• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1870-1875
• /
• 2006

This study was carried out to investigate the applicability of SAC-SMA model with parameters which were derived from analytical relationships proposed by Koren etc. (2000), with various data of soil properties in a basin. The studied basin is Yongdam dam basin and the daily runoff with 2003-year hydrological data was simulated. Simulated runoff results were compared with those measured at three check points(Chuchun, Donhyang and Yongdam) and analyzed through the statistical techniques such as VE(Volume Error), RMSE(Root Mean Squared Error) and CORR(Correlation). As a result of analyses, the good agreement was obtained between simulated and measured results.

• Wind and Structures
• /
• v.6 no.3
• /
• pp.221-248
• /
• 2003

The design of high-rise building is often influenced by wind-induced motions such as accelerations and lateral deflections. Consequently, the building's structural stiffness and dynamic (vibration periods and damping) properties become important parameters in the determination of such motions. The approximate methods and empirical expressions used to quantify these parameters at the design phase tend to yield values significantly different from each other. In view of this, there is a need to examine how actual buildings in the field respond to dynamic wind loading in order to ascertain a more realistic model for the dynamic behavior of buildings. This paper describes the findings from full-scale measurements of the wind-induced response of typical high-rise buildings in Singapore, and recommends an empirical forecast model for periods of vibration of typical buildings in Singapore, an appropriate computer model for determining the periods of vibration, and appropriate expressions which relate the wind speed to accelerations in buildings based on wind tunnel force balance model test and field results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.7
• /
• pp.615-620
• /
• 2001

This paper addresses the design of sliding model fuzzy-model-based controller using genetic algorithms. In general, the construction of fuzzy logic controllers has difficulties for the lack of systematic design procedure. To release this difficulties, the sliding model fuzzy-model-based controllers was presented by authors. In this proposed method, the fuzzy model, which represents the local dynamic behavior of the given nonlinear system, is utilized to construct the controller. The overall controller consists of the local compensators which compensate the local dynamic linear model and the feed-forward controller which is designed via sliding mode control theory. Although, the stability and the performance is guaranteed by the proposed method, some design parameters have to be chosen by the designer manually. This problem can be solved by using genetic algorithms. The proposed method tunes the parameters of the controller, by which the reasonable accuracy and the control effort is achieved. The validity and the efficiency of the proposed method are verified through simulations.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.1
• /
• pp.16-22
• /
• 2013

This paper presents the analysis and optimization of air-core permanent magnet linear synchronous motor with overlapping concentrated windings to achieve high thrust density, high thrust per copper losses and low thrust ripple. For the motor design, we adopt equivalent magnetizing current (EMC) method to analyze the magnetic field and give analytical formulae for calculation of motor parameters such as no-load back EMF, dynamic force, thrust density and thrust per copper losses. Further, we proposed a multi-objective optimization by genetic algorithm to search for the optimum parameters. The design optimization is verified by 2-D Finite Element analysis (FEA).

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.1
• /
• pp.74-85
• /
• 1990

The LQG and LQG/LTR compensators have the same structrues in dynamics. The only difference is the values of the design parameters in the two compensators. The design parameters of the LQG and LQG/LTR compensators are selected in the sense of the least-squares error minimi- zation and loop shaping, respectively. In this paper, the LQG and LQG/ LTR design methods are applied to the helicopter in hover which is modeled as a SISO fourth order system. The dynamic characteristics and the perfor- mance of the two control systems are analyzed by the computer simulation. It is found that the LQG/LTR design method is systematic and has good performance in comparision with the LQG design method.

• Structural Engineering and Mechanics
• /
• v.57 no.2
• /
• pp.369-387
• /
• 2016

In this work, random homogenization analysis for the effective thermal properties of a three-dimensional composite material with unidirectional fibers is presented by combining the equivalent inclusion method with Random Factor Method (RFM). The randomness of the micro-structural morphology and constituent material properties as well as the correlation among these random parameters are completely accounted for, and stochastic effective thermal properties as thermal expansion coefficients as well as their correlation are then sought. Results from the RFM and the Monte-Carlo Method (MCM) are compared. The impact of randomness and correlation of the micro-structural parameters on the random homogenized results is revealed by two methods simultaneously, and some important conclusions are obtained.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.5
• /
• pp.501-503
• /
• 1998

In this work, we applied the 1D $11^B$ nutation NMR method for the analysis of the local structural environments in powdered borosilicates $(SiO_2-B_2O_3)$. Spin dynamics during a rf irradiation for spin I=3/2 was analytically calculated with a density ma trix formalism. Spectral simulation programs were written in MATLAB on a PC. Two borosilicates prepared by the sol-gel process at different stabilization temperature were used for the 1D $11^B$ nutation NMR experiment. The $11^B$ NMR parameters, quadrupole coupling constants $(e^2qQ/h)$ and asymmetry parameters (η), for each borosilicate were extracted from the nonlinear least-squares fitting. The effects of heat treatments on the local structures of boron sites in borosilicates were discussed.

• PNF and Movement
• /
• v.11 no.1
• /
• pp.63-68
• /
• 2013

Purpose : The purpose of this study was to examine changes in spatiotemporal gait parameters(STGPs) in healthy adults before and after a immediate intervention of a Mulligan taping program(MTP). Methods : A total of 12 healthy adults(mean age, 20.82 years; age range, 19-24 years) participated in the study. performance was assessed by recording changes in the STGPs using GaitRite. comparisons of changes in the STGPs at pre-intervention and at dischange were analyzed using the Wilcox signed rank test and Mann-Whithney U test. Results : There was a significant improvement in the outcome measures of STGPs(stride length, velocity) after immediate of MTP(p<0.05). However, no significant different pre-test and post-test step width, toe angle(p>0.05). Conclusion : Participants in a MTP improves STGPs, thereby increasing the ability of healthy adults to maintain gait. MTP appears to be a safe and efficacious, noninvasive treatment modality for patients with knee joint disease.

• Journal of the Korean Statistical Society
• /
• v.16 no.1
• /
• pp.1-9
• /
• 1987

Recently a new form of the extended Yule-Walker equations for a mixed autoregressive moving-average process of orders p and q has been proposed. It can be used to obtain p+q+1 parameter values from the first p+q+1 autocovariance terms. The autoregressive part of the equations is linear and can be easily solved. In contrast the moving-average part is composed of nonlinear simultaneous equations. Thus some iterative algorithms are necessary to solve them. The iterative algorithm presented by Choi(1986) is very simple but its convergence has not been proved yet. In this paper a Newton-Raphson solution for the moving-average parameters is presented and its convergence is shown. Also numerical example illustrate the performance of the algorithm.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.84-87
• /
• 2008

본 논문에서는 Q.Wang & R.K.Ward 가 제안한 WTHE(weighted and thresholded histogram equalization)방법의 enhancement parameters를 주어진 영상의 히스토그램 분포에 따라 적응적으로 제공하는 방법을 제안한다. WTHE는 영상의 히스토그램을 weight와 threshold를 이용하여 변형한 후 히스토그램 평활화(histogram equalization : HE)방법을 수행 함으로써 화질을 개선하는 방법이다. 이 방법은 두 가지 parameters 제어로 기존의 히스토그램 평활화 방법의 단점인 과도한 밝기 변화와 불필요한 artifacts를 줄일 수 있다. 본 논문에서는 WTHE 방법을 좀 더 간편하면서 다양한 분야에 적용하기 위해서 입력 영상에 따라 달라지는 parameters 값을 자동으로 제공하는 적응형 WTHE(Adaptive WTHE : AWTHE) 방법을 제안하고, 제안된 방법의 성능을 실험으로 제시한다.