• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.693-699
• /
• 2011

The outermost SG tubes have more structural problems than inside tubes. Many studies have used a uniform added mass coefficient for all of the SG tubes during the FIV analysis. The purpose of this study is to find out the added mass coefficients for each tube in a cylindrical shell. When a number of tubes are increased, added mass coefficients are also increased. And added mass coefficients at outermost tubes are less than those of inside tubes. According to gap changes between outermost tube and cylindrical shell, added mass coefficients are decreased with increasing the gap. When the gap has very large value, it shows that the added mass coefficient is asymptotically converged to the value of the tube array in a free fluid field.

• Journal of Welding and Joining
• /
• 제19권4호
• /
• pp.406-412
• /
• 2001

This study is focussed on the numerical prediction of the thermal fatigue life of a ${\mu}BGA$(Micro Ball Grid Array) solder joint. Numerical method is used to perform three-dimensional finite element analysis for Sn-37mass%Pb. Sn-3.5mass%Ag solder alloys during the given thermal cycling. Strain values, along with the result of mechanical fatigue tests for solder alloys were then used to predict the solder joint fatigue life using the Coffin-Manson equation. In this study, a practical correlation for the prediction of the thermal fatigue life is suggested by using the dimensionless variable $\gamma$. As a result. it could be found that Sn-3.5mass%Ag has longer fatigue life than Sn-37mass%Pb in low cycle fatigue. In addition. the result with ${\gamm}ashow$a good agreement with the FEA results.

• Smart Structures and Systems
• /
• 제5권3호
• /
• pp.279-290
• /
• 2009

Two degrees of freedom resonant systems are employed to improve the resonant property of resonant sensor, as compared to a single degree of freedom resonant system. This paper presents design, development and testing of two degrees of freedom resonant sensor. To measure absolute mass, cantilever shaped two different masses (smaller/absorber mass and bigger/drive mass) with identical resonant frequency are mechanically linked to form 2 - Degree-of-Freedom (DOF) resonator which exhibits higher amplitude of displacement at the smaller mass. The same concept is extended for measuring differential quantity, by having two bigger mass and one smaller mass. The main features of this work are the 3 - DOF resonator for differential detection and the microcontroller based closed loop electronics for resonant sensor with piezoelectric sensing and excitation. The advantage of using microcontroller is that the method can be easily extended for any range of measurand.

• Nuclear Engineering and Technology
• /
• 제35권1호
• /
• pp.1-13
• /
• 2003

In this study, an effective method to estimate the fundamental frequencies of co-axial cylinders immersed in fluid is proposed. The proposed method makes use of the equivalent mass or density that is derived from the added mass matrix caused by the fluid-structure interaction (FSI) phenomenon. The equivalent mass is defined from the added mass matrix based on a 2-D potential flow theory. The theory on two co-axial cylinders extended to the case of three cylinders. To prove the validity of the proposed method, the eigenvalue analyses upon coaxial cylinders coupled with fluid gaps are peformed using the equivalent mass. The analyses results upon various fluid gap is conditions reveal that the present method could provide accurate frequencies and be suitable for expecting the fundamental frequencies of fluid coupled cylinders in beam mode vibration.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1089-1094
• /
• 2004

Numerical methods to estimate behaviors of jointed rock mass can be roughly divided into two method : discontinuous model and continuum model. Generally, distinct element method (DEM) is applied in discontinuous model, and finite element method (FEM) or finite difference method (FDM) is utilized in continuum model. To predict a behavior of discontinuous model by DEM, it is essential to understand characteristics of joints developed in rock mass through field tests. However, results of field tests can not provide full information about rock mass because field tests is conducted in limited area. In this paper, discontinuous analysis by UDEC and continuous analysis by FLAC is utilized to estimate a behavior of a tunnel in jointed rock mass. For including discontinuous analysis in continuous analysis, joints in rock mass is considered by reducing rock mass properties obtained by RMR and decreasing shear strength of rock mass. By comparing and revising two analysis results, analysis results similar with practical behavior of a tunnel can be induced and appropriate support system is decided.

