• 한국통신학회논문지
• /
• 제8권4호
• /
• pp.139-144
• /
• 1983

本論文에서는 MCT(magnito-optic current transformer)를 구성하기 위한 單一모우드光纖維의 偏光特性 및 파라데이回轉에 대한 分析 및 實驗을 하였다. 分析過程에서 單一모우드光纖維는 線形延器로 모델링하였으며 측정결과 순수 birefringence는 2.57 /m로 나타났고 구부림에 의한 birefringence는 구부림 반지름의 제곱에 반비례하였다. 그리고 파라데이回轉에 대한 理論的解析의 결과 자계의 세기(H)에 대한 편광회전감도(F)는 F/H=1.4x$10^-5$rad/[Am]로 나타났다.

• 천문학회보
• /
• 제39권2호
• /
• pp.115-115
• /
• 2014

First, We will briefly introduce early science results of AGN observations with KVN and KaVA. KaVA is the combined array of the Korean VLBI network (KVN) and VLBI Exploration of Radio Astronomy (VERA). These include KaVA monitoring of M87, Sgr A* and a few bright blazars and KVN Search for circular polarized Blazars. Furthermore, we will present our future plan of monitoring observation of Sgr A* and M87 with KaVA and Low Radio Power AGN multi frequency polarization survey with KVN. Because of the largeness of their centralsuper-massive black holes, we select them as top-priority sources of our key science program (KSP). The main science goals of the KaVA KSP are (1) mapping the velocity field of the M87 jet and testing magnetically-driven-jet paradigm, and (2) obtaining tightest constraints on physical properties of radio emitting region in Sgr A. High sensitivity achieved through simultaneous multifrequency phase referencing technique of KVN will allow us to explore Low Radio Power AGN cores which build majority of AGNs and therefore are important for undestanding the evolution of AGNs and of their hosts.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권7호
• /
• pp.872-878
• /
• 2003

As the results of recent industrial development, many industrial plants and marine structures are exposed to severe corrosion environment than before. Especially, under the wet environment, crevice corrosion damage problems necessarily occur and encourage many interests to prevent them. In this study, the electrochemical polarization test was carried out to study characteristics of crevice corrosion for AISI 304 stainless steel in various solution temperatures. The results are as follows ; 1) as the solution temperature increased in IN $\textrm{H}_2\textrm{SO}_4$, the passive current density and critical current density were increased, whereas corrosion potential and break down potential were nearly constant, 2) as the solution temperature increased. the induced time for initiation of crevice corrosion was shortened. 3) The potential range in the crevice was -220mV/SCE to -380mV/SCE according to the distance from the crevice opening, which is lower than that of external surface of -200mV/SCE.

• 한국표면공학회지
• /
• 제26권5호
• /
• pp.263-270
• /
• 1993

The effects of surfactants on electorless copper plating bath for PCB was studied. Basic bath composition was cuplic sulfate 10g/l, EDTA.2Na 40 g/l, formalin$ 3m\ell$/l and sodium hydroxide solution for pH adjust. After addition of accelerators, stabilizers and surfactants, the polarization curves in plating bath were carried out for presumption of the plating rate. From the plating rate in bath with the various concentration of additives, the optimum condition for manufacturing the electroless copper plating bath was confirmed. It was found that the addition of $\alpha$.$\alpha$'-dipyridyl, pyridine and polyxyethylene octylphenylether was good as stabilizer, accelerator and surfactants, respectively. With this additives, the maximum plating rate of $12\mu\textrm{m}$/h at $65^{\circ}C$ and $2\mu\textrm{m}$/h at $25^{\circ}C$ was obtained.

• 열처리공학회지
• /
• 제15권5호
• /
• pp.213-218
• /
• 2002

In order to develop the economic and environmental water-soluble black coloring agent, some adequate chemical mixtures were mixed and this solution was applied to coat quenched and tempered 51B20 steel bolt. Some basic properties of the solution and characteristics of the coated film in addition to the corrosion resistance were investigated. The developed 100 kg of water-soluble black coloring agent solution was a chemical mixture consisted of 10 kg of aqueous coloring agent, 40 kg of surface active agent, 0.3 kg of anti-foam agent and $50{\ell}$ of water. The coated film of the bolt was composed of hard layer of about $2{\mu}m$ and the disbondable soft layer of about $4{\mu}m$ above the hard layer. Many surface active agents peaks and a few hydrophilic peaks were observed in the coated film. Surface roughness value of the coated bolt was lower than that of the non-coated bolt. Corrosion resistance of the coated bolt considerably improved and also relatively showed a good polarization resistance at test condition of $40^{\circ}C$ colorizing temperature and 5% the solution concentration in 3% NaCl anodic polarization test. Initial appearance time of the surface rust was greatly retarded owing to the coated film in salt spray test.

• Journal of Electrochemical Science and Technology
• /
• 제12권4호
• /
• pp.431-439
• /
• 2021

This research work aims to investigate the effect of the aerobic bacterium, Pseudomonas aeruginosa on the mechanical and electrochemical properties of the 316L stainless steel and α-brass. These properties of both the alloys were determined after 7 days of exposure to the controlled and inoculated media at 37℃. The microstructural and electrochemical test results revealed the deleterious effects of Pseudomonas aeruginosa. After exposure to the inoculated medium, the scanning electron microscopy (SEM) results showed the larger pitting and formation of relatively dense biofilm on α-brass compared to 316L stainless steel. The tensile strength and hardness of 316L stainless steel were slightly affected after exposure to the controlled and inoculated media. After exposure to the controlled medium and inoculated media, the tensile strength of the α-brass was least affected but a significant decrease in the hardness (from 165 HV to 124 HV) was observed due to the severe attack induced by the Pseudomonas aeruginosa. Similarly, the open-circuit potential of the 316L stainless steel in the inoculated medium was measured to be less active (-410 mV vs Ag/AgCl) than α-brass (-550 mV vs Ag/AgCl). In the inoculated medium, potentiodynamic polarization curves confirmed the severe attack of Pseudomonas aeruginosa on α-brass (7.15 × 10^-2 mm/year) compared to 316L stainless steel which registered a corrosion rate of 5.14 × 10^-4 mm/year.

