• 한국토양동물학회지
• /
• 제8권1_2호
• /
• pp.32-36
• /
• 2003

상주시에서 위치한 갑장산(805.7 m)을 대상으로 고도 200m부터 800m까지 100m 간격으로 7개의 시험구를 설정하여 2001년 8월부터 2001년 10월까지 당밀을 이용한 pitfall trap를 설치하여 고도별, 계절별 다양도 및 우점도 지수를 알아보았다. 그 결과 먼지벌레와, 딱정벌레과 그리고 송장벌레과에 속한 곤충들이 채집되었고, 전체 6,304개체 중 먼지 벌레과가 6,163개체로 98% 이상을 차지하였다. 고도 200m부터 700m까지 점차적으로 개체수의 증가추세를 보이다가 800m에서 급격하게 감소하였다. 고도 700m에서 심슨의 우점도지수는 0.66으로 가장 높게 나타났으며, 800m에서 0.47로 가장 낮게 나났다. 반면 심슨의 다양도 지수는 800m에서 0.53으로 가장 높게 나타났다. 계절별 우점도 및 다양도 지수는 0.54에서 0.55로 큰 차이를 발견할 수 없었으며, 과 별 다양도지수는 먼지벌레과에서 가장 높았다.

• Journal of Welding and Joining
• /
• 제20권6호
• /
• pp.30-30
• /
• 2002

It has been reported that the creep characteristics on weldment which is composed of weld metal(W.M), fusion line(F.L), heat-affected zone(HAZ), and base meta(B.M) could be unpredictably changed in severe service conditions such as high temperature and high pressure. However, the studies done on creep damage in power plant components have been mostly conducted on B.M and not the creep properties of the localized microstructures in weldment have been thoroughly investigated yet. In this paper, it is investigated the creep characteristics for three microstructures like coarse-grain HAZ(CGHAZ), W.M, and B.M in X20CrMoV121 steel weldment by the small punch-creep-(SP-Creep) test using miniaturized specimen(l0×10×0.5mm). The W.M microstructure possesses the higher creep resistance and shows lower creep strain rate than the B.M and CGHAZ. In the lower creep load the highest creep strain rate is exhibited in CGHAZ, whereas in the higher creep load the B.M represents the high creep strain rate. The power law correlation for all microstructures exists between creep rate and creep load at 600℃. The values of creep load index (n) based on creep strain rate for B.M, CGHAZ, and W.M are 7.54, 4.23, and 5.06, respectively and CGHAZ which shows coarse grains owing to high welding heat has the lowest creep loade index. In all creep loads, the creep life for W.M shows the highest value.

• Journal of Welding and Joining
• /
• 제20권6호
• /
• pp.754-761
• /
• 2002

It has been reported that the creep characteristics on weldment which is composed of weld metal(W.M), fusion line(F.L), heat-affected zone(HAZ), and base meta(B.M) could be unpredictably changed in severe service conditions such as high temperature and high pressure. However, the studies done on creep damage in power plant components have been mostly conducted on B.M and not the creep properties of the localized microstructures in weldment have been thoroughly investigated yet. In this paper, it is investigated the creep characteristics for three microstructures like coarse-grain HAZ(CGHAZ), W.M, and B.M in X20CrMoV121 steel weldment by the small punch-creep-(SP-Creep) test using miniaturized specimen($10{\times}10{\times}0.5mm$). The W.M microstructure possesses the higher creep resistance and shows lower creep strain rate than the B.M and CGHAZ. In the lower creep load the highest creep strain rate is exhibited in CGHAZ, whereas in the higher creep load the B.M represents the high creep strain rate. The power law correlation for all microstructures exists between creep rate and creep load at $600^{\circ}C$. The values of creep load index (n) based on creep strain rate for B.M, CGHAZ, and W.M are 7.54, 4.23, and 5.06, respectively and CGHAZ which shows coarse grains owing to high welding heat has the lowest creep loade index. In all creep loads, the creep life for W.M shows the highest value.

• The Korean Journal of Ecology
• /
• 제15권4호
• /
• pp.329-335
• /
• 1992

Bionomics of diplopodes was studid near chongyongchi in the chiri mountains from sept. 1990 to dec. 1991 by surveying 10 sample sites at 12 occasions. During this period 13 species of diplopodes from 11 genera, 8 families, and 6 orders were collected. Species were more diversed under quercus mongolica followed by quercus serrata and pinus densiflora sp. epenerchodus koreanus bifidus, and e. k. koreanus were found in all sample sites and these 6 species have been reported to be distributed throughout south korea. yamasinaium sp., riukiaria semicirculalis, parafontaria koreanus, and sicotanus eurygaster were found only under quercus mongolica community and postulated to be related to diet meanwhile other enviromental factors such as temperature, soil ph, and altitude should be taken into consideration. Species diversity index was higher at altitude 700m followed by at 900m, 1, 000m, 800m, 600m, 500m, 1, 100m, 400m, 300m, and 1, 200m in discending order likely due to the enviromental factors such as climatic and edaphic affects, disturbance by human, and degree of floral diversity. Species similarity index was highest 0.78 between altitude 500m and 600m sample sites could be grouped into 3, namely first 300m, 400m, second 500m, 600m, 700m, 1, 000m, 800m, 900m, and third 1, 100m, 1, 200m.

