• Journal of Life Science
• /
• v.16 no.5
• /
• pp.711-715
• /
• 2006

The objective of this study was focused on the enhancement of pollen germination frequency in peach (Prunus $persica\;_{SIEB}$) under low temperature conditions. The effect of factors such as amino acid, polyamine, and flavonoid on the pollen germination was investigated, and the results are summarized as follows. When amino acid, polyamine or flavonoid was added to the germination medium at $10^{\circ}C$, pollen germination frequency was strongly promoted. Optimum concentration of each supplement for pollen germination enhancement was $100\;mg{\cdot}L^{-1}\;H_3BO_3$, 10 mM asparagine, 10 mM glutamine, 100 mM spermine, $1000\;{\mu}M$ putrescine, and $1.0\;{\mu}M$ kaemferol. The best combination of factors in pollen germination was $100\;mg{\cdot}L^{-1}\;H_3BO_3+10\;mM$ asparagine, followed by $100\;mg{\cdot}L^{-1}\;H_3BO_310mM$ glutamine, $100\;mg{\cdot}L^{-1}\;H_3BO_3+200mM$ spermine, and 10 mM asparagine. These combinations promoted pollen germination by 18% in 'Nagasawa-Hakuho', and 19% in 'Shuho' compared to their germination percentage on the basal medium.

• Korean Journal of Materials Research
• /
• v.23 no.6
• /
• pp.329-333
• /
• 2013

The structural phase transformations of $0.7Pb(Mg_{1/3}Nb_{2/3})O_3-0.3PbTiO_3$ (PMN-0.3PT) were studied using high resolution x-ray diffraction (HRXRD) as a function of temperature and electric field. A phase transformational sequence of cubic (C)${\rightarrow}$tetragonal (T)${\rightarrow}$rhombohedral (R) phase was observed in zero-field-cooled conditions; and a $C{\rightarrow}T{\rightarrow}$monoclinic $(M_C){\rightarrow}$ monoclinic ($M_A$) phase was observed in the field-cooled conditions. The transformation of T to $M_A$ phase was realized through an intermediate $M_C$ phase. The results also represent conclusive and direct evidence of a $M_C$ to $M_A$ phase transformation in field-cooled conditions. Beginning from the zero-field-cooled condition, a $R{\rightarrow}M_A{\rightarrow}M_C{\rightarrow}T$ phase transformational sequence was found with an increasing electric field at a fixed temperature. Upon removal of the field, the $M_A$ phase was stable at room temperature. With increasing the field, the transformation temperature from T to $M_C$ and from $M_C$ to $M_A$ phase decreased, and the phase stability ranges of both T and $M_C$ phases increased. Upon removal of the field, the phase transformation from R to $M_A$ phase was irreversible, but from $M_A$ to $M_C$ was reversible, which means that $M_A$ is the dominant phase under the electric field. In the M phase region, the results confirmed that lattice parameters and tilt angles were weakly temperature dependent over the range of investigated temperatures.

• Preventive Nutrition and Food Science
• /
• v.15 no.2
• /
• pp.105-112
• /
• 2010

Thirty-four strains of Lactobacillus species were isolated from soil and eight of these isolates (M1-4 and P1-4) were capable of growing on red ginseng agar. The M1 and P2 strains were determined to be L. plantarum and other strains (M2, M3, M4, P1, P3 and P4) were determined to be L. brevis. Fermentation of red ginseng extract (RGE) with strains M1, M2, P2 and P4 resulted in a low level of total carbohydrate content (174.3, 170.0, 158.8 and 164.8 mg/mL, respectively). RGE fermented by M3 showed a higher level of uronic acid than the control. The polyphenol levels in RGE fermented by M1, P1 and P2 (964.9, 941.7 and $965.3\;{\mu}g/mL$, respectively) were higher than the control ($936.8\;{\mu}g/mL$). Total saponin contents in fermented RGE (except M1) were higher than the control. RGE fermented by M2 and M3 had the highest levels of total ginsenosides (31.7 and 32.7 mg/mL, respectively). The levels of the ginsenoside Rg3 increased from 2.6 mg/mL (control) to 3.0 mg/mL (M2) or 3.1 mg/mL (M3). RGE fermented by M2 and M3 also had the highest levels of Rg5+Rk1 (7.7 and 8.3 mg/mL, respectively). Metabolite contents of ginsenoside (sum of CK, Rh1, Rg5, Rk1, Rg3 and Rg2) of M2 (13.0 mg/mL) and M3 (13.9 mg/mL) were also at a high level among the fermented RGE. Protopanaxadiol and protopanaxatriol content of ginsenoside of M2 (10.9 and 5.4 mg/mL, respectively) and M3 (11.0 and 5.7 mg/mL, respectively) were at higher levels than other fermented RGE.

