• Research in Plant Disease
• /
• v.26 no.1
• /
• pp.48-52
• /
• 2020

In July 2019, typical rot symptom was observed on peach fruits harvested from the fields at Andong, Korea. As the disease progressed, white and purple colored mycelial mat developed on the surface of the infected fruits. A causal pathogen was isolated from the infected fruit and cultured on potato dextrose agar media for identification. Fungal colonies on potato dextrose agar produced 3 pigments, including purple, yellow, and white colors. The isolate incited fruit rot symptoms on artificially inoculated peach fruits, from which the same fungus was isolated, fulfilling Koch's postulates. Based on the morphological characteristics and sequence analysis of rDNA internal transcribed spacer, translation elongation factor 1-alpha, and β-tubulin, the causal agent of the disease was identified as Fusarium avenaceum. This study is the first report of fruit rot of peach fruits caused by Fusarium avenaceum in Korea.

• Journal of the Korean Ceramic Society
• /
• v.44 no.4 s.299
• /
• pp.194-197
• /
• 2007

Polyacrylonitrile (PAN)/$Fe_2O_3$ nanocomposite membranes with a thickness of 0.02 mm were electrospun by adding 0 to 5 wt% of $Fe_2O_3$ into PAN. The surface tension, density, kinematic viscosity and dynamic viscosity of the PAN solution were determined to be $33.8{\pm}1mN/m$, 0.9794 g/ml, $1548.6mm^2/sec$ and 1516.7 cP, respectively. The average diameters of PAN fibers containing 0, 1 2, 3, and 4 wt% $Fe_2O_3$ particles were 300, 260, 210, 130, and 90 nm, respectively. Fourier-transform infrared spectroscopy results showed that the addition of $Fe_2O_3$ nanoparticles to the PAN mat reduced the absorption peak intensity at $2242cm^{-1}$ ($C{\equiv}N$ bond) while it caused a sharp increase in the peak intensity at $2356cm^{-1}$(C=O bond). Thus, it appears that an appropriate amount of $Fe_2O_3$ nanoparticles in the PAN backbone leads to an improvement of the performance of the $CO_2$ gas sensor, most likely due to the change of functional groups in the membrane.

• Journal of the Korean Home Economics Association
• /
• v.45 no.7
• /
• pp.1-15
• /
• 2007

The purpose of this study is getting information for making a plan of immigrant workers in Korea. As a first step to suggest plans for immigrant workers who have multi-cultural background, this study investigated to the domestic living of Koreans(ChoSun-Tribe) of Gillim province in China. For this, usage of domestic space questionnaire were used. Results of the research were as follows. 1. The most popular LDK type was the one which kitchen was separated from living room and dining room. Most of them thought that kitchen and living room have to be separated. 2. There was no plan for laundry room specially and most houses have a washing machine in the bathroom. Most houses didn't install a bathtub in the bathroom and they didn't think that it was indispensable. 3. It was estimated that they used a living room as a multi-purpose room for the family but used a master bedroom for its own purpose. 4. They used a table and chair for meals normally but they took meals sitting on the floor with a large family or guest. 5.All of them took off the shoes inside of the house for hygienic reason. There was no plan for the space to take on-off shoes in most houses and they just put the mat on the floor for it. 6. Modified Ondol system which use water pipe under the floor was popular in apartment while most detached houses had traditional Ondol system. The satisfaction about Ondol system was very high compared to other ones and also Ondol system was the most desirable one for ChoSun-Tribe.

• Fire Science and Engineering
• /
• v.31 no.1
• /
• pp.89-97
• /
• 2017

This study analyzed the case of diesel car fires that occurred while driving in a tunnel 5 days after maintenance at a car service center. The results of the investigation and analysis found that a large amount of white foreign matter adhered to the inside of the exhaust port and the insulating plate above the DPF (diesel particulate filter) installed in the middle of the exhaust pipe was melted and lost. In particular, the metal floor of the car above the DPF was molten and pierced, and the rubber mat placed on the metal floor was burnt. Moreover, while the exhaust pipe in front of the DPF showed no overheating mark, such a mark was observed in the exhaust pipe from the DPF to the exhaust port. Because these findings may appear only when the DPF is overheated and ignited, this car fire is believed to have been caused by internal overheating of the DPF. The car fire investigation of this study suggests that if white foreign matter is found in the inside of the exhaust port during a fire cause investigation of a diesel car, the cause of the fire should be determined by removing the DPF and examining the internal damage of the DPF.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.402-409
• /
• 2019

Patients with dementia or elderly patients who can not move at all by themselves are at a high risk of falls and bedsore due to lack of caregivers. In this paper, to solve this problem, we propose an algorithm to determine the patient's lying postures by discriminating the main body parts such as head, shoulders, and hips based on the pressure intensity sensed at regular intervals. A smart mat with a lattice structure in which a pressure sensor is arranged so that the body part can be discriminated irrespective of the physical characteristics has been implemented. It consists of two modules of $7{\times}7$ array size. Each module consists of 49 FSR-406 sensors and independently senses pressure. For each module, the body part corresponding to the upper body or the lower body is sequentially discriminated by using a pressure distribution such as a cumulative pressure sum using a filter. The proposed algorithm can identify five lying positions by examining the inclusion relationship between body parts belonging to layer-1 such as head, shoulder, and hip area.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.85-89
• /
• 2000

