• 한국컴퓨터정보학회논문지
• /
• 제28권5호
• /
• pp.163-170
• /
• 2023

제4차 산업혁명의 가속화에 따라 해운산업에서는 자율운항선박(MASS)의 기술 개발 및 발전이 이루어지고 있으며, 이에 따른 국제 규정의 개발 역시 가속화되고 있다. 특히 IMO 해사안전위원회(MSC) 105차 회의에서는 회원 당사국 간 비강제적 자율운항선박 규정(MASS Code) 개발을 위한 로드맵을 수립하고 본격적으로 규정 개발에 착수하였다. 다수의 국가가 MASS Code 개발 작업에 적극적으로 참여하고 있으며, MASS Code에서 MASS 기능에 대한 상세한 요구사항에 대한 규정 개발 작업이 진행중이다. 특히, 자율운항선박의 자율도와 관련하여 "운항 모드(Mode of Operation)" 개념이 처음으로 언급되었으며, 2023년 4월에 개최될 IMO 자율운항선박 공동작업반(MASS JWG) 회의부터 이 운항 모드에 대한 논의가 진행될 것으로 예상된다. "운항 모드" 개념은 MASS 및 MASS 기능에 대한 설명과 더불어, MASS Code 개발을 위해 지속되어 논의될 것이다. 이 논문은 운항 모드 설정에 대한 기초연구를 수행하기 위해 운항 모드에 대한 지침을 제공하는 IMCA M 220 문서의 내용을 검토한다.

• 한국멀티미디어학회논문지
• /
• 제13권5호
• /
• pp.702-709
• /
• 2010

Mass형 종양 분할의 성능은 mass의 초기 위치에 큰 영향을 받는다. 따라서 몇몇의 논문들은 방사선 전문의로부터 획득한 mass의 초기 위치를 이용하여 종양의 분할을 진행하였다. 그러나, 본 논문은 mass 검출을 위한 부가정보 없이 디지털 마모그램만을 이용한 컴퓨터 지원 진단 시스템을 구성하여 방사선 전문의에게 mass로 추정되는 곳의 위치를 제시함을 목표로 한다. 제안된 시스템은 영역 확장 기법과 열림 연산을 통한 유방 영역 분할, 분할된 유방영역에서 mass 특성을 갖는 위치의 시드 설정, 설정된 시드 기반 레벨 셋을 통한 mass 영역 분할로 구성된다. Mass 분할을 위한 시드 설정은 부표본화된 유방영상에 대해 블록기반 분산 정보와 마스킹 정보를 이용하는 Mass Scoring Measure(MSM) system을 통하여 수행되었다. 테스트에 사용된 이미지는 DDSM 데이터베이스를 사용하였으며, 실험 결과 종양검출의 정확도는 4 FP/image에서 78%의 민감도를 나타내었고, 상하방향(CC)과 내외사방향(MLO) 이미지를 동시 고려시 92%의 민감도를 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.882-887
• /
• 2001

This paper deals with the effect of mass-spring-mass resonance that is a characteristics of the multi-layered panels in order to enhance sound insulation performance. From theoretical and experimental investigation, it is evident that tuning mass-spring-mass resonance by controlling elastic modulus of the core materials is very important to improve the STC value without increasing the weight of panels, resulting in enhancing STC value more than 10 dB.

• Journal of Astronomy and Space Sciences
• /
• 제29권1호
• /
• pp.47-49
• /
• 2012

Massive binary stars lose mass by two mechanisms: jet-driven mass loss during periods of active mass transfer and by wind-driven mass loss. Beta Lyrae is an eclipsing, semi-detached binary whose state of active mass transfer provides a unique opportunity to study how the evolution of binary systems is affected by jet-driven mass loss. Roche lobe overflow from the primary star feeds the thick accretion disk which almost completely obscures the mass-gaining star. A hot spot predicted to be on the edge of the accretion disk may be the source of beta Lyrae's bipolar outflows. I present results from spectropolarimetric data taken with the University of Wisconsin's Half-Wave Spectropolarimeter and the Flower and Cook Observatory's photoelastic modulating polarimeter instrument which have implications for our current understanding of the system's disk geometry. Using broadband polarimetric analysis, I derive new information about the structure of the disk and the presence and location of a hot spot. These results place constraints on the geometrical distribution of material in beta Lyrae and can help quantify the amount of mass lost from massive interacting binary systems during phases of mass transfer and jet-driven mass loss.

• 한국소음진동공학회논문집
• /
• 제26권1호
• /
• pp.27-38
• /
• 2016

The purpose of this study is to investigate the influence of moving mass on the vibration characteristics and the dynamic response of the simply supported beam. The three types of the moving mass(moving load, unsprung mass, and sprung mass) are applied to the vehicle-bridge interaction analysis. The numerical analyses are then conducted to evaluate the effect of the mass, spring and damper properties of the moving mass on natural frequencies and dynamic responses of the simply supported beam. Particularly, in the case of the sprung mass, variations of the natural frequency of simply supported beam are explored depending on the position of the moving mass and the frequency ratio of the moving mass and the beam. Finally the parametric studies on the resonance phenomena are performed with changing mass, spring and damper parameters through the dynamic interaction analyses.

