Browse > Article

A Study of New Technique Development for Creep Evaluation of Heat Resistant Steel Weldment(I)  

유효선
백승세
권일현
이송인
Publication Information
Journal of Welding and Joining / v.20, no.6, 2002 , pp. 30-30 More about this Journal
Abstract
It has been reported that the creep characteristics on weldment which is composed of weld metal(W.M), fusion line(F.L), heat-affected zone(HAZ), and base meta(B.M) could be unpredictably changed in severe service conditions such as high temperature and high pressure. However, the studies done on creep damage in power plant components have been mostly conducted on B.M and not the creep properties of the localized microstructures in weldment have been thoroughly investigated yet. In this paper, it is investigated the creep characteristics for three microstructures like coarse-grain HAZ(CGHAZ), W.M, and B.M in X20CrMoV121 steel weldment by the small punch-creep-(SP-Creep) test using miniaturized specimen(l0×10×0.5mm). The W.M microstructure possesses the higher creep resistance and shows lower creep strain rate than the B.M and CGHAZ. In the lower creep load the highest creep strain rate is exhibited in CGHAZ, whereas in the higher creep load the B.M represents the high creep strain rate. The power law correlation for all microstructures exists between creep rate and creep load at 600℃. The values of creep load index (n) based on creep strain rate for B.M, CGHAZ, and W.M are 7.54, 4.23, and 5.06, respectively and CGHAZ which shows coarse grains owing to high welding heat has the lowest creep loade index. In all creep loads, the creep life for W.M shows the highest value.
Keywords
Miniaturized specimen, SP-Creep, B.M, Coarse-grain HAZ, W.M, Creep strain rate, Power-law, Creep load index, Creep rupture life, X20CrMoV121 steel weldment;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Remaining Creep Life Study of Cr-Mo-V Main Steam Pipe Lines /
[ Singh R.;Singh S.R. ] / International Journal of Pressure Vessels and Piping   DOI   ScienceOn
2 Development of Evaluation Technique of High Temperature Creep Characteristics by Small Punch-Creep Test Method(I) - Boiler Superheater Tube /
[ Seung Se Baek;Sung Hun Na;Eui Gyun Na;Hyo Sun Yu ] / Transactions of the KSME
3 Life-Assessment Technology for Power-Plant Components /
[ Viswanathan R.;Gehl S.M. ] / JOM Feb.
4 Development of Evaluation Technique of High Temperature Creep Characteristics by Small Punch-Creep Test Method(I) -Boiler Header- /
[ Seung Se Baek;Dong Hwan Lee;Jeong Soo Ha;Hyo Sun Yu ] / Transactions of the KSME
5 High Temperature Component Life Assessment /
[ Wevster G.A.;Ainsworth R.A. ] / CHAPMAN & HALL
6 Size and Shape Effects of Welded Joint Specimen on Creep Behavior; Pressure Vessel Technology I. /
[ Muramatsz Y.;Yamazaki M.;Hongo H.;Monma Y. ] / Proc. ICPVT 7. VDTUV
7 High Temperature Creep Behavior of Class I and Class II Solid Solution Alloys /
[ Cannon, W.R.;Sherby, O.D. ] / Alloys. Metall. Trans. A
8 Characterization of Fracture Beahvior in Small Punch Test by Combined Recrystallization-Etch Method and Rigid Plastic Analysis /
[ Moz X.;Shoji T.;Takahashi H. ] / J. Testing and Evaluation
9 Geometrical Effect on Creep in Cross Weld Specimens /
[ Storesund J.;Tu S.T. ] / International Journal of Pressure Vessels and Piping   DOI   ScienceOn
10 An Analysys of a Set of Creep Data for a 9Cr-1Mo-0.2V(P91 type) Steel /
[ Cadek, J.;Susteck V. ] / Materials Science and Engineering A225
11 Effects of Alloying Elements on the Creep Rupture Strength of Advanced 9-12% Cr Steels /
[ Seog Hyeon Ryu ] / A thesis for Doctor of Philosophy
12 Damage Mechanisms and Life Assessment of High Temperature Components /
[ Viswanathan R. ] / ASM International Metals Park