• 천문학회지
• /
• 제32권1호
• /
• pp.17-39
• /
• 1999

We investigate dynamical evolution of globular clusters with multi-mass component under the Galactic tidal field. We compare the results with our previous work which considered the cases of single-mass component m the globular clusters. We find the followings: 1) The general evolutions are similar to the cases of single-mass component. 2) There is no evidence for dependence on the orbital phase of the cluster as in the case of single-mass component. 3) The escape rate in multi-mass models is larger than that in the single-mass models. 4) The mass-function depends on radius more sensitively in anisotropic models than in isotropic models.

• 천문학회지
• /
• 제14권2호
• /
• pp.89-93
• /
• 1981

Weibull analyses given to the initial mass function (IMF) deduced by Miller and Scalo (1979) have shown that the mass dependence of IMF is an exp$[-{\alpha}m]$- form in low mass range while in the high mass range it assumes an exp$[-{\alpha}\sqrt{m}]/\sqrt{m}$-form with the break-up being at about the solar mass. Various astrophysical reasonings are given for identifying the exp$[-{\alpha}m]$ and exp$[-{\alpha}\sqrt{m}]/\sqrt{m}$ with halo and disk star characteristics, respectively. The physical conditions during the halo formation were such that low mass stars were preferentially formed and those in the disk high mass stars favoured. The two component nature of IMF is in general accord with the dichotomies in various stellar properties.

• 천문학논총
• /
• 제30권2호
• /
• pp.385-387
• /
• 2015

Stellar mass is an important parameter of galaxies. We estimate the dynamical mass of an elliptical galaxy by its velocity dispersion and effective radius using the Hernquist model in the framework of MOdified Newtonian Dynamics (MOND). MOND is an alternative theory to the dark matter paradigm. In MOND the dynamical mass is the same as the baryonic mass or luminous mass, and in elliptical galaxies most of the baryons reside in stars. We select elliptical galaxies between redshift 0.05 and 0.5 from the main galaxy sample and the luminous red galaxy sample in the Sloan Digital Sky Survey. We find that the stellar mass-to-light ratio at different redshift epochs can be fitted by a gamma distribution, and its mean is smaller at smaller redshifts.

• Genomics & Informatics
• /
• 제4권2호
• /
• pp.65-70
• /
• 2006

Peptide mass mapping is the matching of experimentally generated peptides masses with the predicted masses of digested proteins contained in a database. To identify proteins by matching their constituent fragment masses to the theoretical peptide masses generated from a protein database, the peptide mass fingerprinting technique is used for the protein identification. Thus, it is important to know the theoretical mass distribution of the database. However, few researches have reported the peptide mass distribution of a database. We analyzed the peptide mass distribution of non-redundant protein sequence database in the NCBI after digestion with 15 different types of enzymes. In order to characterize the peptide mass distribution with different digestion enzymes, a power law distribution (Zipfs law) was applied to the distribution. After constructing simulated digestion of a protein database, rank-frequency plot of peptide fragments was applied to generalize a Zipfs law curve for all enzymes. As a result, our data appear to fit Zipfs law with statistically significant parameter values.

• 한국소음진동공학회논문집
• /
• 제14권7호
• /
• pp.561-568
• /
• 2004

The nonlinear dynamic characteristic of a straight tube conveying fluid with constraints and an attached mass on the tube is examined in this study An experimental apparatus with an elastomer tube conveying water which has an attached mass and constraints is made and comparisons are made between the theoretical results from the non-linear equation of motion of piping system and the experimental results. The comparisons show that the tube is destabilized as the magnitude of the attached mass increases, and stabilized as the position of the attached mass closes to the fixed end. In case of a small end-mass, the system shows complicated and different types of solutions. For a constant end-mass. the system undergoes a series of bifurcations after the first Hopf bifurcation, as the flow velocity increases. which causes chaotic motions of the tube eventually.