• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.236-238
• /
• 1997

A cellular power amplifier using an APCVD(Atmospheric Pressure Chemical Vapor Deposition)-grown SiGe base HBT of ETRI has been designed with a linear simulation CAD. The Si/SiGe HBT with an emitter area of 2$\times$8${\mu}{\textrm}{m}$$^2$typically has a cutoff frequency(f$_{T}$) of 7.0 GHz and a maximum oscillation frequency(f$_{max}$) of 16.1 GHz with a pad de-embedding A packaged power Si/SiGe HBT with an emitter area of 2$\times$8$\times$80${\mu}{\textrm}{m}$$^2$typically shows a f$_{T}$ of 4.7 GHz and a f$_{max}$ of 7.1 GHz at a collector current (Ic) of 115 mA. The power amplifier exhibits a Forward transmission coefficient(S21) of 13.5 dB, an input and an output reflection coefficients of -42 dB and -45 dB respectively. Up to now the III-V compound semiconductor devices hale dominated microwave applications, however a rapid progress in Si-based technology make the advent of the Si/SiGe HBT which is promising in low to even higher microwave range because of lower cost and relatively higher reproducibility of a Si-based process.ess.ess.

• 한국정밀공학회지
• /
• 제3권2호
• /
• pp.62-75
• /
• 1986

An experimental investigation of the machining characteristics such as cutt- ing resistance, surface roughness and tool wear in turning the test pieces of SM45C steel with both coated and uncoated carbide tool tips under various cutting conditions was conducted. Also a specially designed simple vibration damping device was experimentally evaluated for its effectiveness on machined surface roughness and a vibration test was conducted to confirm its ability to reduce the amplitude. Based on these tests finding, the following conclusions are made; 1. The cutting resistance($\textrm{p}_{1}$) increases as the depth of cut(d) increases at fixed feed rate(f) over the cutting speed(v) range of 43-226 m/min and p decreses about 18% average when V is increased for fixed d and f. At V= 226m/min, $\textrm{p}_{1}$/for A, C tips are about the same level but $\textrm{p}_{1}$ for B tip is 15% less than A, C tips. 2. The specific cutting resistance(Ks) at V=226 m/min was derived for A, B, C tips respectively and the value of Ks for B rip is about 20% less than A, C tips. 3. The surface roughness(Ra) improves significantly as the cutting speed(V) is increased and this effect was greater when V>100 m/min. On the other hand, Ra deteriorates as the feed rate(f) is increased and this trend was accelerated when f>0.3 mm/rev. With regard to the difference of Ra values among A, B, C tips, at V=226m/min, d=0.4mm, and f=0.31-0.61mm/rev, Ra values for B.C tips are about 17% less than tip A. 4. The experimental tool wear equations were derived for A, B, C tips and from these equations, the tool life($\textrm{T}_{\textrm{L}}$) baced on the I.S.O. criteria was calculated to be $\textrm{T}_{\textrm{L}}$<$\textrm{T}_{\textrm{LB}}$<$\textrm{T}_{\textrm{LC}}$ for both flank wear($\textrm{V}_{\textrm{B}}$) and boundary wear($\textrm{V}_{\textrm{N}}$). Hence, the coated tips are superior to the uncoated tip and tip C is considered to be the best. 5. The cutting resistance may be slightly reduced and the surface rounghness improved when the damper is used especially when V>100 m/min. Therefore this damping device is considered to be effective and practical. The experimental surface roughness equations were also derived. Based on the vibration test, it is established that the surface roughness improvement was the result of amplitude reduction made possible by the damper.

• 한국전자파학회논문지
• /
• 제17권7호
• /
• pp.659-664
• /
• 2006

본 논문에서는 $0.12{\mu}m$ 게이트 전극을 가진 metamorphic InAIAs/InGaAs high electron-mobility transistors (mHEMT)를 이용하여 제작된 60 GHz push-push 발진기의 특성을 고찰하였다. 전극 길이가 $0.12{\mu}m$ 인 mHEMT는 700 mA/mm의 최대 전류, 600 mS/mm의 최대 전달정수, 170 GHz $f_T$, 그리고 300 GHz 이상의 $f_{MAX}$ 등 우수한 특성을 나타내었다. 두 개의 $6{\times}50{\mu}m$ 크기를 가지는 mHEMT 를 이용하여 제작된 발진기는 59.5 GHz 에서 6.3 dBm의 출력 전력과 -35 dBc 이상의 기저 주파수 억압도를 나타내었다. 페이즈 노이즈 (phase noise)는 발진 주파수의 1 MHz 오프셋에서 -81.2 dBc/Hz 의 특성을 나타내었다. 본 연구 결과는 60 GHz 대역에서 mHEMT를 이용하여 제작된 push-push 발진기로는 최대 출력을 나타낸 결과이며, 이 연구 결과는 상용화와 저가격에 InP HEMT 보다 유리한 mHEMT를 이용하여 고출력 발진기 특성을 얻을 수 있음을 보여준다.

