• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.375-386
• /
• 2008

Recently, development paradigm of information system is turning into object oriented and component based, and this methodology is leading the software industry. To acclimatize aptly to this trend, users demand the assessment of software expenses to change with the appropriate model of computing costs of the environment, and some people are actually studying the concept of Object Oriented Function Point and UCP method. Especially, Object Oriented Function Point Measurement Process has good points in overcoming the bound of LOC and the existing the Function Point Measurement Process because Object Oriented Function Point Measurement Process is applicable to the early stage of development project mainly with the used cases, and valid to the life long period as the each stage of software products develops, and always understandable to communicate with users by the UML mark rules. Accordingly, this research is to measure Functional Point at ROFP and AOFP in accordance with the development project of information system by the national defense CBD methodology procedures and UML Interrelation Analysis that are recently and widely used in the developmental environment of object oriented information system. Furthermore, this study suggests the measurement method to obtain Functional Point, and identifies service function and object/class function in the correlation analysis of use case and class based on the products and UML modeling via traditional FPA model and object oriented FPA model. Above all, this study is to demonstrate the improvement of traditional Function Point Measurement Process, IFPUG-CPM and software cost basis, and reveal Function Point Measurement Process, which is appropriate to the development of object oriented information system, and suggest the evaluation results of the compatibility through case studies.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.123-139
• /
• 2016

The excavated potteries of Goryeo Period from the Sandongri archaeological site in Seosan were studied on physicochemical analyses. Surface color of the samples are mainly grayish blue, and showed the natural glaze by melting the body soils during the burning. Partly, swelling surface are observed bloated marks because of blow out gas by burning. The potteries are some possibility of making the similar source clay on the basis of magnetic susceptibilities (about $1{\times}10^{-3}SI\;unit$) and general occurrences. Values of specific gravity, apparent porosity and absorption ratio are divided two groups as highly different cases of bloating surface samples. The source clay of the potteries used mainly microcrystalline clay, the mineral compositions are quartz and some colored minerals. Based on the analysis, the burning temperature of the potteries are assumed that they were around $1,100^{\circ}C$ because detection of quartz and mullite within hard and compact matrices. As geochemical variations of the samples, evolution trends of rare earth, compatible and incompatible elements showed very similar patterns excepting the some major elements, that means the potteries are interpreted to making by elutriation processes using the same raw clays from very similar basement rocks of genetically.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.396-404
• /
• 2018

The purpose of this study is to do the subjective research on how the designation of reasonable price restaurants has an influence on customers' visits to those places and to find out how much the government support policy affects the customers. For these, researchers chose and conducted Q methodology known as Q sort for the analysis of the subjective views of customers to visit the restaurants with a designated resonable price. The analysis work will be conducted in the way that the respondents sort the statement cards. In this process, P samples will be chosen among the statements written by Q target population. Q-sort produced among classified samples is going to be analyzed through Q factor analysis using PC QUANL program. The results can be summarized as follows. customers divide into 4 types. Firstly, type 1 (N=5) is the people who pursue the quantity on value for money. Secondly, type 2 customers (N=2) prefer foods with good taste on value for money. Thirdly, type 3 ones (N=2) put a great value on cleanliness. Finally, type 4 ones (N=1) pursue foods with certification mark. The result shows that each has the unique features, respectively. Each subjective opinion derived from the research looks forward to becoming the foundation for further and various study and being applied to restaurants support policy that the government leads to.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.3
• /
• pp.249-255
• /
• 2002

This paper describes on the extraction of ship's real-time movement information using a combination full-function ARPA radar and ECS system that displays radar images and an electronic chart together on a single PC screen. The radar target extractor(RTX) board, developed by Marine Electronics Corporation of Korea, receives radar video, trigger, antenna bearing pulse and heading pulse signals from a radar unit and processes these signals to extract target information. The target data extracted from each pulse repetition interval in DSPs of RTX that installed in 16 bit ISA slot of a IBM PC compatible computer is formatted into a series of radar target messages. These messages are then transmitted to the host PC and displayed on a single screen. The position data of target in range and azimuth direction are stored and used for determining the center of the distributed target by arithmetic averaging after the detection of the target end. In this system, the electronic chart or radar screens can be displayed separately or simulaneously and in radar mode all information of radar targets can be recorded and replayed In spite of a PC based radar system, all essential information required for safe and efficient navigation of ship can be provided.