• 한국안광학회지
• /
• 제5권1호
• /
• pp.43-48
• /
• 2000

Polarizer와 Analyzer의 Rotation 각에 의해 광의 luminance를 조절할 수 있다. Contrast Sensitivity에 대응한 luminance 값 $L_{max}$, $L_{min}$은 평균 luminance($L_m$)의 회전각 ${\theta}_m$ 최대 진폭과 최소 진폭에 대응하는 회전각 (${\theta}_{max}$, ${\theta}_{min}$)로 부터 구할 수 있다. $$L_{max}=I(0)e^{-2at}{\cdot}cos^2{\theta}_m(1+C_s^{-1})$$ $$L_{min}=I(0)e^{-2at}{\cdot}cos^2{\theta}_m(1-C_s^{-1})$$ 평균 luminance($L_m$)의 회전각 ${\theta}_m$과 측정할 Contrast Sensitivity($C_s$)로부터 polarizer와 analyzer의 회전각(${\theta}_{max}$, ${\theta}_{min}$)을 얻었다. $${\theta}_{max}=cos^{-1}[cos{\theta}_m{\cdot}(1+C_s^{-1})^{1/2}]$$ $${\theta}_{min}=cos^{-1}[cos{\theta}_m{\cdot}(1-C_s^{-1})^{1/2}]$$.

• 한국광학회지
• /
• 제31권5호
• /
• pp.218-222
• /
• 2020

본 연구에서는 편광 유지 광섬유 기반의 고출력 이터븀 첨가 광섬유 증폭기를 이용하여 고품질의 2 kW급 출력을 갖는 파장제어 빔 결합 레이저를 구현하였다. 파장제어 빔 결합을 위하여 광섬유 증폭기의 발진 파장은 각각 1062 nm, 1063 nm, 1064 nm, 1065 nm, 1066 nm로서 서로 다른 값을 갖는다. 협대역 광섬유 레이저 증폭 시 발생하는 유도 브릴루앙 산란 비선형 효과를 완화하기 위해 시드 광원은 유사이진난수 신호(pseudo-random bit sequence, PRBS)를 이용하여 위상 변조된 5 GHz의 협대역 선폭을 갖도록 하였으며 전송광섬유는 30 ㎛ 코어 크기를 가지는 대면적 편광 유지 광섬유를 이용하였다. 파장제어 빔 결합으로 얻은 레이저의 최대 출력은 2.3 kW이며 빔 품질(M²)은 1.74이었다.

• 한국진공학회지
• /
• 제15권1호
• /
• pp.64-72
• /
• 2006

우리는 tris-(8-hydroxyquinoline) aluminum (Alq3)와 같은 단분자 유기물 박막을 사용하여 유기물 발광 소자(OLEDs)를 제작하였다. OLEDs는 ITO가 증착된 유기 기판 위에서 제조되었고, 수명 측정 이후의 OLEDs에 대한 발광, 축전 용량, 유전 손실 특성 등을 측정하였다. 여기서, 수명 측정을 위하여 사용한 인가 전류는 0.5mA 에서 9mA까지 였고, 수명의 인가 전류 의존성은 약 2 mA 부근에서 다르게 관찰되었다. C-V 특성 곡선에서 나타난 축전 용량의 봉우리들은 유기물 내의 분극과 유기물과 금속의 경계에서 나타난 분극의 영향으로 추측된다. 그리고, 2 mA 보다 낮은 전류 하에서 수명 측정 후 발광특성이 저하된 OLEDs에서는 소자 내의 분극 크기의 감소와 전하 유입 장벽의 낮아짐이 같이 관찰되었다.

• 해양환경안전학회지
• /
• 제19권3호
• /
• pp.285-289
• /
• 2013

The coastal area of Republic of Korea is very clean compared to other countries. In this reason, west coastal area of our country is a good place for breeding up a fish such as shrimp. In winter season, the heating system is required for preventing shrimp death caused by freezing in the farm. The heater in the heating system for fishery's farm is operated very severe combating corrosion due to high accumulation by feeding material and high temperature in heated sea water. Almost all manufactured heaters of STS 316L and Ti material are scrapped every year due to heavy corrosion such a general and crevice corrosion. For comparing the general and galvanic corrosion in new heater material, the test material of Zirconium (Zr), Titanium (Ti) and STS 316L are tested by potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), current density-time methods and microscopic examination in a 3.5% NaCl solution. The corrosion potential (Ecor) measured by potentiodynamic polarization for Zr, Ti and STS 316L reveals -198, -250 and -450mV, corrosion current density 0.5, 2.5 and $6.5{\mu}A/cm^2$ respectively. The film resistance measured by EIS are Zr 63,000, Ti 39,700 and 316L $3,150{\Omega}$, and the current of Zr-Ti couple is $0.03{\mu}A$, whereas Zr-316L SS is $0.1{\mu}A$. According to the result of this experiment in 3.5% NaCl solution, Zr is excellent corrosion resistance material than Ti and STS 316L.