• 한국분말재료학회지
• /
• 제27권4호
• /
• pp.311-317
• /
• 2020

In this study, the effects of Co content on the microstructure and Charpy impact properties of Fe-Cr-W ferritic/martensitic oxide dispersion strengthened (F/M ODS) steels are investigated. F/M ODS steels with 0-5 wt% Co are fabricated by mechanical alloying, followed by hot isostatic pressing, hot-rolling, and normalizing/tempering heat treatment. All the steels commonly exhibit two-phase microstructures consisting of ferrite and tempered martensite. The volume fraction of ferrite increases with the increase in the Co content, since the Co element considerably lowers the hardenability of the F/M ODS steel. Despite the lowest volume fraction of tempered martensite, the F/M ODS steel with 5 wt% Co shows the highest micro-Vickers hardness, owing to the solid solution-hardening effect of the alloyed Co. The high hardness of the steel improves the resistance to fracture initiation, thereby resulting in the enhanced fracture initiation energy in a Charpy impact test at - 40℃. Furthermore, the addition of Co suppresses the formation of coarse oxide inclusions in the F/M ODS steel, while simultaneously providing a high resistance to fracture propagation. Owing to these combined effects of Co, the Charpy impact energy of the F/M ODS steel increases gradually with the increase in the Co content.

• Applied Biological Chemistry
• /
• 제18권4호
• /
• pp.194-202
• /
• 1975

이 연구(硏究)는 도시유기폐물(都市有機廢物)을 이용(利用)한 유기질비료(有機質肥料)로서 활성오니(活性汚泥) 및 진개퇴비(塵芥堆肥)를 킬레이트화 물질로서 利用(利用)하기 위(爲)해서 이들 물질(物質)의 특성(特性)을 조사(調査)하였다. 철(鐵)킬레이트화에 관여(關與)하는 수용성물질(水溶性物質)을 분자체 분획법(分劃法)으로 분리(分離)하여 자외선(紫外線)및 적외선분광(赤外線分光) 스펙트럼에 의해서 그 구조(構造)를 조사(調査)하였고 이들 킬레이트의 안정도상수(安定度常數)를 이온교환평형법(交換平衡法)으로 측정(測定)하여 이들을 킬레이트 물질로 사용(使用)하했을때 그 안정성(安定性)을 검사(檢討)하였다. 진개퇴비(塵芥堆肥)에서 추출(抽出)된 유기물질(有機物質)은 Sephadex G-25에 의(依)해 4개분획(個分劃)으로 분리(分離)되었고 이중 철(鐵)과 킬레이트를 이루고 있던 분획(分劃)은 분자량(分子量)이 $5000{\sim}10,000$ 사이에 있었고 Polyphenol구조(構造)의 산소군(酸素群)이 킬레이트화(化)에 관여(關與)하고 있었다. 활성오니중(活性汚泥中) 가용성(可溶性) 물질(物質)은 Sephadex G-25에 의(依)해 6개(個)의 분획(分劃)으로 분리(分離)되었고 이중 킬레이트를 이루고 있던 분획(分劃)은 $5000{\sim}10,000$ 또는 5000에 약간 미달(未達)하는 분자량(分子量)을 가지고 있고 Polypeptide의 amide기(基)가 킬레이트화에 관여(關與)하였다. 이들의 안정도상수(安定度常數)도 합성(合成)킬레이트 물질의 안정도상수(安定度常數)와 큰 차이(差異)가 없을 정도(程度)로 안정(安定)하였다.

• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.391-397
• /
• 2006

The soot yield has been studied by a premixed propane-oxygen-inert gas combustion in a specially designed disk-type constant-volume combustion chamber to investigate the effect of pressure, temperature and turbulence on soot formation. Premixtures are simultaneously ignited by eight spark plugs located on the circumference of chamber at 45 degrees intervals in order to observe the soot formation under high temperature and high pressure. The eight converged flames compress the end gases to a high pressure. The laser schlieren and direct flame photographs with observation area of 10 mm in diameter are taken to examine the behaviors of flame front and gas flow in laminar and turbulent combustion. The soot volume fraction in the chamber center during the final stage of combustion at the highest pressure is measured by the in-situ laser extinction technique and simultaneously the corresponding burnt gas temperature by the two-color pyrometry method. The changes of pressure and temperature during soot formation are controlled by varying the initial charging pressure and the volume fraction of inert gas compositions, respectively. It is found that the soot yield increases with dropping the temperature and raising the pressure at a constant equivalence ratio, and the soot yield in turbulent combustion decreases as compared with that in laminar combustion because the burnt gas temperature increases with the drop of heat loss for laminar combustion.