There has recently been some trials to add the fluoride-releasing property to existing fissure sealants and some of them are already commercially available. But, some questions mat naturally be arisen regarding the potential decrease of physical properties by adding the fluoride despite its new caries-inhibiting abilities. This study was performed for the purpose of comparing the shear bond strengths of conventional composite sealant, Fluoride-releasing sealant and glass ionomer sealant, and obtained the results as fellows. 1. Two kinds of composite sealants (Helioseal and Teethmate-A) showed slightly higher bond strength than Fluoride-releasing sealant(Teethmate-F) without any significance(p>0.05). 2. Class ionomer sealant (Fuji III) was much lower than composite sealant in shear bond strength(p<0.05). 3. With the result of this study, it was found that there is little effect on retentive properties of sealants by adding fluoride to amplify the caries-inhibiting properties.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.99-104
• /
• 1987

Fiber mats were made at various density levels, using fibers from papermill sludge, ricestraw and various mixtures of the two. The paper mill sludges were collected from Moorim Papermill Co, and Jeonjoo Papermill Co. They were soaked in the liquid sulfur compounds, sulfur-tall oil and sulfurpolyester compounds, and made into fiber-reinforced, sulfur-based composition board. Under optimum conditions of fiber mat preparation and saturation with molten sulfur and modified sulfur, the Young's moduls of the manufactured tiber-reinforced composition board are superior to those of conventional wood-based composition boards. For example, the moduli of elasticity of the composition board made from papermill sludge, with a density of 0.40gm/$cm^3$, were greater than 1,400,000psi as compared 800,000psi for high density hardboard(1.28gm/$cm^3$). The modulus of rupture of the best reinforced composition board manufactured was over 9000psi, comparable to 6000psi of high density hardboard. The proposed Bryant and Lee's theory, "Modified Rule of Mixtures" can be applicable to the nonoriented and short fibrous composition board, when it was modified from "Rule of Mixtures" established by Paul an Jones, and supplemented by Smith and Cox's theory, In the Bryant and Lee's theory of $E_c=\frac{1}{3}aE_fV_f+bE_mV_m$, the constants "a" and "b" for the composition boards made from papermill sludge and the mixtures of ricestraw and the sludge were identified to be in the ranges of 3.29~3.54 and -2.47~-2.80 respectively.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2011

The problems like a deterioration of loading bearing capacity, an exaggeration of settlement and lateral deformation are able to be generated, meanwhile structures are built in soft ground. Top-Base method is belonged to a rigidity mat foundation method which is used to surface treatment of soft ground. This method makes an effect to increase the bearing capacity of foundation using friction force, and prevent the differential settlement. Further more, the In-Situ Top-Base method has advantages in the phase of economic effect by reduction of the construction cost and offers an expediency on construction comparing with precast products. This paper presents the way of the estimation of bearing capacity for In-Situ Top-Base method through field plate load test in soft ground. It utilizes the results to a future design by analyzing the properties in the existing study and designs through these analysis and calculating the top-base method's reasonable range.

• Journal of Korean Society on Water Environment
• /
• v.29 no.3
• /
• pp.420-427
• /
• 2013

In this study, the ecological characteristics of Limnoperna fortunei were surveyed as a preceding research to solve the problem such as biofouling or biowaste caused by those organisms in the closed water pipeline. Limnoperna fortunei was collected not in the main reaches of Somjin River but inside and outside of the intake tower which is located in the lower part of Sueo Reservoir. The dense populations were found at the inlet mouth and near part of the pipeline. Their byssuses were formed as a thick and tightly interwind mat. The rusted parts of the pipeline hold relatively more shells than those of the normal parts. Average count of the numbers ranged $12.1{\sim}136.5ind./m^2$ through the sampling stations (A,B and C). The amount of attached shells at each station were A=386, B=258, and C=71, respectively. The relationships of shell height-length and shell length-width were proportional. The majority sizes in each station ranged A=20.01~22.00 mm (33.9%), B=10.01~14.00 mm (51.2%), and C=18.01~20.00 mm (22.5%), 24.01~26.00 mm (21.1%), respectively. Most of the bigger size of shells on C station was found dead. The ecological habitat seemed less suitable for Limnoperna fortunei when they located farther away from the intake tower of reservoir. From now on, it is necessary to consider the continuous monitoring of this organism.

• Journal of Distribution Science
• /
• v.20 no.12
• /
• pp.1-12
• /
• 2022

Purpose: Nutrition has a direct and substantial effect on the agenda of the Sustainable Development Goals (SDGs). Recognizing the importance of adequate diet in strengthening school children's health, the relevant parties should take the initiative to introduce effective nutrition intervention programs. Malnutrition, in all conditions, hinders children's potential to survive and thrive. It has been challenging to demonstrate that enhancing nutrition and sustainability instruction in schools leads to healthier and more sustainable eating patterns. This scoping review is to discover the important drivers and emerging themes in nutritional health intervention distributions at schools toward the attainment of SDGs for school children's health. Data and methodology: A scoping review of the literature was conducted between 2007 and 2022 using the Web of Science (WoS) and Scopus databases. A total of 25 journal articles were identified for a full review. Results: Five themes were found from the literature relevant to the scenario surrounding pupils and food intake in schools. The data implied that nutrition intervention distributions, including food literacy, food consumption, good governance, and food entrepreneurship, might have a prominent impact on the behavioral and health outcomes of school children. Conclusions: Findings have emerged on the usefulness of nutrition intervention distributions at school in encouraging healthy diet intake among school children and consequently meeting the Sustainable Development Goals.