• Journal of applied mathematics & informatics
• /
• 제18권1_2호
• /
• pp.25-43
• /
• 2005

Let F be a finite field of prime power order q(odd) and the multiplicative order of q modulo $2^{n}\;(n>1)\;be\; {\phi}(2^{n})/2$. If n > 3, then q is odd number(prime or prime power) of the form $8m{\pm}3$. If q = 8m - 3, then the ring $R_{2^n} = F[x]/ < x^{2^n}-1 >$ has 2n primitive idempotents. The explicit expressions for these primitive idempotents are obtained and the minimal QR cyclic codes of length $2^{n}$ generated by these idempotents are completely described. If q = 8m + 3 then the expressions for the 2n - 1 primitive idempotents of $R_{2^n}$ are obtained. The generating polynomials and the upper bounds of the minimum distance of minimal QR cyclic codes generated by these 2n-1 idempotents are also obtained. The case n = 2,3 is dealt separately.

• Journal of Microbiology
• /
• 제39권3호
• /
• pp.236-239
• /
• 2001

Group A Streptococcus strain ST4529 is a provisional new ems type which has been recently reported in Malaysia (Jomal, et al. 1999. Energ. Infect . Dis. 5,10-14). This strain was found to be opacity factor (OF) negative with a Tl phenotype. Usually, OF negative strains with T1 phenotypes are associated with acute rheumatic fever. However, strain ST4529 was isolated from the blood of a patient with septicemia. Comparison of the deduced amino acid sequence of the mature hypervariable N-terminus of ST4529 showed only 43% identity with that of M5, the closest matched OF negative strain with a T1 phenotype. Thus, ST4529 most probably encodes a new serospecifically unique M protein which is associated with septicemia rather than pharyngitis infections. The strains with these phenotypes are very important because their sequences should be considered for developing any anti-streptococcal vaccines.

• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.42-48
• /
• 2006

The aim of this work is to develop Thick-Thin polyester yarn(T-T yarn) with finer than 1 denier mono filament. The manufacture of T-T yarns were carried out in a draw-winder using 85d/72f PET filament with various spinning speed of 2700, 2900, and 3100 m/min, respectively. The structure and physical properties of T-T yarns with spinning speed and over feed ratio were examined by draw-winder processing the sample in $100^{\circ}C$ water for 20 min and drying in 120, 140, 160, and $180^{\circ}C$ of dry air for 20 min. The crystallinity, the birefringence and the initial elasticity modulus of T-T yarns increased with increased spinning speed of filament and the heat treatment temperature but at the temperatures higher than $140^{\circ}C$ the increased rates show a tendency to decrease. Moreover, the initial modulus and the tenacity of T-T yarns increased with decreasing the over feed ratio of filament and the those of T-T yarns decreases with increasing the heat treatment temperature. The shrinkage of T-T yarns decreased with decreasing spinning speed and increased over feed ratio of filaments. Consequently, the results indicate that the best T-T yarn under 1 denier was optimized from PET filament with spinning speed of 2700 m/min and over feed ratio of 0.67

• Asian-Australasian Journal of Animal Sciences
• /
• 제2권3호
• /
• pp.237-238
• /
• 1989

• Journal of applied mathematics & informatics
• /
• 제10권1_2호
• /
• pp.75-81
• /
• 2002

Lipschitz stability and Lipschitz ø$_{o}$ - equistability of the functional differential equation x'= B(x)f(t, x, $x_{t}$), $x_{to}$ =$\theta$$_{o}$ are discussed. Sufficient conditions are given using the comparison with the corresponding scalar equation.ion.n.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.339-342
• /
• 2003

Main PDP panel efficacy improvement factors are discussed. A large panel efficacy improvement can be obtained through a combination of discharge efficiency improvement and phosphor improvement. Important design elements are a high Xe-content gas mixture, the application of a $TiO_2-layer$, and a new green phosphor with little saturation at high VUV-load. In a 4-inch color test panel with a conventional stripe-type cell configuration a white efficacy of 4.4 lm/W and a luminance of 5000 $cd/m^2$ is obtained for sustaining at 250V in addressed condition.

• 대한수학회보
• /
• 제49권3호
• /
• pp.455-463
• /
• 2012

In this paper, by using degree theory, we consider a kind of higher-order Li$\acute{e}$enard type $p$-Laplacian differential equation as follows $$({\phi}_p(x^{(m)}))^{(m)}+f(x)x^{\prime}+g(t,x)=e(t)$$. Some new results on the existence of anti-periodic solutions for above equation are obtained.