• Journal of Animal Reproduction and Biotechnology
• /
• v.34 no.3
• /
• pp.247-252
• /
• 2019

We observed MMPs expression in all sperm groups, with pro-MMP showing lower expression than active MMPs. According to the results from each freezing extender, the sperm membrane integrity (HOST: Hypoosmotic Swelling Test) analysis in TCGGD (Tris 250 mM, Citric acid 88 mM, Glucose 47 mM, Glycerol 3%, Dimethylsulpoxide 3.5 M) is 59.8 ± 0.7, TCGSD (Tris 250 mM, Citric acid 88 mM, Glucose 47 mM, Sucrose 0.1 M, Dimethylsulpoxide 3.5 M) is 59.3 ± 0.5 were significantly higher (p < 0.05) among the experimental groups. And MMPs analysis result, we observed MMPs expression in all sperm groups, with pro-MMP showing lower expression than active MMPs. The expression of active MMP-2 was the highest in sperms frozen in TCGSD and TCGD (Tris 250 mM, Citric acid 88 mM, Glucose 47 mM, Dimethylsulpoxide 3.5 M), Meanwhile, sperms from the TCGGD and TCGED (Tris 250 mM, Citric acid 88 mM, Glucose 47 mM, Ethylene glycol 3%, Dimethylsulpoxide 3.5 M) group showed lower level of active MMP-2 expression. Together, these results indicate that adding glycerol or sucrose to the sperm freezing buffer would not only suppress MMPs expression but also minimize DNA fragmentation, providing a mean to improve the success rate in the in vitro manipulation of rabbit sperms. Therefore, these results suggest that TCGGD or TCGSD extender method for freezing-thawing of rabbit sperm increased the viability after thawing.

• Journal of Korean Society of Transportation
• /
• v.15 no.1
• /
• pp.129-156
• /
• 1997

8차로 고속도로에서 중앙분리대와 길 어깨에 의해 측방 여유폭이 제공되는 외측차 로(1.4차로)와 측방 여유폭이 제공되지 않는 내측차로 (2.3차로)에서 나타나는 운전자의 횡 방향 주행특성을 4개 지점에서 비디오 촬영하여 분석한 결과는 다음과 같다. (1) 차량의 횡 방향 주행궤적은 차로의 중심으로부터 주행방향의 좌측으로 이격된 주행 행태를 보이고 있 으며 이는 운전석의 위치에 의한 영향으로 판단된다. (2) 차량의 병행 주행시 외측 차로의 중심 이격 거리는 평균 0.38m이고 내측차로의 중심 이격 거리는 평균 0.34m로 나타났으며 T-test 겨로가 내측 차로와 외측 차로의 주행 이격 거리는 신뢰도 95%에서 상이한 것으로 나타났다. (3) 외측 차로의 주행궤적간 이격 거리는 평균 3.90m이고 내측 차로의 주행궤적 간 이격 거리는 평균 3.54m로서 내측 차로의 주행궤적간 이격 거리는 외측 차로의 주행궤 적간 이격 거리보다 0.36m 작다. 특히 내측 차로의 주행궤적간 이격 거리는 내측 차로간 차로 중심간 간격인 3.6m 보다 0.1m 작은 것으로 나타났다. (4) 내측차로 확장 대안으로 기존 도로폭 유지안 (3.5m, 3.7m, 3.5m)과 기존 도로폭 확장안 (3.6m, 3.7m, 3.7m, 3.6m)을 고려할 수 있으며 두 대안의 비교·분석결과 경제적 영향을 고려할 때 기존 도로폭 유지안이 우수한 것으로 분석되었다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.3
• /
• pp.70-76
• /
• 2001

Proper design and improvement of the biofiltration process depend upon quantitative understanding of the kinetic behavior in the biofilter. This study was conducted to evaluate kinetics of biofiltration of gasoline vapor. Filling material of the biofilter was compost. Gas inlet concentration ranged from about $300mg/m^3$ to $7,000mg/m^3$. Gas velocities were 6m/hr and 15m/hr, respectively. At 6m/hr gas velocity, about 60% of gasoline TPH below $3,000mg/m^3$ was removed in the lower quarter part of the biofilter. First order kinetics described well the degradation rate of gasoline TPH with high correlation. First order kinetic removal constant at the gas velocity of 6m/hr was higher than that of 15m/hr from about $300mg/m^3$ to $7,000mg/m^3$. When the inlet concentration was over $3,000mg/m^3$, first order kinetic removal constant at the gas velocity of 6m/hr was over twice that at 15m/hr. In order to obtain over 80% of removal efficiency, gasoline vapor should be injected into the biofilter at concentration below about $2,000mg/m^3$, 100cm filling height and the gas velocity of 6m/hr.