• 한국자기공명학회논문지
• /
• 제9권1호
• /
• pp.21-28
• /
• 2005

$^{11}B$ nuclear magnetic resonance (NMR) measurements have been performed to investigate electronic structures and vortex states of $M_gB_2$ superconductor. The central transition shows a narrow peak down to 25 K at 3.15 T. Below 25 K, an extra line starts to show up and dominates. The extra line is broad and asymmetric with a long tail in the high frequency side, which confirms that this originates from vortex pinning below the irreversibility temperature. From temperature evolution of the fraction and linewidth of the broad portion, temperature dependence of coherence length and penetration depth are extracted.

• 한국분말재료학회지
• /
• 제7권3호
• /
• pp.131-136
• /
• 2000

The effect of tempering temperature on the three point bending fatigue behavior of a P/M high speed steel JYPS-23 (1.28% C, 4.20% Cr, 6.40% W, 5.00% Mo, 3.10% V, bal. Fe) was investigated. The number of cycles to failure of the specimen austenitized at $1175^{\circ}C$ drastically increased with increasing tempering temperature. As tempering temperature increased from 500 to $620^{\circ}C$, the volume fraction and average size of carbides (MC or M6C) did not significantly changed, while hardness decreased drastically. The reduced hardness is due to the softening of matrix, which increased the resistance of the fatigue crack propagation. For a practical application, powder compacting test were also conducted with the P/M high speed steel punches tempered at 500, 580, and $620^{\circ}C$. The number of compacting cycles to failure of the punches also increased with increasing tempering temperature.

• 공업화학
• /
• 제21권5호
• /
• pp.488-494
• /
• 2010

W/O 에멀젼법하에 homogenizer를 사용하여 ${\alpha}$-알루미나 분체 제조 시 O : W 부피비, 교반속도, 계면활성제 사용량과 조성 및 종류 등의 변화에 의하여 분체의 입자형상, 응집성, 평균입경과 입도분포 등의 변화를 분석하였다. 계면활성제는 비이온 계면활성제가 사용되었고 단일 및 혼합계면활성제로는 SP80 및 [SP80 & TW80]을 사용하였고 보조계면활성제로는 n-부탄올을 사용하였다. SP80을 사용하였을 경우, 분체의 입자형상은 구형에 근접하였고 평균입경은 주어진 O : W 부피비 변화 및 16000 rpm 이상의 교반속도에서 큰 차이를 보이지 않았다. [SP80 & TW80]을 사용하였을 경우, 구형에 가까운 분체의 입자간 응집 및 합체현상은 $HLB_m$ = 5일 때 낮았고 평균입경은 단일계면활성제를 사용하였을 때 비하여 다소 감소하였다. $HLB_m$ = 5인 [SP80 & TW80]와 함께 0.1 vol% n-부탄올을 사용하였을 경우, 입자간 응집성이 상대적으로 낮고 나노크기의 입도를 갖는 분체 분율을 증가시킬 수 있었다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.169-170
• /
• 1998

In this study, regional variation in vertebral bone density due to osteoporosis were investigated using a method that employs images from QCT. QCT images(1mm thick slices) of the first lumbar vertebra from a normal person (23/M, BMD=139.8mg/ml) and from an osteoporotic patient (54/F, BMD=82.0mg/ml) were obtained. Uniform settings (140kVp, 204mA) were used and images of 300 Hounsfield Unit or greater were selectied to filler out soft tissue interference. To assess the regional variation of the area fraction the vertebral body was divided into 3 layers and each layer contained 9 regions. Area faction was calculated based on image analysis data. Our results showed that the area fraction at the middle of the vertebra was quite lower than the endplate and peripheral regions, but the area fraction values from the osteoporotic patient were uniform throughout the entire height of the vertebral body, which indicates the significant drop of BMD had occurred near both end-plates due to the osteoporosis, especially at the peripheral regions. Our results suggest the susceptability of the vertebrae to compression fracture types in osteoporotic spine.

