• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.15-33
• /
• 2021

In this study, the possibility of discriminating Fire blight (FB) infection tested using the hyperspectral imagery. The reflectance of healthy and infected leaves and branches was acquired with 5 nm of full width at high maximum (FWHM) and then it was standardized to 10 nm, 25 nm, 50 nm, and 80 nm of FWHM. The standardized samples were divided into training and test sets at ratios of 7:3, 5:5 and 3:7 to find the optimal bands of FWHM by the decision tree analysis. Classification accuracy was evaluated using overall accuracy (OA) and kappa coefficient (KC). The hyperspectral reflectance of infected leaves and branches was significantly lower than those of healthy green, red-edge (RE) and near infrared (NIR) regions. The bands selected for the first node were generally 750 and 800 nm; these were used to identify the infection of leaves and branches, respectively. The accuracy of the classifier was higher in the 7:3 ratio. Four bands with 50 nm of FWHM (450, 650, 750, and 950 nm) might be reasonable because the difference in the recalculated accuracy between 8 bands with 10 nm of FWHM (440, 580, 640, 660, 680, 710, 730, and 740 nm) and 4 bands was only 1.8% for OA and 4.1% for KC, respectively. Finally, adding two bands (550 nm and 800 nm with 25 nm of FWHM) in four bands with 50 nm of FWHM have been proposed to improve the usability of multispectral image sensors with performing various roles in agriculture as well as detecting FB with other combinations of spectral bands.

• Journal of Chest Surgery
• /
• v.55 no.2
• /
• pp.126-142
• /
• 2022

Background: Thymic epithelial tumors (TETs) are rare, and information regarding their surgical outcomes and prognostic factors has rapidly changed in the past few decades. We analyzed surgical treatment practices for TETs and outcomes in terms of overall survival (OS) and freedom from recurrence (FFR) during a 13-year period in Korea. Methods: In total, 1,298 patients with surgically resected TETs between 2000 and 2013 were enrolled retrospectively. OS and FFR were calculated using the Kaplan-Meier method and evaluated with the log-rank test. Prognostic factors for OS and FFR were analyzed with multivariable Cox regression. Results: A total of 1,098 patients were diagnosed with thymoma, and 200 patients were diagnosed with thymic carcinoma. Over the study period, the total number of patients with surgically treated TETs and the proportion of patients who underwent minimally invasive thymic surgery (MITS) increased annually. The 5-year and 10-year survival rates of surgically treated TETs were 91.0% and 82.1%, respectively. The 5-year and 10-year recurrence rates were 86.3% and 80.0%, respectively. The outcomes of surgically treated TETs improved over time. Multivariable Cox hazards analysis for OS, age, tumor size, and Masaoka-Koga stage were independent predictors of prognosis. The World Health Organization classification and tumor-node-metastasis (TNM) staging were also related to the prognosis of TETs. Conclusion: Surgical treatment of TETs achieved a good prognosis with a recent increase in MITS. The M-K stage was the most important prognostic factor for OS and FFR. The new TNM stage could also be an effective predictor of the outcomes of TETs.

• Journal of Nutrition and Health
• /
• v.55 no.6
• /
• pp.642-655
• /
• 2022

Purpose: We examined the effects of the 8-week moderate-intensity Pilates exercise program on body composition, balance ability, metabolic parameters, arterial condition, and eating habits among overweight and obese women. Methods: From the general sample of overweight or obese Korean women (body mass index ≥ 23 kg/m² ), those who had not been diagnosed with any chronic degenerative diseases were enrolled in the study (n = 39). After 8 weeks of the Pilates exercise program, the participants were subdivided into adherence and non-adherence groups. Among the study participants, 24 women were matched for age and menopausal status to reduce the bias, and then finally included for the comparison (Pilates-adherence, n = 12; Pilates-non-adherence, n = 12). Results: The body balance measured by the Y-balance test, body mass index, and subcutaneous fat areas were significantly improved in both groups. However, the Pilate-sadherence group showed more positive changes in body balance and had significant improvement in body composition parameters such as waist size, visceral fat area, systolic blood pressure, arterial aging index, fasting blood glucose, and glycated hemoglobin than the Pilates-non-adherence group. In addition, the nutrition quotient for Korean adults (balance, moderation, and behavior except diversity) were significantly improved in both groups after dietary education. However, the participants did not show dramatic improvement in the metabolic parameters, because all the study subjects were in relatively good health and did not have any diagnosed diseases. Conclusion: This study demonstrated that higher adherence to the Pilates exercise program together with a modification of eating habits may effectively improve body balance, body composition, and obesity-related parameters among overweight and obese women.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.4
• /
• pp.350-359
• /
• 1993

