Browse > Article
http://dx.doi.org/10.12989/sem.2005.21.6.713

Use of equivalent spring method for free vibration analyses of a rectangular plate carrying multiple three-degree-of-freedom spring-mass systems  

Wu, Jia-Jang (Department of Marine Engineering, National Kaohsiung Marine University)
Publication Information
Structural Engineering and Mechanics / v.21, no.6, 2005 , pp. 713-735 More about this Journal
Abstract
Due to the complexity of mathematical expressions, the literature concerning the free vibration analysis of plates carrying multiple three-degree-of-freedom (dof) spring-mass systems is rare. In this paper, the three degrees of freedom (dof's) for a spring-mass system refer to the translational motion of its lumped mass in the vertical ($\bar{z}$) direction and the two pitching motions of its lumped mass about the two horizontal ($\bar{x}$ and $\bar{y}$) axes. The basic concept of this paper is to replace each three-dof spring-mass system by a set of equivalent springs, so that the free vibration characteristics of a rectangular plate carrying any number of three-dof spring-mass systems can be obtained from those of the same plate supported by the same number of sets of equivalent springs. Since the three dof's of the lumped mass for each three-dof spring-mass system are eliminated to yield a set of equivalent springs, the total dof of the entire vibrating system is not affected by the total number of the spring-mass systems attached to the rectangular plate. However, this is not true in the conventional finite element method (FEM), where the total dof of the entire vibrating system increases three if one more three-dof spring-mass system is attached to the rectangular plate. Hence, the computer storage memory required by using the presented equivalent spring method (ESM) is less than that required by the conventional FEM, and the more the total number of the three-dof spring-mass systems attached to the plate, the more the advantage of the ESM. In addition, since manufacturing a spring with the specified stiffness is much easier than making a three-dof spring-mass system with the specified spring constants and mass magnitude, the presented theory of replacing a three-dof spring-mass system by a set of equivalent springs will be also significant from this viewpoint.
Keywords
equivalent spring method; finite element method; rectangular plate; three-dof spring-mass system; free vibration;
Citations & Related Records

Times Cited By Web Of Science : 2  (Related Records In Web of Science)
Times Cited By SCOPUS : 2
연도 인용수 순위
1 Avalos, D.R., Larrondo, H.A. and Laura, P.A.A. (1993), 'Vibrations of a simply supported plate carrying an elastically mounted concentrated mass', Ocean Engineering, 20, 195-205   DOI   ScienceOn
2 Avalos, D.R., Larrondo, H.A. and Laura, P.A.A. (1994), 'Transverse vibrations of a circular plate carrying an elastically mounted concentrated mass', J. Sound Vib., 177, 251-258   DOI   ScienceOn
3 Bathe, K.J. (1982), Finite Element Procedures in Engineering Analysis, Prentice-Hall, Inc.
4 Chang, T.P. and Chang, C.Y. (1998), 'Vibration analysis of beams with a two degree-of-freedom spring-mass system', J. Solids Struct., 35(5-6), 383-401   DOI   ScienceOn
5 Clough, R.W. (1993), Dynamics of Structures, McGraw-Hill, Inc.
6 Cullum, J.K. and Willoughby, R.A. (2002), 'Lanczos algorithms for large symmetric eigenvalue computations', Society for Industrial & Applied Mathematics
7 Gerald, C.F. and Wheatley, P.O. (1998), Applied Numerical Analysis, Addison Wesley Publishing Company
8 Jen, M.U. and Magrab, E.B. (1993), 'Natural frequencies and mode shapes of beams carrying a two-degree-of- freedom spring-mass system', J. Vibration and Acoustics, 115, 202-209   DOI   ScienceOn
9 Kopmaz, O. and Telli, S. (2002), 'Free vibrations of a rectangular plate carrying a distributed mass', J. Sound Vib., 251, 39-57   DOI   ScienceOn
10 Larrondo, H.L., Avalos, D.R. and Laura, P.A.A. (1992), 'Natural frequencies of Bernoulli beam carrying an elastically mounted concentrated mass', Ocean Engineering, 19, 461-468   DOI   ScienceOn
11 Rossi, R.E. and Laura, RA.A. (1996), 'Symmetric and antisymmetric normal modes of a cantilever rectangular plate: Effect of Poisson's ratio and a concentrated mass', J. Sound Vib., 195, 142-148   DOI   ScienceOn
12 Rossit, C.A. and Laura, P.A.A. (2001), 'Free vibrations of a cantilever beam with a spring-mass system attached to the free end', Ocean Engineering, 28, 933-939   DOI   ScienceOn
13 Rossi, R.E., Laura, P.A.A., Avalos, D.R. and Larrondo, H.O. (1993), 'Free vibrations of Timoshenko beams carrying elastically mounted, concentrated mass', J. Sound Vib., 165, 209-223   DOI   ScienceOn
14 Wu, JJ. (2002), 'Alternative approach for the free vibration of beams carrying a number of two-degree of freedom spring-mass systems', J. Struct. Eng., 128(12), 1604-1616   DOI   ScienceOn
15 Wu, J.S. and Luo, S.S. (1997b), 'Use of the analytical-and-numerical-combined method in the free vibration analysis of a rectangular plate with any number of point masses and translational springs', J. Sound Vib., 200, 179-194   DOI   ScienceOn
16 Wu, J.J. and Whittaker, A.R. (1999), 'The natural frequencies and mode shapes of a uniform cantilever beam with multiple two-dof spring-mass systems', J. Sound Vib., 227(2), 361-381   DOI   ScienceOn
17 Wu, J.S. and Chou, H.M. (1998), 'Free vibration analysis of a cantilever beam carrying any number of elastically mounted pointed masses with the analytical-and-numerical-combined method', J. Sound Vib., 213, 317-332   DOI   ScienceOn
18 Wu, J.S. and Luo, S.S. (1997a), 'Free vibration analysis of a rectangular plate carrying any number of point masses and translational springs by using the modified and quasi-analytical and numerical combined methods', Int. J. Numer. Meth. Eng., 40, 2171-2193   DOI
19 Wu, J.J. (2005), 'Free vibration characteristics of a rectangular plate carrying multiple three-degree-of-freedom spring-mass systems using equivalent mass method', Int. J. Solids Stnct. (In Press)
20 Ingber, M.S., Pate, A.L. and Salazar, J.M. (1992), 'Vibration of a clamped plate with concentrated mass and spring attachments', J. Sound Vib., 153, 143-166   DOI   ScienceOn
21 Wu, J.S. and Chen, D.W (2001), 'Free vibration analysis of a Timoshenko beam carrying multiple spring-mass systems by using the numerical assembly technique', J. Numer. Meth. Eng., 50, 1039-1058   DOI
22 Gurgoze, M. (1996), 'On the eigen-frequencies of a cantilever beam with attached tip mass and a spring-mass system', J. Sound Vib., 190, 149-162   DOI   ScienceOn