• 한국재료학회지
• /
• 제26권12호
• /
• pp.751-756
• /
• 2016

Graphite was diffusion-bonded by hot-pressing to W-25Re alloy using a Ti interlayer. For the joining, a uniaxial pressure of 25 MPa was applied at $1600^{\circ}C$ for 2 hrs in an argon atmosphere with a heating rate of $10^{\circ}C\;min^{-1}$. The interfacial microstructure and elemental distribution of the W-25Re/Ti/Graphite joints were analyzed by scanning electron microscopy (SEM). Hot-pressed joints appeared to form a stable interlayer without any micro-cracking, pores, or defects. To investigate the high-temperature stability of the W-25Re/Ti/Graphite joint, an oxy-acetylene torch test was conducted for 30 seconds with oxygen and acetylene at a 1.3:1 ratio. Cross-sectional analysis of the joint was performed to compare the thickness of the oxide layer and its chemical composition. The thickness of W-25Re changed from 250 to $20{\mu}m$. In the elemental analysis, a high fraction of rhenium was detected at the surface oxidation layer of W-25Re, while the W-25Re matrix was found to maintain the initial weight ratio. Tungsten was first reacted with oxygen at a torch temperature over $2500^{\circ}C$ to form a tungsten oxide layer on the surface of W-25Re. Then, the remaining rhenium was subsequently reacted with oxygen to form rhenium oxide. The interfacial microstructure of the Ti-containing interlayer was stable after the torch test at a temperature over $2500^{\circ}C$.

• 한국자기학회지
• /
• 제8권3호
• /
• pp.125-130
• /
• 1998

13Cr-1.5Nb-Fe합금분말이 수분사법으로 제조되엇다. 제조된 합금뷴말을 압축기를 이용하여 ring현상으로 성형한후, 진공중에서 소결하였다. as-prepared 분말의 현상, 입도분포, 성분분석 및 포화자화물 조사하였으며, 소결된 시편의 투자율, 교류자기이력손실이 조사되었다. as-prepared 13Cr-1.5Nb-Fe합금분말의 포화자화는 160emu/g이었으며, 산소함유량은 약 600ppm이었다. 입도분포는 약 70$\mu$m에서 50%vol.을 나타낸다. 교류투자율은 소결온도 및 성형온도가 증가할수록 증가한다. 주파수 20KHz에서 교류자기이력손실은 12ton/cm2성령압력 및 120$0^{\circ}C$ 소결온도 조건에서 107W/cc로 가장우수하다.

• 한국가시화정보학회지
• /
• 제22권1호
• /
• pp.6-17
• /
• 2024

This study examined the natural convection heat flow characteristics of the melting process of PCM (palm oil) inside a liquid flexitank(bag) for a cargo container. A film heating element was installed on the bottom of the container, and numerical analysis was performed under heat flux conditions of 1,000 to 4,000 W/m². As a result, the melt interface of the PCM rises to a nearly horizontal state over time. In the initial stage, conduction heat transfer dominates, but gradually waves at the cell flow and melt interfaces are formed due to natural convection heat transfer. As melting progresses, the Ra number increases parabolically, and the Nu number increases linearly and has a constant value. The Nu number rises slowly under low heat flux conditions, whereas under high heat flux conditions, the Nu number rises rapidly. As the heat flux increases, the internal temperature oscillation of the liquid phase after melting increases. However, under high heat flux conditions, excess heat exceeding the latent heat is generated, and the temperature of the molten liquid is raised, so the increase in melting rate decreases. Therefore, the appropriate heating element specification applied to a 20-ton palm oil container is 2,000 W/m².