References
- Bae, M. W. (1989). A Study on Soot Formation in Pre- Mixed Combustion at High Pressures. Ph. D. Dissertation. Tokyo Institute of Technology, 1−168. Japan
- Bae, M. W. (1999). A study on the measurement of burnt gas temperature in premixed combustion by modified two-color method. Trans. Korean Society of Automotive Engineers 7, 8, 43-54
- Bae, M. W. (2001). A study on soot formation of turbulent premixed propane flames in a constant-volume combustor at high temperatures and high pressures. Trans. Korean Society of Automotive Engineers 9, 4, 1-9
- Bae, M. W. and Kamimoto, T. (1995). Soot formation rate in premixed combustion at high pressures. High- Speed Photography and Photonics, Int. Society for Optical Engineering 2513, 1, 463-471
- Dalzell, W. H. and Sarofim, A. F. (1969). Optical constants of soot and their application to heat flux calculations. Trans. ASME, J. Heat Transfer, 91, 100-104 https://doi.org/10.1115/1.3580063
- Hamamoto, Y., Tomita, E. and Izumi, M. (1987). The effect of swirl on the combustion of a homogeneous mixture in a closed vessel. Trans. JSME(B) 53, 488, 1395-1402 https://doi.org/10.1299/kikaib.53.1395
- Kamimoto, T., Bae, M. W. and Kobayashi, H. (1989). A study on soot formation in premixed constant-volume propane combustion. Combustion and Flame, 75, 221-228 https://doi.org/10.1016/0010-2180(89)90039-4
- Kazakov, A. and Frenklach, M. (1998). Dynamic modeling of soot particle coagulation and aggregation: Implementation with the method of moments and application to high-pressure laminar premixed flames. Combustion and Flame, 114, 484-501 https://doi.org/10.1016/S0010-2180(97)00322-2
- Kennedy, I. M. (1997). Models of soot formation and oxidation. Prog. Energy Combustion Sci., 23, 95-132 https://doi.org/10.1016/S0360-1285(97)00007-5
- Kim, H., Lee, S., Kim, J., Cho, G., Sung, N. and Jeong, Y. (2005). Measurement of size distribution of diesel particles: Effects of instruments, dilution methods, and measuring positions. Int. J. Automotive Technology 6, 2, 119-124
- Koylu, U. O., Mcenally, C. S., Rosner, D. E. and Pfefferle, L. D. (1997). Simultaneous measurements of soot volume fraction and particle size/microstructure in flames using a thermophoretic sampling technique. Combustion and Flame, 110, 494-507 https://doi.org/10.1016/S0010-2180(97)00089-8
- Li, X. and Wallace, J. S. (1995). In-cylinder measurement of temperature and soot concentration using the twocolor method. SAE Paper No. 950848, 147−157
- MacFarlane, J. J., Holderness, F. H. and Whitcher, F. S. (1964). Soot formation rates in premixed C5- and C6- Hydro-carbon air flames at pressures up to 20 atmospheres. Combustion and Flame, 8, 215-229 https://doi.org/10.1016/0010-2180(64)90067-7
- Matsui, H., Kamimoto T. and Matsuoka, S. (1983). Formation and oxidation processes of soot particu-late in a D. I. diesel engine - An experimental study via the two-color method. SAE Paper No. 820464, 1923−1935
-
Matzing, H. and Wagner, H. G. (1986). Measurements about the influence of pressure on carbon formation in premixed laminar
$C_{2}H_{4}$ -air flames. 21st Symp. (Int.) Combustion, The Combustion Institute, 1047−1055 - Park, C. and Appleton, J. P. (1973). Shock-tube measurements of soot oxidation rates. Combustion and Flame, 20, 369-379 https://doi.org/10.1016/0010-2180(73)90029-1