• Journal of Plant Biology
• /
• v.16 no.3_4
• /
• pp.17-34
• /
• 1973

The physico-chemical factors, the distribution of chlorophyll and the primary production of the lakes Hwajinpo, Yongrangho, Chunchonho, Uiamho, Soyangho and Changjamot have been studied in order to make ecological comparison among these lakes during summer stagnation period of August to September of 1973. On the basis of the characteristics of these lakes, the lake types have been discussed. Thermocline is observed at 3-4m zone in the lake Changjamot and 4-5m zone in the lake Yongrangho. In the case of lake Hwajinpo and impoundments, the distinct thermal stratification is not observed at the summer stagnation period. As to vertical distribution of dissolved oxygen, a positive heterograde curve is obtained in the lakes Hwajinpo and Yongrangho. In the lake Changjamot the typical clinograde curve and the oxygen depletion in hypolimnion are observed. In the case of impoundments, however, the orthograde curve is observed in the lakes Chunchonho and Uiamho. While in the lake Soyangho, any stratification of the disssolved oxygen is not found. In the brackish lakes, such as lakes Hwajinpo and Yongragho, the salinity of hypolimnion is found to be much higher than that of epilimnion. In the lake Hwajinpo, the salinity of hypolimnion is exhibited 32.7$\textperthousand$, which is nearly the same as sea water. The distribution of nitrogenous compounds and phosphates is found to be high in the lake Changjmot. The silicate is also found in high concentration in the lake Chunchonho, and the distribution of nutrients in the brackish lakes is generally low. As to the vertical distribution of chlorophyll level, the lake Changjamot shows a stratum type and the brackish lakes L-type stratification. In the impoundments, lakes Chunchonho and Uiamho appear to be homogeneous type. Seasonal variation of chlorophyll level in the lake Changjamot is examined from January to September 1973. The vertical distribution of chlorophyll during the period of circulation from January to April is homogeneous type and is stratum type thereafter. The maximum chlorophyll level is 277.4mg/$m^2$ on June 23 and the pattern of seasonal variation of chlorophyll level is comparable to the type of eutrophy. The horizontal distribution of chlorophyll level is studied in the brackish lakes, Hwajinpo and Yongrangho. The pattern of distribution is found to be an irregular type. On the basis of measurements of primary production by means of the carbon-14 method and the distribution of chlorophyll level, it is concluded that the interior part of the lake Hwajinpo and Changjamot are eutrophic and the exterior part of the lake Hwajinpo, lake Yongrangho and the impoundments, lake Uiambo and Soyangho are mesotrophic.

• Tribology and Lubricants
• /
• v.31 no.2
• /
• pp.50-55
• /
• 2015

This study investigates the effects of a pattern of 200 μm dimples in a hexagonal array on tribological characteristics. A textured surface might reduce the friction coefficient and wear caused by third-body abrasion and thus improve the tribological performance. There are three friction conditions based on the Stribeck curve: boundary friction, mixed friction, and fluid friction conditions. In this experiment, we investigate the friction characteristics by carrying out the friction tests at sliding speeds ranging from 0.06 to 0.34 m/s and normal load ranging from 10 to 100 N. We create dimple surfaces for texturing by using the photolithography method. There are three kinds of specimens with different dimple densities ranging from 10% to 30%. The dimple density on the surface area is the one of the important factors affecting friction characteristics. Friction coefficient generally decreases with an increase in the velocity and load, indicating that the lubrication regime changes depending on the load and velocity. The fluid friction regime is fully developed, as indicated by the duty number graph. Fluid friction occurs at a velocity of 0.14-0.26 m/s. The best performance is seen at 10% dimple density and 200 μm dimple circle in the hexagonal array.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.1
• /
• pp.47-54
• /
• 2019

An experimental study was conducted on the wear and friction responses in sliding tests of a micro-textured surface on laser pattern (LP) steel as reduction gear material in electric guided vehicle. In this research, the friction characteristics of laser pattern steel under different micro texture density conditions were investigated. The friction tests were carried out at sliding speeds of 0.06 m/s to 0.34 m/s and at normal loads of 2 to 10 N. Photolithography method was used to create the dimples for surface texturing purpose. Four different specimens having different dimple densities of 10%, 12.5%, 15%, and 20% were observed respectively. In this research, friction conditions as shown in Stribeck curve were investigated. Furthermore, the microscopic surface was observed using scanning electron microscope. It was found that the dimple density had a significant role on the friction characteristics of laser pattern steel conditioned as reduction gear material in an agricultural vehicle. The duty number showed that the friction condition was hydrodynamic regime. The best performance was obtained from 12.5% dimple density with lowest friction coefficient achieved at 0.018771 under the velocity of 0.34 m/s and 10N load.

