• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.5098-5115
• /
• 2017

A number of automotive electronics-safety, driver assistance, and infotainment devices-have been deployed in recent vehicles. This raises new challenges regarding in-vehicular network arbitration. A performance analysis of non-destructive arbitration has revealed a fairness issue. The arbitration prioritizes without collisions, despite multiple simultaneous transmissions; however, the performances of the highest priority node and the lowest priority node are very different. In this paper, an ID-rotation arbitration method to solve the arbitration-fairness problem is proposed. The proposed algorithm was applied to several engine control units (ECUs), including a controller area network (CAN) controller. Experimental results showed that the algorithm improved the fairness as well as the total throughput within a specific performance constraint.

• ETRI Journal
• /
• v.42 no.3
• /
• pp.351-365
• /
• 2020

Directional sensor networks (DSNs) can significantly improve the performance of a network by employing energy efficient communication protocols. Neighbor discovery is a vital part of medium access control (MAC) and routing protocol, which influences the establishment of communication between neighboring nodes. Neighbor discovery is a challenging task in DSNs due to the limited coverage provided by directional antennas. Furthermore, in these networks, communication can only take place when the beams of the directional antennas are pointed toward each other. In this article, we propose a novel multiple token-based neighbor discovery (MuND) protocol, in which multiple tokens are transmitted based on an area exploration algorithm. The performance of the protocol is evaluated using the Cooja simulator. The simulation results reveal that the proposed MuND protocol achieves lower neighbor discovery latency, with a 100% neighbor discovery ratio, and has a relatively low communication overhead and low energy consumption.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.96-103
• /
• 2013

Since multimedia data takes large part of realtime transmission in wireless communication environments such as IEEE 802.11, QoS issues became one of the important problems with network performance. 802.11e MAC provides differentiated services based on priority schemes to solve existing 802.11 MAC problems. The TXOP is an important factor with the priority to improve network performance and QoS because it defines the time duration in which multiple frames can be transferred at one time for each station. In this paper, therefore frame sizes, TXOP Limit, and Priority values in accordance with the number of stations are experimented and derived for best network performance and QoS. Using 802.11e standard parameters, simulation results show the best throughput when the number of stations is 5 and TXOP Limit value is 6.016ms. For fairness, the best result is achieved at 3.008ms of TXOP Limit value and 15-31 of CW(Contention Window) that is lower priority than CW 7-15.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.73-81
• /
• 2011

IEEE 802.11 PHY and MAC layer provide multiple channels and data rates. To improve the performance of IEEE 802.11 multi-radio ad hoc networks, it is required to utilize available channels and data rates efficiently. However, in IEEE 802.11 multi-rate networks, the rate anomaly (RA) problem occurs that the network performance is severely degraded as low-rate links affect high-rate links. Hence, in this paper, we propose a model-based rate separation (MRS) algorithm that uses multiple channels to separate different data rate links so that the RA problem is mitigated. MRS algorithm utilizes an existing throughput model that estimates the throughput of IEEE 802.11 single-hop networks to separate low-rate links and high-rate links. Through simulations, we demonstrate that the MRS algorithm shows improved network performance compared with existing algorithms in multi-radio ad hoc networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6B
• /
• pp.338-348
• /
• 2005

Currently, IEEE 802.11 Wireless LAN (WLAN) is rising as the most popular means for the broadband wireless access network. In this thesis, we propose a QoS(Quality of Service)-Oriented mechanism using handshaking method of scanning phase in IEEE 802.11 handoff. In conventional process for handoff, the major criterion to select the best AP(Access Point) among candidates is normally based on the RSS(Received Signal Strength), which does not always make the selected network guarantee the maximum achievable performance. Even though the link quality with a neighboring AP is excellent, the AP may not be a good candidate to handoff to simply because MAC(Medium Access Control) protocol of IEEE 802.11 standard is contention-based such as CSMA/CA. Therefore, if we apply network level information to AP selection criteria, we can achieve better handoff efficiency rather than before. The analysis and simulation results applied to our new mechanism show clearly better performance than AP selection based on traditional handoff method.