• Asian Oncology Nursing
• /
• v.5 no.1
• /
• pp.11-21
• /
• 2005

The purpose of this study were to develop an web-based education program for Lung cancer patients and to test its effects on patients' self-care knowledge, compliance to medical regimen, nutrition status and pain. The program was developed by the following process: first, Lung cancer patients demand on the web-based program was investigated. and second, the program was developed with the help of various reference books and then validation of experts group. last, educations effects on the patients is evaluated and compared the differences in self-care knowledge, compliance to medical regimen, nutrition status and pain between on experimental group and a control group on before discharge 1day and 3weeks after. SPSS/Win 11.0 program was used for data analysis. It was proven with $x^2$ test and t-test, and Pearson Correlation coefficient, and Chronbach's alpha coefficient were done for the reliability of measuring instruments. 1. The summary of the Program development is as follows. The program is based on patients' questionnaire and reference material and is made for users friendly. Not only Bigger font size and bright colors but also illustrations or pictures were adopted to help enhance patients' understanding. 2. The summary of the study results is as follows. 1) Compared with control group, the web-based educated experimental group showed a statistical significant difference on self-care knowledge, Especially disease, radiation treatment, medication & analgesics, chemotherapy side effect, but there was no significant difference in the field of chemotherapy, in the fields of operation, diet & general knowledge. 2) Compared with control group, the web-based educated experimental group showed a statistical significant difference on compliance to medical regimen, especially in the field of follow up care, everyday life, diet, but there was no significant difference in the field of medication, exercise. 3) Compared with control group, web-based educated experimental group showed no significant difference in nutrition status, but partially significant difference in body weight. 4) Compared with control group, the web-based educated experimental group showed no significant difference in pain level. 5) The significantly positive correalation self-care knowledge with the compliance to medical regimen. 6) Users satisfaction with the web-based education program of the contents quality, the level of recommendation to others, content layout, medical information quality, but interesting got a low mark.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.648-655
• /
• 2020

The firing pin of modern automatic rifles detonates the primer of loaded ammunition via a hammer. During this process, the firing pin receives an impact load and repetitive force throughout the life of the rifle. An endurance test of a rifle showed that the firing pin breaks prematurely at 96.26% of life. Accordingly, a case study was conducted through cause analysis and a reconstruction test. Optical microscopy and scanning electron microscopy of the broken surface of the firing pin showed that a crack began in the circumferential direction of the surface, resulting in a fatigue crack to the core after repeated impact. Crack growth and fatigue destruction occurred at the end due to the repetitive impact and was estimated using a notch. For verification, a sample that produced a 0.03mm circumferential notch was broken at 64.25% of life in the reconstruction test. A test of breakage according to the notch types showed that a 0.3mm and a 0.5mm one-side notch were broken at 66.53% and 50.76%, respectively, and a 0.03mm six-point notch was broken at 85.65%. The endurance life of a sample firing pin with a rough surface and tool mark was examined, but an approximately 381 ㎛ internal crack formed. Through this study, failure for each notch type was considered. These results show that quality control of the notch and surface roughness is essential for ensuring the reliability of a component subjected to repeated impact.

• Korea journal of population studies
• /
• v.19 no.1
• /
• pp.73-92
• /
• 1996

There are basically three approaches of surveys on the economically active population, namely Labor Force Approach (or Current Status Approach), Usual Status Approach, and Gainful Worker Approach. The selection of an approach among these approaches to be applied to a survey or population census should take into considerations the purpose and background of the survey or the census and the socio-economic situation of a country. In the Korean Population and Housing Census series which have been taken almost every five years since its first round in 1925, a sample survey on the economically active population has been adopted since the 1960 round of census. Even if the labor force approach continued to be applied to the censns prior to 1980, the approach has been different from one round to another in recent rounds. It may be suggested that the labor force approach continue to be adopted for the Korean Population and Housing Census for the following reasons: 1) the proportion of seasonal workers to the total workers is very small, 2) the proportion of population whose type of activity for a specific duration is different from that for one year is small, 3) the approach for the census should be the same as that for a variety of sample surveys on the economically active population which adopt the labor force approach, since the census functions as a population as well as a bench mark for those sample surveys, 4) an application of labor force approach will facilitate international comparisons since most of countries that conduct a population census adopt this approach, 5) the labor force approach can improve the reliability of results, thanks to its short reference period, etc.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.181-187
• /
• 2020