• Structural Engineering and Mechanics
• /
• 제28권6호
• /
• pp.659-676
• /
• 2008

The reports regarding the free vibration analysis of uniform beams carrying single or multiple spring-mass systems are plenty, however, among which, those with inertia effect of the helical spring(s) considered are limited. In this paper, by taking the mass of the helical spring into consideration, the stiffness and mass matrices of a spring-mass system and an equivalent mass that may be used to replace the effect of a spring-mass system are derived. By means of the last element stiffness and mass matrices, the natural frequencies and mode shapes for a uniform cantilever beam carrying any number of springmass systems (or loaded beam) are determined using the conventional finite element method (FEM). Similarly, by means of the last equivalent mass, the natural frequencies and mode shapes of the same loaded beam are also determined using the presented equivalent mass method (EMM), where the cantilever beam elastically mounted by a number of lumped masses is replaced by the same beam rigidly attached by the same number of equivalent masses. Good agreement between the numerical results of FEM and those of EMM and/or those of the existing literature confirms the reliability of the presented approaches.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.162-163
• /
• 2023

As the development of the 4^th industiral revolution in the maritime industry has progressed, the technical development of autonomous ships, and the development of international regulations have been accelerated. In particular, the IMO Maritime Safety Committee(MSC) has established a road-map for the development of the non-mandatory goal-based MASS instrument(MASS Code) and started developing a non-mandatory MASS Code at MSC 105^th meeting. Many countries are actively participating in the Correspondence Group on the development of MASS Code, and the development of detailed requirements for MASS functions in the MASS Code is underway. Especially, the concept of "Mode of Operation" for MASS functions was mentioned in the Correspondence Group for the first time, and it is expected that discussions on these modes will be conducted from the IMO MASS JWG meeting to held in April 2023. The concept of "Mode of Operation" will be useful in explaining MASS and MASS functions and will be discussed in the future for the development of MASS Code. This paper reviews the contents of the IMCA M 220 document, which provides guidelines on operating modes, to conduct research on the benchmark for setting the operating modes of MASS.

• 대한기계학회논문집B
• /
• 제40권4호
• /
• pp.237-243
• /
• 2016

호기성 수처리 과정의 폭기에 소요되는 에너지의 이용효율을 높이기 위해서는 물질전달 특성뿐만 아니라 소요동력에 대한 연구가 필요하다. 본 논문은 수직 2 상 유동 및 물질전달 특성에 미치는 오리피스 노즐형상과 소요동력의 영향에 대한 실험적 연구를 목적으로 한다. 측정 변수들을 이용하여 유량비, 소요동력, 물질전달 계수 그리고 물질전달 효율을 산출하였다. 소요동력이 커지면 물질전달 계수는 증가하는 반면에 유량비와 물질전달 효율은 감소하였다. 무차원 면적비가 작은 오리피스 노즐의 유량비, 물질전달 계수 및 효율이 높게 나타났다. 물질전달 특성에 미치는 유량비, 소요동력 그리고 프라우드 수의 영향을 평가하기 위한 실험식을 제시하였다.

• Structural Engineering and Mechanics
• /
• 제21권6호
• /
• pp.713-735
• /
• 2005

Due to the complexity of mathematical expressions, the literature concerning the free vibration analysis of plates carrying multiple three-degree-of-freedom (dof) spring-mass systems is rare. In this paper, the three degrees of freedom (dof's) for a spring-mass system refer to the translational motion of its lumped mass in the vertical ($\bar{z}$) direction and the two pitching motions of its lumped mass about the two horizontal ($\bar{x}$ and $\bar{y}$) axes. The basic concept of this paper is to replace each three-dof spring-mass system by a set of equivalent springs, so that the free vibration characteristics of a rectangular plate carrying any number of three-dof spring-mass systems can be obtained from those of the same plate supported by the same number of sets of equivalent springs. Since the three dof's of the lumped mass for each three-dof spring-mass system are eliminated to yield a set of equivalent springs, the total dof of the entire vibrating system is not affected by the total number of the spring-mass systems attached to the rectangular plate. However, this is not true in the conventional finite element method (FEM), where the total dof of the entire vibrating system increases three if one more three-dof spring-mass system is attached to the rectangular plate. Hence, the computer storage memory required by using the presented equivalent spring method (ESM) is less than that required by the conventional FEM, and the more the total number of the three-dof spring-mass systems attached to the plate, the more the advantage of the ESM. In addition, since manufacturing a spring with the specified stiffness is much easier than making a three-dof spring-mass system with the specified spring constants and mass magnitude, the presented theory of replacing a three-dof spring-mass system by a set of equivalent springs will be also significant from this viewpoint.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2624-2633
• /
• 1993

Mass transfer experiment by naphthalene sublimation method has great advantages in measurement of local transfer coefficients in the region of a three dimensional flow or for a model of complex geometry, which is considered to be very difficult with conventional heat transfer measurements. Mass transfer data obtained by naphthalene sublimation technique are converted to the heat transfer data through heat/mass transfer analogy. This analogy is valid for a simple or laminar flow, but new insight is needed when applying to a turbulent flow or complex flow such as separation, reattachment and recirculation, The purpose of this research is to investigate how geometries and flow conditions incorporate heat/mass transfer analogy. Mass transfer experiments are performed using naphthalene sublimation technique for a flat plate, a circular cylinder, and rectangular cylinders. And mass transfer data are compared with earlier heat transfer measurements for the same geometries. Usefulness of analogy relation between heat and mass transfer is examined with these results.