• Annual Conference of KIPS
• /
• 2003.05b
• /
• pp.1485-1488
• /
• 2003

IEEE 802.11 무선 랜 환경에서 멀티미디어 트래픽이 효과적으로 전송퇴기 위해서는 정해진 딜레이 바운드내에서 전송이 완료되어야 한다 대표적인 멀티미디어 트래픽인 음성신호를 전송할 때의 단방향 딜레이 바운드는 echo canceller를 쓰지 않았을 경우 $25ms{\sim}30ms$ 이다. 딜레이 바운드를 지키지 못하고 전송된다면 시간에 민감한 음성신호의 특성 때문에 음성품질이 유지되지 않을 뿐만 아니라 채널의 혼잡을 유발하게 된다. 본 논문에서는 음성의 품질이 보장되는 기준을 95%이상의 패킷이 성공적으로 전달되는 경우로 제한하여 음성의 딜레이 바운드에 관한 분석을 시도하였다. 이를 위해 음성패킷이 drop될 확률을 수학적인 분석을 통해 유도하고 시뮬레이션을 통한 검증을 시도하였다. 시뮬레이션에서는 IEEE 802.11의 두 가지 기본적인 MAC(Multiple Access Control) 프로토콜인 DCF와 PCF를 사용해서 음성신호를 전송할 때 딜레이 바운드를 지키지 못하는 음성 패킷을 사전에 drop 시킴으로써 몇 개의 음성 노드가 손실율 5% 이내 (음성의 품질이 유지되는 한계)를 만족시키는지를 음성신호를 발생시키는 STA 수와 손실율의 관계를 통해 알아보았다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.1
• /
• pp.183-195
• /
• 2014

Multicasting is an efficient way of group communications because one sender can transmit data to multiple receivers with only one transmission. Furthermore, multicasting is considered an appropriate transmission method for multimedia services. Multimedia applications are expected to become more prevalent over mobile ad-hoc networks in the near future. Therefore, achieving reliability in multimedia communications is an important task. In this paper, we propose a leader-based reliable multicast medium access control layer protocol for multimedia applications to enhance video quality. We present a Markov chain model and numerical formulation of our proposed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.199-208
• /
• 2014

Code division multiple access (CDMA) is one of the promising medium access control (MAC) schemes for underwater acoustic sensor networks because of its robustness against frequency-selective fading and high frequency-reuse efficiency. As a way of performance evaluation, sea or lake experiment has been employed along with computer simulation.. In this study, we design the underwater CDMA forward-link transceiver and evaluate the feasibility aginst harsh underwater acoustic channel in water-tank first. Then, based on the water-tank experiment results, we improved the transceiver and showed the improvements in a lake experiment. A pseudo random noise code acquisition process is added for phase error correction before decoding the user data by means of a Walsh code in the receiver. Interleaving and convolutional channel coding scheme are also used for performance improvement. Experimental results show that the multiplexed data is recovered by means of demultiplexing at receivers with error-free in case of two users while with less than 15% bit error rate in case of three and four users.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.3012-3028
• /
• 2017

In this paper, we propose a joint power control strategy for both the uplink and downlink transmission by considering the energy requirements of the user equipments' uplink data transmissions in data and energy integrated communication networks (DEINs). In DEINs, the base station (BS) adopts the power splitting (PS) aided simultaneous wireless information and power transfer (SWIPT) technique in the downlink (DL) transmissions, while the user equipments (UEs) carry out their own uplink (UL) transmissions by exploiting the energy harvested during the BS's DL transmissions. In our DEIN model, there are M UEs served by the BS in order to fulfil both of their DL and UL transmissions. The orthogonal frequency division multiple access (OFDMA) technique is adopted for supporting the simultaneous transmissions of multiple UEs. Furthermore, a transmission frame is divided into N time slots in the medium access control (MAC) layer. The mathematical model is established for maximizing the sum-throughput of the UEs' DL transmissions and for ensuring their fairness during a single transmission frame T, respectively. In order to achieve these goals, in each transmission frame T, we optimally allocate the BS's power for each subcarrier and the PS factor for each UE during a specific time slot. The original optimisation problems are transformed into convex forms, which can be perfectly solved by convex optimisation theories. Our numerical results compare the optimal results by conceiving the objective of maximising the sum-throughput and those by conceiving the objective of maximising the fair-throughput. Furthermore, our numerical results also reveal the inherent tradeoff between the DL and the UL transmissions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.10
• /
• pp.2509-2528
• /
• 2012

Time division multiple access (TDMA) is a widely used media access control (MAC) technique that can provide collision-free and reliable communications, save energy and bound the delay of packets. In TDMA, energy saving is usually achieved by switching the nodes' radio off when such nodes are not engaged. However, the frequent switching of the radio's state not only wastes energy, but also increases end-to-end delay. To achieve high energy efficiency and low delay, as well as to further minimize the number of time slots, a multi-objective TDMA scheduling problem for industrial wireless mesh networks is presented. A hybrid algorithm that combines genetic algorithm (GA) and simulated annealing (SA) algorithm is then proposed to solve the TDMA scheduling problem effectively. A number of critical techniques are also adopted to reduce energy consumption and to shorten end-to-end delay further. Simulation results with different kinds of networks demonstrate that the proposed algorithm outperforms traditional scheduling algorithms in terms of addressing the problems of energy consumption and end-to-end delay, thus satisfying the demands of industrial wireless mesh networks.