In this paper, we proposed a register allocation algorithm and resource allocation algorithm in the high level synthesis process for the SoC design synthesis system of high performance vehicles We have analyzed to the operator characteristics and structure of datapath in the most important high-level synthesis. We also introduced the concept of virtual operator for the scheduling of multi-cycle operations. Thus, we demonstrated the complexity to implement a multi-cycle operation of the operator, regardless of the type of operation that can be applied for commonly use in the resources allocation algorithm. The algorithm assigns the functional operators so that the number of connecting signal lines which are repeatedly used between the operators would be minimum. This algorithm provides regional graphs with priority depending on connected structure when the registers are allocated. The registers with connecting structure are allocated to the maximum cluster which is generated by the minimum cluster partition algorithm. Also, it minimize the connecting structure by removing the duplicate inputs for the multiplexor in connecting structure and arranging the inputs for the multiplexor which is connected to the operators. In order to evaluate the scheduling performance of the described algorithm, we demonstrate the utility of the proposed algorithm by executing scheduling on the fifth digital wave filter, a standard bench mark model.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.2
• /
• pp.91-108
• /
• 1990

The purpose of this study was to compare the maganitude of the discrepancies of the mounting errors in according to the states of dentitions, and to the superoinferior, anteroposterior, and rightleft driecetions. GROUP I. : Fourteen patients 22 to 26 years of age with a full complement of teeth, were used in the study. The criteria fro patient selection were a complete dentition, sparse restorarive treatment, and adequate posterior and anterior occlusan stops. And they had no sign and sympton at TMG area. GROUPII. : Eigth patients 37 to 62 years of age with bilateral free ends. The criteria for patient selection were Kennedy classification class 1 cases, and adequate posterior and anterior stops. And the opposite dentitions were a full complement of teeth. Irreversible hydrocolloid impresiion of each arch was taken of each patient. These were immediatel poured in stone and mounted on a Denar Mark II. Articulator with the arbitrary slidematic face-bow. With hand articulation th e mandibular cast was mounted to the maxillary cast in centric occlusion. Five types of interocclusal records were taken of each patient : (1) aluwax (2) baseplate wax; (3) znic oxide-eugenol pasts; (4) polyether (Ramitec); (5) modeling compound. All measurement of the five selected recording materials were compared with those of the hand-articulated full arch models in centric occlusion or maximum interdigitation. The results were as follows; 1. There were statistical differences in amount of devitation in according to the materials and the states of dentition. The amount of deviation of compound was the largest. 2. There were statistical differences in amount of deviation in complete dentition at all directions. The amount of diviation of compound was the largest. And at the right-left direction the amount of znic oxide-eugenol paste was larger than that of baseplate wax. 3. There was a statistical difference in amount of diviations in partial edentulous dentition at the superoinferior direction. The amount of deviation of compound was larger than that of znic oxide-eugenol paste. 4. There was as statistical difference in amount of deviations in partial edentulous dentition at the right-left direction. The amount of deviation of baseplate wax was larger that tnat of polyether. 5. There was not a statistical difference in amount of diviation in partial edentulous dentition at the anteroposterior direction.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.61-76
• /
• 2009

The purpose of this study are to investigate the reasonable maintenance expense of golf course according to the size and management system of each golf course. The maintenance cost per hole per golfer of 29 golf courses and the maintenance cost for items and locations of 8 golf courses were analyzed. 1. As golfers per hole increased, maintenance cost per hole per golfer decreased. 2. The decisive cost factors for maintenance cost of golf course are the number of annual golfers, the total course size, the management system, and automation of course facilities. 3. Maintenance cost of golf courses contained the landscaping areas except for building and parking lots is $869^{\}/_{m^2}$ Korean won. 4. Average maintenance cost of 8 golf courses is $44,325,000^{\}/_{hole}$. 5. Labor cost marked the largest portion in the total cost. Among the items of labor cost, repair cost for green ball mark was the highest with the ratio of 26%(\4,163,000). 6. Material cost for Fairways which reaches 30% of the total area was composed of $22%{\sim}44%$ of the total cost of materials. Cost of imported fertilizers, pestcides for insects and diseases, and sands for top dressing was the highest. 7. Material cost for Green which reaches 2% of the total area was composed of $28%{\sim}36%$ of the total cost. Cost of imported products such as particle-shaped fertilizers, micro mineral fertilizers, and soil conditioners was the highest. 8. There is no difference in cost between chemical fertilizers and the environmentally friendly fertilizers even if environmentally friendly fertilizers using microorganism or chitosan materials are also expensive.