The effect of gibberellic acid ($GA_3) and abscisic acid (ABA) on KCl-enhanced proteolysis of senescing leaves of rice(Oryza sativa L. cv. Chilsung) was studied. Emphasis was given to their effects on KCI-enhanced efflux of amino acids and proteinase activity. When treated singly, $GA_3 affected leaf proteolysis little, while ABA increased proteolysis, the rate of amino acid efflux, and ribulose -1,5 -bisphosphate carboxylase / oxygenase (Rubisco)-degrading endoproteinase activity. An additive increase in all three parameters mentioned above was observed when leaves were treated with ABA and KCl. No such an additive effect was found when $GA_3 was treated with KCl. Both $GA_3 and ABA helped to alleviate the KCI-suppressed activity of Rubisco-degrading exoproteinases. The additive increase in proteolysis of rice leaves in the presence of both ABA and KCl could thus be ascribed to a further increase in the efflux of protein hydrolyzates and Rubisco-degrading endoproteinase activity. An increase in proteolysis was accompanied by a decrease in water absorption, and the combined treatment of ABA with KCl resulted in a further reduction of water absorption.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.

• Korean journal of health promotion
• /
• v.19 no.2
• /
• pp.91-95
• /
• 2019

Background: Obesity and deterioration of pulmonary function are known to increase all-cause mortality and morbidity associated with chronic diseases. Obesity is a known risk factor for decreasing pulmonary function; however, studies on the effect of changes in body weight or body mass index (BMI) on pulmonary function are rare. This study aimed to investigate the relationship between the change in body weight or BMI and the pulmonary function test (PFT) in Koreans who underwent consecutive screening at a health promotion center. Methods: We enrolled 5,032 patients who underwent consecutive screening health check-ups at a health promotion center in 2015 and 2017. The BMI was calculated as the body weight (kg) divided by the square of the height (m²) in 2015 and 2017. We analyzed the association between the change in body weight or BMI and PFT. Results: In males, PFT and changes in body weight were associated with forced expiratory volume in 1 second (FEV₁) but not with changes in BMI. In females, FEV₁/forced vital capacity and forced expiratory flow between 25-75% of vital capacity (FEF_25-75%) were significantly associated with the changes in body weight and BMI. A correlation analysis between body weight and BMI showed a negative correlation with FEF_25-75% in males. In females, FEV₁/FVC and FEF_25-75% were negatively correlated. Conclusions: We observed that the increase in body weight and BMI was significantly associated with pulmonary function. This finding suggests that careful monitoring of body weight and BMI may aid in maintaining proper pulmonary function, thereby, reducing mortality and morbidity.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.343-352
• /
• 2007

The present study aims to investigate the design standard for acoustic criteria of Korean traditional music which could be used for the design of Korean traditional music halls. In order to do this, subjective listening tests were undertaken to musicians using auralized sounds which were convolved with the impulse response of traditional instruments recorded in an anechoic chamber. 94 pairs of sound were made which have different value of acoustic parameters including RT, BR, Brilliance, G, C80, ITDG, IACC. A paired comparison method(PCM) was used to analyze the results from the subjective listening tests. The results show that the preference of acoustic criteria for the Korean traditional music is far different from those of western music. As a result, specific range of acoustic criteria were suggested for the appropriate acoustic conditions of Korean traditional music. Also, a guideline of the acoustic design of halls for performing the Korean traditional music was suggested which could be used as a basic reference in the future works.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1501-1512
• /
• 2024

Plasma disruption in tokamak experiments is a challenging issue that causes damage to the device. Reliable prediction methods are needed, but the lack of full understanding of plasma disruption limits the effectiveness of physics-driven methods. Data-driven methods based on supervised learning are commonly used, and they rely on labelled training data. However, manual labelling of disruption precursors is a time-consuming and challenging task, as some precursors are difficult to accurately identify. The mainstream labelling methods assume that the precursor onset occurs at a fixed time before disruption, which leads to mislabeled samples and suboptimal prediction performance. In this paper, we present disruption prediction methods based on anomaly detection to address these issues, demonstrating good prediction performance on J-TEXT and EAST. By evaluating precursor onset times using different anomaly detection algorithms, it is found that labelling methods can be improved since the onset times of different shots are not necessarily the same. The study optimizes precursor labelling using the onset times inferred by the anomaly detection predictor and test the optimized labels on supervised learning disruption predictors. The results on J-TEXT and EAST show that the models trained on the optimized labels outperform those trained on fixed onset time labels.