• 유기물자원화
• /
• 제22권4호
• /
• pp.54-61
• /
• 2014

본 연구는 Bacillus sp.와 Actinomyces sp.을 포함하는 미생물배양액, 일본산입상미생물 및 미국산입상미생물 등의 기능성성분을 포함하는 기능성비료의 시비가 크리핑벤트그래스의 잔디생육과 토양 대취분해에 미치는 영향에 대해 조사하였다. 처리구는 비료의 종류에 따라 대조구(CF), 미생물배양액(M), 미생물배양액과 가축분뇨발효액비(M-L), 미생물배양액과 가축분뇨발효액비 및 아미노산액비(M-L-A), 일본산 입상미생물(JGM), 미국산 입상미생물(USGM)였다. 시험 전후 토양분석결과, pH는 시험 후에 전보다 모든 처리구에서 약간 증가하였고, 시험 종료 후 처리구간의 토양화학성은 비슷하여 공시비료의 시비는 토양환경에 거의 영향을 미치지 않았다. 잔디생육 조사결과, 엽색지수와 엽록소지수는 관행구와 비교할 때, 처리구에서 높았고, 관행구과 처리구들사이에는 조사시기별 변화경향은 비슷하나 M-L-A와 M-L처리구에서 약간 높게 나타났다. 잔디뿌리는 M-L에서 더 길었다. 대취함량 조사결과, 관행구와 비교할 때, 처리구에서 감소하였고, 관행구와 처리구들사이에는 M처리구가 관행구보다 대취분해에 효과적이었다. 본 연구 결과, Bacillus sp.와 Actinomyces sp.을 함유하는 배양미생물 처리는 다른 미생물제제에 비하여 크리핑벤트그래스의 뿌리생육과 토양 내 대취분해를 촉진하여 잔디품질을 향상시키는 잔디성장촉진 기능이 있는 비료임을 알 수 있었다.

• The Korean Journal of Ecology
• /
• 제10권2호
• /
• pp.53-62
• /
• 1987

Floristic composition and vertical distribution of Mt. Daedun (western slope) were investigated from 1985 to 1986. The results are as follows; 108 families, 346 genera, 511 species, 2 subspecies, 75 varieties, 5 forma or 593 taxa including 77 cultivars. The floral data showed the ecological characteristics such as the value 346 in Fisher's Index, H-D1-H5 in biological type, 10.9% in urban index of naturalized plants and 60.5% in erect form growth form. Based on the physiognomy and population density of dominant tree species the forest vegetation of Mt. Daedun (western slope) was classified into 5 types; Quercus mongolica forest and Q. variabilis forest at 800m above, Carpinys laxiflora forest and Acer mono forest at 700m to 800m and Sapium japonicum forest at 500m to 800m in altitude. And Lindera erythrocarpa forest and zelkova serrata forest are widely distributed at 400m to 800m in altityde along valley and at mountain foot area.

• 원예과학기술지
• /
• 제33권6호
• /
• pp.845-853
• /
• 2015

The objective of this study was to predict the timing of nitrogen (N) demand through analyzing chlorophyll fluorescence (ChlF), soil-plant analysis development (SPAD), and normalized difference vegetation index (NDVI), which are positively correlated with foliar N concentration in star cluster (Pentas lanceolata). The plants were grown in potting soil under optimal conditions for 30 d, followed by weekly irrigation with five concentrations (0, 4, 8, 16, and 24 mM) of N for an additional 30 d. These five N application levels corresponded to leaf N concentrations of 2.62, 3.48, 4.00, 4.23, and 4.69%, respectively. We measured 13 morphological and physiological parameters, as well as the responses of these parameters to various N-fertilizer treatments. The general increases in Dickson's quality index (DQI), above-ground dry weight (DW), total DW, flowering rate, ${\Delta}F/Fm$', and qP in response to treatment with 0 to 8 mM N were similar to those of SPAD, NDVI, and Fv/Fm. Consistent and strong correlations ($R^2$= 0.60 to 0.85) were observed between leaf N concentration (%) and SPAD, NDVI, ${\Delta}F/Fm$', and above-ground DW. Validation of leaf S PAD, NDVI, and ${\Delta}F/Fm$' revealed that these vegetation indices are accurate predictors of leaf N concentration that can be used for non-destructive estimation of the proper timing for N-solution irrigation of P. lanceolata. Moreover, irrigation with 8 mM N-fertilizer i s recommended w hen leaf N concentration, SPAD, NVDI, and ${\Delta}F/Fm$' ratios are reduced from their saturation values of 4.00, 50.68, 0.64, and 0.137%, respectively.