• Reproductive and Developmental Biology
• /
• v.30 no.2
• /
• pp.75-79
• /
• 2006

The developmental regulation of the preimplantation mammalian embryos is a fundamental step for preparing the implantation and it may be regulated by several autocrine and paracrine factors including platelet-activating factor. PAF improved the embryonic survival and implantation but its role during blastocyst development is still largely unknown. In this study, the effects and the possible pathway of PAF on developmental regulation of blastocyst to hatching stage were investigated. Developmental pattern in hatching embryo was a concentration-response curve showing maximal activity at 1 nM PAF, with decreasing activity at higher concentrations. $50{\mu}M$ 1-(5-isoquinolimnesulfonyl)-2-methylpiperazinme dihydrochloride (H-7), a PKC inhibitor, inhibited the progression of blastocyst to hatching embryo. In addition H-7 blocked the PAF effects on the blastocyst development. Besides tetradecanoylphorbol acetate (TPA), a PKC activator stimulated development of blastocyst to the hatching stage. These finding revealed that PAF support the blastocyst development to the hatching embryo. Also it is suggested that PAF action pathways in hatching supporting include the PKC signaling pathway.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.2
• /
• pp.63-73
• /
• 2011

The Pseudorange Corrections (PRC), which are used in DGPS as calibration messages, can contain outliers, noise, and anomalies, and these abnormal events are unpredictable. When those irregular PRC are used, the positioning error gets higher. In this paper, we propose a strategy of detecting and correcting outliers, noise, and anomalies by modeling the changing pattern of PRC through polynomial curve fitting techniques. To validate our strategy, we compared positioning errors obtained without PRC calibation with those with PRC calibration. As a result, we found that our algorithm performs very well; the horizontal RMS error was 3.84 m before the correction and 1.49 m after the correction.

• Progress in Medical Physics
• /
• v.25 no.3
• /
• pp.157-166
• /
• 2014

ATP in quantity co-stored with neurotransmitters in the secretory vesicles of neurons, by being co-released with the neurotransmitters, takes an important role to modulate the stimulus-secretion response of neurotransmitters. Here, in this study, the modulatory effect of ATP was studied in $Ca^{2+}$ channels of cultured rat adrenal chromaffin cells to investigate the physiological role of ATP in neurons. The $Ca^{2+}$ channel current was recorded in a whole-cell patch clamp configuration, which was modulated by ATP. In 10 mM $Ba^{2+}$ bath solution, ATP treatment (0.1 mM) decreased the $Ba^{2+}$ current by an average of $36{\pm}6%$ (n=8), showing a dose-dependency within the range of $10^{-4}{\sim}10^{-1}mM$. The current was recovered by ATP washout, demonstrating its reversible pattern. This current blockade effect of ATP was disinhibited by a large prepulse up to +80 mV, since the $Ba^{2+}$ current increment was larger when treated with ATP ($37{\pm}5%$, n=11) compared to the control ($25{\pm}3%$, n=12, without ATP). The $Ba^{2+}$ current was recorded with $GTP{\gamma}S$, the non-hydrolyzable GTP analogue, to determine if the blocking effect of ATP was mediated by G-protein. The $Ba^{2+}$ current decreased down to 45% of control with $GTP{\gamma}S$. With a large prepulse (+80 mV), the current increment was $34{\pm}4%$ (n=19), which $25{\pm}3%$ (n=12) under control condition (without $GTP{\gamma}S$). The $Ba^{2+}$ current waveform was well fitted to a single-exponential curve for the control, while a double-exponential curve best fitted the current signal with ATP or $GTP{\gamma}S$. In other words, a slow activation component appeared with ATP or $GTP{\gamma}S$, which suggested that both ATP and $GTP{\gamma}S$ caused slower activation of $Ca^{2+}$ channels via the same mechanism. The results suggest that ATP may block the $Ca^{2+}$ channels by G-protein and this $Ca^{2+}$ channel blocking effect of ATP is important in autocrine (or paracrine) inhibition of adrenaline secretion in chromaffin cell.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.1-23
• /
• 2014

Market forecasting aims to estimate the sales volume of a product or service that is sold to consumers for a specific selling period. From the perspective of the enterprise, accurate market forecasting assists in determining the timing of new product introduction, product design, and establishing production plans and marketing strategies that enable a more efficient decision-making process. Moreover, accurate market forecasting enables governments to efficiently establish a national budget organization. This study aims to generate a market growth curve for ICT (information and communication technology) goods using past time series data; categorize products showing similar growth patterns; understand markets in the industry; and forecast the future outlook of such products. This study suggests the useful and meaningful process (or methodology) to identify the market growth pattern with quantitative growth model and data mining algorithm. The study employs the following methodology. At the first stage, past time series data are collected based on the target products or services of categorized industry. The data, such as the volume of sales and domestic consumption for a specific product or service, are collected from the relevant government ministry, the National Statistical Office, and other relevant government organizations. For collected data that may not be analyzed due to the lack of past data and the alteration of code names, data pre-processing work should be performed. At the second stage of this process, an optimal model for market forecasting should be selected. This model can be varied on the basis of the characteristics of each categorized industry. As this study is focused on the ICT industry, which has more frequent new technology appearances resulting in changes of the market structure, Logistic model, Gompertz model, and Bass model are selected. A hybrid model that combines different models can also be considered. The hybrid model considered for use in this study analyzes the size of the market potential through the Logistic and Gompertz models, and then the figures are used for the Bass model. The third stage of this process is to evaluate which model most accurately explains the data. In order to do this, the parameter should be estimated on the basis of the collected past time series data to generate the models' predictive value and calculate the root-mean squared error (RMSE). The model that shows the lowest average RMSE value for every product type is considered as the best model. At the fourth stage of this process, based on the estimated parameter value generated by the best model, a market growth pattern map is constructed with self-organizing map algorithm. A self-organizing map is learning with market pattern parameters for all products or services as input data, and the products or services are organized into an $N{\times}N$ map. The number of clusters increase from 2 to M, depending on the characteristics of the nodes on the map. The clusters are divided into zones, and the clusters with the ability to provide the most meaningful explanation are selected. Based on the final selection of clusters, the boundaries between the nodes are selected and, ultimately, the market growth pattern map is completed. The last step is to determine the final characteristics of the clusters as well as the market growth curve. The average of the market growth pattern parameters in the clusters is taken to be a representative figure. Using this figure, a growth curve is drawn for each cluster, and their characteristics are analyzed. Also, taking into consideration the product types in each cluster, their characteristics can be qualitatively generated. We expect that the process and system that this paper suggests can be used as a tool for forecasting demand in the ICT and other industries.