• Journal of environmental and Sanitary engineering
• /
• v.20 no.4 s.58
• /
• pp.21-30
• /
• 2005

This research was performed to measure the concentration distribution of bioaerosol in apartment houses in the region of Chungnam (Chunan, Asan) for 1 month, December, 2004. The results are as follows. 1. By using SDA method, the average concentration of total microbe and fungus in the air inside and outside apartment house below 4 years are $69,42cfu/m^3\;and\;15.66cfu/m^3$, while apartment house over 4 years, $214.58cfu/m^3\;and\;216.43cfu/m^3$, respectively With gravitational sedimentation method, the average concentration of total microbe and fungus of apartmenthouse below 4 years are $100.63cfu/m^3\;and\;22.83cfu/m^3$, while apartment house over 4 years, $216.43cfu/m^3\;and\;70.000cfu/m^3$, respectively. 2. The I/O ratio of floating germ of apartment house below 4 years and over 4 years are 2.87 and 5.12 for total microbe, and 3.32 and 8.28 for fungus, respectively. The I/O ratio of falling germ of apartment house below 4 years and over 4 years are 1.55 and 2.81 for total microbe, and 2.85 and 4.08 for fungus, respectively. The apartment house below 4 years shows a low I/O ratio in all cases. 3. The difference in concentration of microbe between inside master bedroom and living room of apartment house below 4 years is $13.183cfu/m^3$, total microbe, and $4.787cfu/m^3$, fungus, while, apartment house over 4 years, $43.531cfu/m^3$, total microbe, and $21.932cfu/m^3$, fungus. The measured differences are statistically significant. 4. Air sampler was used to verify the difference in concentration of microbe with the age of apartment house. The difference in concentration of total microbe and fungus for outside apartment house below 4 years and over 4 years are $49.82cfu/m^3$ and $3.78cfu/m^3$, respectively. The difference of inside living room shows $160.23cfu/m^3$ for total microbe and $28.01cfu/m^3$ for fungus, and the difference of inside master bedroom shows $225.43cfu/m^3$ for total microbe and $56.73cfu/m^3$ for fungus. The differences are statistically significant. The difference in concentration of outside apartment house below 4 years and years 4 years are $34.66cfu/m^3$, total microbe, and $15.66cfu/m^3$, fungus, while inside apartment house below 4 years and over 4 years, $196.93cfu/m^3,\;and\;78.67cfu/m^3$, respectively. The measured differences are statistically significant.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.793-805
• /
• 2008

Recently, steel modular systems are developed and have been applied to the projects requiring fast construction such as military barracks and vertical expansion of school buildings. The existing modular system with standard module of ${6m\times3m}$ has a problem that many columns are duplicated in the module connection and the wall thickness increases. In this study, $12m{\times}3m$ module is proposed to solve this problem. Various types of beam-middle column connection which are essential for realizing the $12m{\times}3m$ module are proposed and their maximum load capacity and failure mode are analytically and experimentally evaluated. The comparison between analytical and experimental results shows that the maximum axial load and failure mode can be accurately estimated by finite element analysis. Some connection types which have higher failure load than the design load of the column, can be used as the beam-middle column connection detail of the $12m{\times}3m$ module.

• Explosives and Blasting
• /
• v.33 no.4
• /
• pp.1-6
• /
• 2015

Abstract This study is to efficiently calculate and evaluate the elements of advance, overbreak and underbreak on the mine under the production using the 3D laser scanner. For this purpose, a 3D laser scanner was sued to acquire the point-cloud which records the space coordinates and modelling of the underground tunnel using the 3D modeling program. When each element was observed through the study result, the advance on the center cut was 2.6m in average while the total advance was 2.4m. If the drilling length of 3.8m is based, the advance rate was evaluated to be 67% in average in the center cut section with the total average of 64%. In addition, when the volume of overbreak was measured based on the design cross section, the average overbreak volume was found to be $4.5m^3$ on left wall, $4.5m^3$ on right wall, and $5m^3$ on roof with the total volume of $14m^3$. When the overbreak volume is measured based on the look-out cross section, it was $3m^3$ on roof with the total volume of $8.4m^3$. The rate of overbreak volume against the average excavation volume was 8% based on the design cross section and 5% based on the look-out cross section.

• Journal of the Korean Chemical Society
• /
• v.39 no.7
• /
• pp.530-537
• /
• 1995

The neutral complexes $MCl_3(phda)(MeCN)]$ and $[MCl_3(PPh_3)_2(MeCN)]$ (M=Mo, V) were prepared by the reaction of $MCl_z$, (M=Mo; z=5, M=V; z=3) with N, P-donating ligands in acetonitrile solution. Addition of AgClO_4$ to these neutral monomeric complexes in acetone solution afforded $MCl_{3-n}L_2(MeCN)(S)_n](ClO_4)_n$ (n=1, 2 : s=solvent). Two types of asymmetrical homo- and hetero-dinuclear complexes have been synthesized. The type of chloride bridged dinuclear complex is $[(MeCN)(phda)ClM({\mu}-Cl)_2M'Cl(PPh_3)_2(MeCN)](ClO_4)_2.$ And the type of pyrazine bridged complex is $[(MeCN)(phda)Cl_2M({\mu}-pyz)M'Cl_2(PPh_3)_2(MeCN)](ClO_4)_2.$ These complexes were characterized by elemental analysis, $^1H,\;^13C$ NMR, IR, Far-IR and UV-Vis spectroscopy.