models simplify the simulation complexity of a transceiver and provide a quick evaluation. With this calculation platform, we can evaluate the system performance caused by the noise and the non-linearity of the individual blocks, and caused by system variables such as Effective Number of Bits (ENOB) of ADC and filter cutoff frequency. This platform provides us with a rapid prototyping, a reliable system design, and an efficient risk management during development of the NFC transceiver ICs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5B
• /
• pp.449-454
• /
• 2009

In this paper, we analyze the hardware and software platform for constructing the USN in the vessel environment. Specifically, we analyze the mote technology based on the CC2420 in the hardware platform and analyze the TinyOS platform in the software platform. We also analyze the physical layer of IEEE802.15.4 which is the standard of the USN communication. In the simulation, we evaluate the performance in the physical layer of ZigBee/IEEE 802.15.4 by using the MATLAB and verify the validity of constructing the USN in the vessel environment based on the simulation results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.70-79
• /
• 2015

In this paper, enhanced stand-alone operation and development of Matlab/Simulink model of emergency diesel based hybrid energy system is presented. Simulations based on the remote community or islands were performed for PV-diesel-battery hybrid system. Modeling of PV-diesel-battery integrated system is done to perform under the solar radiation and load conditions on Matlab/Simulink platform. The models of diesel generator unit, battery energy storage system, PV and frequency-power control are developed and simulation studies have been carried out under various conditions using Matlab/Simulink and SimPowerSystem. It is demonstrated that the proposed system can provide reliable and good quality power to the customers in diesel synchronous generator-based hybrid energy systems.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.2
• /
• pp.121-128
• /
• 2008

Modularized GPS software defined radio (SDR) has many advantages of applying and modifying algorithm. Hardware based GPS receiver uses many hardware parts (such as RF front, correlators, CPU and other peripherals) that process tracked signal and navigation data to calculate user position, while SDR uses software modules, which run on general purpose CPU platform or embedded DSP. SDR does not have to change hardware part and is not limited by hardware capability when new processing algorithm is applied. The weakness of SDR is that software correlation takes lots of processing time. However, in these days the evolution of processing power of MPU and DSP leads the competitiveness of SDR against the hardware GPS receiver. This paper shows a study of modulization of GPS software platform and it presents development of the GNSS software platform using MATLAB Simulink™. We focus on post processing SDR platform which is usually adapted in research area. The main functions of SDR are GPS signal acquisition, signal tracking, decoding navigation data and calculating stand alone user position from stored data that was down converted and sampled intermediate frequency (IF) data. Each module of SDR platform is categorized by function for applicability for applying for other frequency and GPS signal easily. The developed software platform is tested using stored data which is down-converted and sampled IF data file. The test results present that the software platform calculates user position properly.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1383-1391
• /
• 2008

This paper presents an implementation of vector control for SPMSM using model based controller design in MATLAB/SIMULINK. The model based controller design enables fast development of control system for motor by designing controllers and performing simulation on the GUI (Graphic User Interface) platform, converting program code directly into real-time programs, and then performing tests for the responses from controllers. The controllers designed in this paper are PI speed controller and decoupling PI current controller. Also space vector modulation method using offset voltage is used in PWM scheme. And system stability is also secured by close magnitude overmodulation method, maintaining dynamics of load when overmodulation occurs. The validity of vector control implemented is verified through simulations and experiments.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.409-413
• /
• 2008

In this paper, we introduce a platform of advanced multiple antenna system based on orthogonal frequency-division multiplexing (OFDM). The advanced multiple antennas have beamforming gain using array antenna. In array antenna systems, received signal has phase delay caused distance of each antennas, therefore it should compensate with optimum weight vector which calculated by Lagrange algorithm. To implement the presented above procedures using Digital Signal Processor (DSP), we should fixed-point design. The performance of implemented platform is verified through MATLAB$^{(R)}$ simulations with various signal environments.

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.311-318
• /
• 2009

This paper shows the research about the development of software receiving platform processing GPS/Galileo L1/E1/E5a signal. Various researches for new GNSS signal character are possible using software receiving platform by facile program code modification. In addition, the program that processes GPS and Galileo signal integration is expected to help developing integration of receiver algorithm that deal with new various GNSS signal. In this paper, it is introduced the structure of GPS/Galileo receiving platform using sampled IF data as a program input. The function of the software platform embodied using MATLAB tool is tested by live data from Galileo test satellites. The software platform is modulated according to their roll and function. Each module is able to use selective function on GNSS signal.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.145-147
• /
• 2007

This paper presents an implementation of vector control for SMPMSM using model based controller design in MATLAB/SIMULINK. The model based controller design enables fast development of control system for motor by designing controllers and performing simulation on the GUI (Graphic User Interface) platform, converting program code directly into real-time programs, and then performing tests for the responses from controllers. The controller is designed as PI controller for speed and decoupling PI controller for current. And PWM used space vector modulation method using offset voltage and system stability is also secured by close magnitude overmodulation method, maintaining dynamics of load when it overmodulation. The validity of vector control implemented is verified through simulations and experiments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.61-68
• /
• 2017

In this paper, the coarse acquisition code (C/A code), for civil navigation, of the ranging codes for Global Positioning System (GPS) is studied, simulated and analyzed by using Matlab. We can see with the simulation results that the correctness of the method and feasibility, which is at simulation platform to further study on the real environment of GPS signal, can be confirmed. With using this results, we think, the complexity of tracking the satellite signal environment can be captured, and the performance of satellite receiver will be improved.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.2
• /
• pp.205-212
• /
• 2016

In this paper, we implement the development platform of multichannel digital hearing aid algorithm using Simulink provided by Matlab. The digital hearing aids are considered medical devices designed to compensate for hearing loss, they need to be correctly selected, to help a person who has difficulty in hearing. The development platform that implemented in this paper, includes WOLA filterbank for analysis/synthesis of input signal, Wide dynamic range compression for hearing loss compensation and adaptive filter for feedback cancellation. Using the development platform, algorithm parameters for each block can be set depending on the hearing aid user. Thus it is possible to test the algorithm before the machine language. As a result, the time for algorithm development can be saved and performance and computational complexity can be optimized.