• Journal of Food Hygiene and Safety
• /
• v.39 no.4
• /
• pp.304-311
• /
• 2024

The present study aimed to compare the accuracy of the compact dry and culture plate methods for natural flora (yeasts/molds, coliforms, and total bacterial count) and artificial inoculum (Escherichia coli) in dosirak (meat-based), meal kits (seafood-based), and Doenjang (traditional food). Compact dry TC, EC, CF, and YMR were compared with culture plate methods using a suitable medium for each bacterium. The total bacterial count, coliforms, yeasts/molds, and E. coli were assessed with 3M Petrifilm (aerobic bacterial, coliform, yeast/mold, and E. coli count plates) using culture plate methods. Analysis of the recovery rates of target microorganisms in the three food samples showed that the compact dry method for total bacteria, coliforms, and E. coli exhibited recovery capabilities equivalent to those of the culture plate and Petrifilm methods, with no significant differences (P>0.05). Overall, compact dry TC, CF, and EC showed a good correlation between the methods used in this study, indicating rapid and convenient microbial enumeration by saving time and requiring less space.

• Economic and Environmental Geology
• /
• v.5 no.4
• /
• pp.187-209
• /
• 1972

Drilling position is one of the most important factors affecting on the blasting effects. There has been many reports on several blasting factors of burn-cut by Messrs. Brown and Cook, but in this study the author tried to compare drilling positions of burn-cut to pyramid-cut, and also to correlate burn-cut effects of drilling patterns, not being dealt by Prof. Ito in his theory, which emphasized on dynamical stress analysis between explosion and free face. According to former theories, there break out additional tensile stress reflected at the free face supplemented to primary compressive stress on the blasting with one-free-face. But with these experimented new drilling patterns of burn-cut, more free faces and nearer distance of each drilling holes make blasting effects greater than any other methods. To promote the above explosive effect rationary, it has to be considered two important categories under-mentioned. First, unloaded hole in the key holes should be drilled in wider diameter possibly so that it breaks out greater stress relief. Second, key holes possibly should have closer distances each other to result clean blasting. These two important factors derived from experiments with, theories of that the larger the dia of the unloaded hole, it can be allowed wider secondary free faces and closes distances of each holes make more developed stress relief, between loaded and unloaded holes. It was suggested that most ideal distance between holes is about 4 clearance in U. S. A., but the author, according to the experiments, it results that the less distance allow, the more effective blasting with increased broken rock volume and longer drifted length can be accomplished. Developed large hole burn-cut method aimed to increase drifting length technically under the above considerations, and progressive success resulted to achieve maximum 7 blasting cycles per day with 3.1m drifting length per cycle. This achievement originated high-speed-drifting works, and it was also proven that application of Metallic AN-FO on large hole burn-cut method overcomes resistance of one-free-face. AN-FO which was favored with low price and safety handling is the mixture of the fertilizer or industrial Ammonium-Nitrate and fuel oil, and it is also experienced that it shows insensible property before the initiation, but once it is initiated by the booster, it has equal explosive power of Ammonium Nitrate Explosives (ANE). There was many reports about AN-FO. On AN-FO mixing ratio, according to these experiments, prowdered AN-FO, 93.5 : 6.5 and prilled AN-FO 94 : 6, are the best ratios. Detonation, shock, and friction sensities are all more insensitive than any other explosives. Residual gas is not toxic, too. On initation and propagation of the detonation test, prilled AN-FO is more effective than powered AN-FO. AN-FO has the best explosion power at 7 days elapsed after it has mixed. While AN-FO was used at open pit in past years prior to other conditions, the author developed new improved explosives, Metallic AN-FO and Underwater explosive, based on the experiments of these fundmental characteristics by study on its usage utilizing AN-FO. Metallic AN-FO is the mixture of AN-FO and Al, Fe-Si powder, and Underwater explosive is made from usual explosive and AN-FO. The explanations about them are described in the other paper. In this study, it is confirmed that the blasting effects of utilizing AN-FO explosives are very good.