• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.205-210
• /
• 2015

The auto industry has significantly evolved to the extent that much attention is paid to M2M (Machine-to-Machine) communication. In M2M communication which was first used in meteorology, environment, logistics, national defense, agriculture and stockbreeding, devices automatically communicate and operate in accordance with varying situations. M2M system is applied to vehicles, specifically to device-to-device communication inside cars, vehicle-to-vehicle communication, communication between vehicles and traffic facilities and that between vehicles and surroundings. However, communication systems are characterized by potential intruders' attacks in transmission sections, which may cause serious safety problems if vehicles' operating system, control system and engine control parts are attacked. Thus, device-to-device secure communication has been actively researched. With a view to secure communication between vehicular devices, the present study drew on hash functions and complex mathematical formulae to design a protocol, which was then tested with Casper/FDR, a tool for formal verification of protocols. In brief, the proposed protocol proved to operate safely against a range of attacks and be effective in practical application.

• The korean journal of orthodontics
• /
• v.35 no.4 s.111
• /
• pp.262-274
• /
• 2005

Tooth movement is a result of mutual physiologic responses between the periodontal ligament and alveolar bone stimulated by mechanical strain. The PDL cell and osteoblast are known to have an influence on bone formation by controlling collagen synthesis and alkaline phosphatase activation. Moreover. recent studies have shown that the PDL cell and osteoblast release osteoprotegerin (OPG) and the receptor activator of nuclear factor ぉ ligand (RANKL) to control the level of osteoclast differentiation and activation which in turn influences bone resorption. In this study. progressively increased, continuous tensional force was applied to PDL cells. The objective was to find out which kind of biochemical reactions occur after tensional force application and to illuminate the alveolar bone resorption and apposition mechanism. Continuous and progressively increased tensile force was applied to PDL cells cultured on a petriperm dish with a flexible membrane The amount of $PGE_2$ and ALP synthesis were measured after 1, 3, 0 and 12 hours of force application. Secondly RT-PCR analysis was carried out for OPG and RANKL which control osteoclast differentiation and MMP-1 -8, -9, -13 aud TIMP-1 which regulate the resolution of collagen and resorption of the osteoid layer According to the results. we concluded that progressively increased, concluded force application to human PDL cells reduces $PGE_2$ synthesis, and increases OPG mRNA expression.

• Toxicological Research
• /
• v.27 no.3
• /
• pp.137-141
• /
• 2011

This study was conducted to assess the exposure risk through inhalation to baby powder for babies and adults under simulated conditions. Baby powder was applied to a baby doll and the amount of baby powder consumed per application was estimated. The airborne exposure to baby powder during application was then evaluated by sampling the airborne baby powder near the breathing zones of both the baby doll and the person applying the powder (the applicator). The average amount of baby powder consumed was 100 mg/application, and the average exposure concentration of airborne baby powder for the applicator and baby doll was 0.00527 mg/$m^3$ (range 0.00157~0.01579 mg/$m^3$) and 0.02207 mg/$m^3$ (range 0.00780~0.04173 mg/$m^3$), respectively. When compared with the Occupational Exposure Limit of 2 mg/$m^3$ set by the Korean Ministry of Labor and the Threshold Limit Value (TLV) of 2 mg/$m^3$ set by the ACGIH (American Conference of Governmental Industrial Hygienists), the exposure concentrations were much lower. Next, the exposure to asbestos-containing baby powder was estimated and the exposure risk was assessed based on the lung asbestos contents in normal humans. As a result, the estimated lung asbestos content resulting from exposure to asbestos-containing baby powder was found to be much lower than that of a normal Korean with no asbestos-related occupational history.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1236-1242
• /
• 2019

Recently, according to improvement of robot technology, research for mobile robot is increasing. Mobile robot having 2-wheels or 4-wheels is easy for straight driving but is difficult for direction change and rotation. So, ball robot having one contact point with base is interested by researchers. By characteristics of the one contact, ball robot is required the balancing and driving control. In this paper, smart phone application, which is usable for control by wireless communication, is proposed. The ball robot having the proposed smart phone application is designed and manufactured. Balancing and driving control by wireless communication is conducted. From the test, it is conformed that ball robot has the control performances as roll angle error is ±0.8deg, pitch angle error is ±0.7deg, x-axis position error is ±0.1m, and y-axis position error is ±0.08m for 1m driving control.

• Atmosphere
• /
• v.26 no.3
• /
• pp.483-492
• /
• 2016

We have examined the random error of eddy covariance (EC) measurements on the basis of two-tower approach during daytime. Two EC towers were placed on the grassland with different vegetation density near Gumi-weir. We calculated the random error using three different methods. The first method (M1) is two-tower method suggested by Hollinger and Richardson (2005) where random error is based on differences between simultaneous flux measurements from two towers in very similar environmental conditions. The second one (M2) is suggested by Kessomkiat et al. (2013), which is extended procedure to estimate random error of EC data for two towers in more heterogeneous environmental conditions. They removed systematic flux difference due to the energy balance deficit and evaporative fraction difference between two sites before determining the random error of fluxes using M1 method. Here, we introduce the third method (M3) where we additionally removed systematic flux difference due to available energy difference between two sites. Compared to M1 and M2 methods, application of M3 method results in more symmetric random error distribution. The magnitude of estimated random error is smallest when using M3 method because application of M3 method results in the least systematic flux difference between two sites among three methods. An empirical formula of random error is developed as a function of flux magnitude, wind speed and measurement height for use in single tower sites near Nakdong River. This study suggests that correcting available energy difference between two sites is also required for calculating the random error of EC data from two towers at heterogeneous site where vegetation density is low.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.2
• /
• pp.11-16
• /
• 2009