• 펄프종이기술
• /
• 제34권4호
• /
• pp.51-60
• /
• 2002

This study was carried out to develop the biochemical pulping method to enhance energy saving and decrease the capital cost through the soda pulping under atmospheric pressure (100%). Nonwood substrates, rice straw, were pretreated by white-rot fungi, Ganoderma Iucidum. It has acquired several basic data that can be applied in bio-soda pulping. The results of this study were as follow. Without any nutrients or with glucose, N and glucose+N the weight losses of rice straws inoculated by Canoderma Iucidum were 8.5~29.8%, 9.3~32% 11.8~30.1% and 11.8~24.4% respectively for 5, 10, 15, 20, 25 and 30 days incubation. The more extending incubation periods, the more increasing weight losses. The yield of untreated rice saw was 54.8% after pulping. When any nutrients was not added or glucose, N and glucose+N were added for the pretreatment, the total yields were ranged 50.6~38.5%, 48.6~34.4%, 47.2~38.4% and 49.5~42.6% respectively for 5, 10, 15, 20, 25 and 30 days incubation. The yields were gradually decreased based on extending of incubation. The physical properties of rice straw soda pulps without fungal treatment, the density, breaking length, burst index, tear index and folding endurance were 0.24 g/$\textrm{cm}^3$, 2.32 km, 0.91 kPa $m^2$/g, 56.7 mN.$m^2$/g and 35 times, respectively. After pretreatment without any nutrients or with glucose, N and glucose+N as nutrients the density was 0.27~0.30 g/$\textrm{cm}^3$, the breaking length 3.14~5.25 km, burst index 1.42~2.78 kPa.$\textrm{m}^2$/g, tear index45.8~64.5 mN.$\textrm{m}^2$/g and folding endurance 47~288 times at all incubating periods when pulping was done. The physical properties were increased with the increasing incubation periods. However, when glucose+N was added, the physical properties were shown superior results each incubating duration.

• Journal of Chest Surgery
• /
• 제26권8호
• /
• pp.591-594
• /
• 1993

To clarify the apparent hypoplasia of the descending aorta in infants with atrioventricular septal defect[AVSD] patients, we reviewed the catheterization data and angiograms of 34 consecutive patients with AVSD less than 1 year of age who underwent repair at our institution since 1985. We compared them to 10 patients with Atrial Septal Defect[ASD] and 10 patients with Ventricular Septal Defect[VSD] who were matched for age, size and Qp/Qs. The Descending Aorta Index [DAI] of the AVSD group was not different from the VSD or ASD groups, [147.9$\pm$ 34.8 mm2/m2 versus 158.6$\pm$ 31.5 mm2/m2 and 153.2$\pm$ 43.1 mm2/m2].However, the Pulmonary Artery Index [PAI] of the AVSD group was significantly larger than the other groups [684.3$\pm$ 170.7 mm2/m2 versus 454.1$\pm$ 109.1 mm2/m2 and 534.9$\pm$ 148.4 mm2/m2][p<0.05], as was the ratio of PAI/DAI in the AVSD group [4.99$\pm$ 1.77 versus 2.89$\pm$ 0.81 and 3.6$\pm$ 0.92][p<0.05]. Despite similar Qp/Qs ratios, both the mean PA pressure and the Rp/Rs in the AVSD group was higher than the VSD and ASD groups: 43.1$\pm$ 15.6 mmHg versus 29$\pm$ 11.6 mmHg and 24$\pm$ 18.1 mmHg [p<0.05], and 0.27$\pm$ 0.22 versus 0.14$\pm$ 0.03 and 0.11$\pm$ 0.05 [p<0.05] respectively. The apparent hypoplasia of the descending aorta in infants with AVSD is an illusion created by the abnormally large pulmonary arteries, which are significantly larger than in patients with ASDs or VSDs.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.21-29
• /
• 2003

본 논문에서는 원심모형실험 결과와 국내.외 현장자료를 바탕으로 연약지반에 시공된 교대말뚝기초의 측방이동 발생 가능성을 판정할 수 있는 기준을 비교.검토하였다. 이를 위해 교대말뚝기초의 측방이동에 가장 중요한 영향을 미치는 변수로서 지반조건과 성토지반 시공속도를 선정하여 총 6 종류의 원심모형실험을 실시하였다. 본 실험에서는 점성토 지반의 과잉간극수압과 지표 침하량, 교대말뚝기초의 수평변위와 휨변형, 교대말뚝기초에 작용하는 측방유동압을 성토하중 재하단계와 성토 후 80% 이상 압밀이 진행된 단계에서 측정하였으며 그 결과를 토대로 교대말뚝기초의 측방이동 판정기준을 분석하였다. 또한 원심모형실험 결과와 더불어 국내.외 현장자료를 조사 및 수집하여 교대말뚝기초의 측방이동 판정기준으로 일본 도로공단에서 제시한 측방이동지수(F)와 한국도로공사에서 제시한 수정 I지수($M_I$)에 대하여 그 타당성을 검토하였다. 그 결과 교대말뚝기초의 측방이동 판정기준으로 측방이동지수(F)는 0.03, 수정 I지수($M_I$)는 2.00으로 한계값을 수정하는 것이 타당한 것으로 나타났다.