• Transactions of Materials Processing
• /
• v.18 no.8
• /
• pp.640-645
• /
• 2009

Recently, boss and rib test based on backward extrusion process was proposed to quantitatively evaluate the interfacial friction condition in bulk forming process. In this test, the tube-shaped punch with hole pressurizes the workpiece so that the boss and rib are formed along the hole and outer surface of the punch. It was experimentally and numerically revealed that the height of boss is higher than that of the rib under the severe friction condition. This work is focused on the effect of the punch design and flow stress on deformation pattern in boss and rib test. From the boss and rib test simulations, it was found that there is slight variation in both the heights of boss and rib according to the length of punch land, nose radius, and face angle. However the hole diameter of the punch and the clearance between the punch and die have a significant influence on the calibration curves showing the heights of the boss and rib. In addition, the effect of flow stress on the calibration curves was investigated through FE simulations. It was found that there is no effect of strength coefficient of the workpiece on the calibration curves for estimation of friction condition. On the other hand, the strain-hardening exponent of the workpiece has a significant influence on the calibration curve.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.6
• /
• pp.629-635
• /
• 2014

This paper presents annual energy production (AEP) by a 1.5kW wind turbine due to be installed in Deokjeok-Do island. Local wind data is determined by geometric shape of Deokjeok-Do island and annual wind data from Korea Institute of Energy Research at three places considered to be installed the wind turbine. Numerical simulation using WindSim is performed to obtain flow pattern for the whole island. The length of each computation grid is 40 m, and k-e turbulence model is imposed. AEP is determined by the power curve of the wind turbine and the local wind data obtained from numerical simulation. To capture the more detailed flow pattern at the specific local region, Urumsil-maul inside the island, fine mesh having the grid length of 10m is evaluated. It is noted that the input data for numerical simulation to the local region is used the wind data obtained by the numerical results for the whole island. From the numerical analysis, it is found that a local AEP at the Urumsil-maul has almost same value of 1.72 MWh regardless the grid resolutions used in the present calculation. It is noted that relatively fine mesh used for local region is effective to understand the flow pattern clearly.

• Journal of the Korean Society of Costume
• /
• v.62 no.7
• /
• pp.13-28
• /
• 2012

This study examines history of Korean peony patterns and characteristics of peony patterns on the fabric. It is classified according to expression methods, and it analyzes the characteristics of 71 kinds of peony woven on 66 Korean fabrics. First, it was observed that 38 of the 66 studied fabrics (57.6%) were relics from the 17th century, and from this it can be deduced that the peony patterns began to appear regularly around the latter half of the 16th century and were used habitually in the 17th century. Second, 71 kinds on 66 fabrics can be divided into Real Type, Design Type, and Abstraction Type according to expression methods. Among these types, 49 kinds of them are Real Types (69.0%), forming the greatest part and 19 kinds belonging to the Design Type (26.8%), and lastly, 3 kinds were under the Abstraction Type (4.2%). In particular, peony patterns of Design Types and Abstraction Types from the 17th century and from the 19th century to the 20th century were more prevalent, compared with those before the 16th century or the 18th century. Third, Real Types shown on the Korean fabrics are subdivided into 9 types, and the Real Type A among them, which describes to be as real as possible, is 12 kinds, the largest number of them. Therefore, real and natural pattern of peony is the favorite type in Korea, while rather emphasized pattern of peony is the more preferred pattern in China. And also Design Types are subdivided into 6 types again; There are 6 kinds of design type A, the largest part of Design Types. Patterns of Design Type A are most similar to real peony flowers, but more simplified than the Real Type A. This result also contrasted with the trend in China, where the Design Type C, expressed petals in detail was the favored pattern. Fourth, 9 kinds of unique types are found in Korean fabrics, especially Real Type M has not been shown on Chinese fabrics. Real type M, consisting of two parts, inner and outer, where two curve lines between two parts appear as antennas of a butterfly.