This study introduces the verification, validation & accreditation (VV&A) process for modeling & simulation (M&S). VV&A is standard process for credibility of M&S. In several countries including USA, for weapon system of Defense Development using M&S, VV&A is necessary procedures to acquire official approving for credibility of M&S. Many countries have regular recommend practice guide (RPG) and instructive for VV&A of M&S. In this study, we focus the VV&A key concepts as Department of Defense RPG of USA and give the outline of the main VV&A concepts because we don't have any available VV&A Instructive. Also, this report documents the first significant VV&A application for a MITS(M-SAM Integrate Test System) including Verification and Validation(V&V) activity and tasks.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.2
• /
• pp.38-49
• /
• 2001

This paper presents a new voltage down converter(VDC) using charge and discharge current adjustment circuitry that provides high frequency application. This VDC consist of a common driving circuit and compensation circuits: 2 sensors and each driving transistors for controlling gate current of driving transistor. These sensors are operated as adaptive biasing method with high speed and low power consumption. This circuit is designed with a $0.62{\mu}m$ N well CMOS technology. In H-spice simulation results, internal voltage is bounded ( IV, +0.6V) in proposed circuitry when load current rapidly increases and decreases during Gns between 0 and $200m{\Lambda}$. And the recovery time of internal voltage is about 7ns and 10ns when load current increases and decreases respectively. That is fast better than common driving circuit. Total power consumption is about 1.2mW.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.635-641
• /
• 2012

In Korea, slurry composted and biofiltered (SCB) liquid fertilizer is produced through the composting and biofiltering of animal waste. An appropriate guidelines involving proper treatment of SCB liquid fertilizer on turfgrass should be considered. An experiment was conducted to determine the optimum application amount, timing, and frequency of SCB liquid fertilizer for Zoysia japonica 'Millock'. The SCB liquid fertilizer was applied in low, medium, and high amount (N at 15, 25, and 40 $g{\cdot}m^{-2}$ per year in 2010, and 10, 20, and 40 $g{\cdot}m^{-2}$ per year in 2011, respectively) and treated during the growing season or dormancy period. During the growing season, SCB liquid fertilizer was applied twice or four times. The greatest improvement in turf quality for both years was in SCB plots applied four times with N at 40 $g{\cdot}m^{-2}$ per year during the growing season (SH4). This treatment exhibited turf color retention in the fall, and enhanced clipping yield during the growing and fall seasons. SCB plots with four times during the growing season (SL4, SM4, and SH4) exhibited higher shoot density relative to the same amount of other SCB treatments. Plots treated during the dormancy period also showed a high turf color index during the next growing season in 2011. The results indicate that SCB with high amount up to N at 40 $g{\cdot}m^{-2}$ per year applied four times during the growing season and dormant application produced high turf quality and growth, and could be recommended as an optimum application guide.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.482-484
• /
• 2005

The Modulation Transfer Function (MTF) is commonly used to characterize the spatial quality of imaging systems. This work is the attempt to measure the MTF at Nyquist frequency of the satellite imaging system what has 1m spatial resolution for KOMPSAT-2 image using the edge function. Artificial tarp targets are used in this study. A type of this tarp edge consists of two adjacent uniform bright and dark sides commonly used to test the performance of an optical system in edge function. The results from this work demonstrate the potential applicability of this method to estimate the response characteristics for KOMPSAT-2 that is scheduled to be launched.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.2
• /
• pp.127-133
• /
• 2003

The purpose of this study is to investigate the positive or negative effects of 5-aminolevulinic acid(ALA) on the growth of several crops and weeds, by applying a seed soaking treatment, foliar treatment, and application timing, while comparing biological activity between ALA produced by chemical synthesis (Synthetic-ALA) and extracellularly-accumulated ALA by overexpressing the hemeA gene isolated from Bradyrhizobium japonicum(Bio-ALA). Seed soaking treatment of ALA in barley (five cultivars) and wheat (five cultivars) had not shown positive effects at lower concentrations, 0.05 to 0.5 mM as well as negative effects at higher concentrations, 1 to 30 mM. In rice, there also was no positive effect by seed soaking treatment of ALA at lower concentrations, although the rice became damaged by an application of 5 and 10 mM ALA. Growth in barley cultivars, Ganghossalbori, Naehanssalbori, Songhakbori, Saessalbori, and Daehossalbori were increased up to 14%, 19-51 %, 17-64%, 18-23%, and 22-38% by ALA foliar application at lower concentrations, 0.05 to 0.5 mM, respectively. On the other hand, the growth in barley cultivars was inhibited by ALA foliar application at higher concentrations. Barley responded more positively to ALA foliar application than wheat and rice. The growth stimulation caused by ALA seed soaking treatment was less than by ALA foliar treatment. ALA treatment at the 1.5-leaf stage increased growth of barley by 19-58%, while pretreatment to seeds, post-emergence treatment at 3 days after seeding, 3-leaf stages, and 5-leaf stages had not shown positive effects. Thus, the positive effects of ALA on barley were dependent greatly upon the timing of application and its concentration. Monocots weeds were more sensitive to ALA foliar treatment than dicotyledonous weeds. A monocot weed, Setaria viridis L. was the most susceptible plant to ALA while a dicotyledonous weed, Plantago asiatica L. was the most tolerant. No significant difference in biological activity between bio-ALA and synthetic ALA on barley, wheat, rice, and weed, Ixeris dentate tested was observed. Thus, ALA produced by microorganisms would be a potent substance to be used effectively in agricultural production.