• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.609-611
• /
• 1995

In this study, we experimented the properties of SOG film as sacrificials layers in surface micromachining and made $SiO_2$ films through spin, bake, cure process. When we culled SOG films once, SOG film thickness is 1000 $\sim$ 3000 ${\AA}$. Then we coaled 200-${\AA}$ SOG film on 9000 ${\AA}$-CVD oxide and then we fabricated test structure, cantilever and ring/beam structure. We estimated deformed structure by SEM. As the results, The deformation of the structure layer in the SOG-coated sacrificial layers is small compared with that or the structure layer on CVD oxide or PSG. In the future, we use multi coated SOG films, SOG film become adequate material as sacrificial layer.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1525-1527
• /
• 2008

기존 케이블 puller 방식의 EPB 시스템은 제동력을 측정하기 위하여 hall effect force 센서를 이용하고 있다. 그러나 본 논문에서는 hall effect force 센서를 사용하는 대신 모터의 속도를 이용하여 제동력이 가해지는 시점을 결정한 이후 모터의 회전수에 따른 제동력 추정 기법을 제안하고 실험을 통하여 검증한다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1528-1530
• /
• 2008

기존의 EPB 시스템에서는 제동력을 측정하기 위하여 hall effect force 센서를 이용하고 있지만, 이 센서는 비싼 가격과, 구조상 장착의 어려움 등의 문제점을 가지고 있다. 본 논문에서는 hall effect force 센서에 비해 저가이며, 기구적인 면에서 단순한 구조를 가지는 전류 센서만을 이용하여, 모터 유도 전류와 각가속도 정보를 획득하고, 이것을 이용하여 EPB 제동력을 추정하는 기법을 제안하고 실험을 통해 검증한다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.341-342
• /
• 2010

최근 들어 친환경 자동차 분야는 바야흐로 전기자동차 시대를 맞이하게 되었다. 이러한 전기자동차는 전지(battery)로부터 전력을 공급받아 전동기로 차량을 구동하는 구조로 되어 있어 전지를 충전하기 위한 충전기가 필수적이다. 이러한 충전기는 탑재형 충전기(on board charger)와 별치형 충전기(off board charger)로 분류된다. 보통 별치형 충전기는 급속충전용으로 3상 교류전원을 직류로 변환하여 최대 400A의 용량까지 사용할 수 있다. 본 논문에서는 자동차에 직접 장착되는 탑재형 충전기를 제안한다. 제안된 충전기는 상용전원을 입력으로 넓은 범위의 출력을 갖으며 고효율, 고역률, 고전력밀도의 충전기로 시작품을 제작하여 그 기능을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.361-362
• /
• 2010

최근 화석 연료의 고갈과 이산화탄소 배출 제한으로 인하여 내연기관 자동차에서 전기 자동차로의 대한 관심이 높아지고 있다. 전기 자동차 배터리 충전에 필요한 AC-DC 컨버터가 필요하며 컨버터의 필요 조건 으로 넓은 출력 전압 범위, 고효율, 높은 역률 등을 들수 있다. 넓은 전압 범위와 절연을 위해 2단 구성 하였다. 앞단은 LLC 컨버터를 후단은 역률을 고려 하여 BOOST 컨버터를 이용한 PFC 회로를 구현하여 실험적으로 확인 하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.47-54
• /
• 2009

A worm screw is widely used in a geared motor unit for motion conversion from rotation to linear. For mass production of a high quality worm, the current rolling process is substituted with the milling process. Since the milling process enables the integration of all operations of worm manufacturing on a CNC(Computer Numerical Control) lathe, productivity can be remarkably improved. In this study, the tooling system for planetary milling on a CNC lathe to improve machinability is developed. However, the cutting tool-workpiece interference is important factors to be considered for producing high quality worms. For adaptability of various worms machining, the tool-workpiece interference simulation system based on a tool-tip trajectory model is developed. The developed simulation system is verified through several kinds of worms and experimental results.

• Journal of Korea Foundry Society
• /
• v.12 no.1
• /
• pp.32-39
• /
• 1992

In this study, electron microscopy, Fractography and $J_{IC}$ test have been used to investigate the fracture behaviour in the scope of aging temperature which 7075 Al-alloy can have high strength. Conclusions obtained on this study are as followed. 1) When the 7075 Al-alloy was aged for 24hrs at $120^{\circ}C$, it's mechanical properties was excellent but fracture toughness decrement resulted from intergranular fracture was emerged. 2) The state of aged for 24hrs at $100^{\circ}C$, had the highest fracture toughess. 3) We could infer that intergranular fracture occurred because preferrential precpitated precipitates in the grain boundary growed in the form of colinear along the grain boundary.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.8 no.4
• /
• pp.248-253
• /
• 2008

In this paper, a novel vehicle detection algorithm is proposed that utilizes the color histogram of the image. The color histogram is used to search the image for regions with shadow, block symmetry, and block non-homogeneity, thereby detecting the vehicle region. First, an integral histogram of the input image is computed to decrease the amount of required computation time for the block color histograms. Then, shadow detection is performed and the block symmetry and block non-homogeneity are checked in a cascade manner to detect the vehicle in the image. Finally, the proposed scheme is applied to both still images taken in a parking lot and an on-road video sequence to demonstrate its effectiveness.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.605-607
• /
• 2000

Although Equvalent Magnetic Circuit (EMC) method. Using lumped parameter and numerical analysis method are widely used for electric machine analysis. these are neither always accurate enough nor sometimes available to easily use. Moreover three dimensional finite element method (3D-FEM) is inherently unsuitable for electric machine performance evaluation due to its poor computational efficiency, such as too long calculation time and difficulty in modeling for analysis. In this paper, Nonlinear Equivalent Magnetic Circuit (NEMC) method in combination with 2D-FEM is proposed to analyze the electric machine requiring 3D-FEM, and this method applys to torque evaluation for rotary actuator of Electro Magnetic Electronic Controller Power Steering (EM-ECPS).

• Journal of Magnetics
• /
• v.2 no.3
• /
• pp.67-71
• /
• 1997

A new hot-forming process has been studied to produce anisotropic Nd-Fe-B based magnets from melt-spun ribbons. The ribbon fragments were inserted in a Cu tube and hot-deformed together with one-stroke. At a height reduction ratio of 0.44, the melt-spun ribbons were densified into a magnet with a density of 7.14 g/cm3, and showed a (BH)max of 14.6 MGOe. With further deformation, the magnets were plastically deformed with Cu tubes in the lateral direction, and crystallographic anisotropy was introduced. The magnets with a height reduction ratio of 0.75 exhibited magnetic properties of (BH)max = 32.1 MGOe, Br = 11.7 kG, and iHc = 10.6 kOe. This process shows the possibility that the conventional hot-pressing and subsequent die-upsetting for anisotropic magnets can be simplified into a one-step process.