• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.447-453
• /
• 2019

In this study, the effect of supplying volume and frequency of a nutrient solution consisted with $NO_3-N$ 4.6, $NH_4-N$ 3.4, $PO_4-P$ 3, K 3, Ca 4.6 and Mg $2.2mmol{\cdot}L^{-1}$ on growth and fruit quality of 'Duke' blueberry was investigated. Three years old 'Duke' blueberry bushes cultivated in containers ($60{\times}80{\times}40cm$) filled with 130L peat moss and 40L pearlite (v/v) were selected for the experiment. The growth containers were mulched with sawdust. Two different volumes (4L and 8L) of nutrient solution was tested at three different supplying frequencies (one time, two times, and three times) per week and the drainage quality of nutrient solution and fruit quality of 'Duke' blueberry was evaluated. The optimal drainage rate for the vegetable cultivation is known to be 20-30%. The results revealed that the average drainage rates of 27% and 29% for the nutrient solution supplied in 'Duke' blueberry growth medium at 4L, 2 times/7 days and 4L, 3 times/7days, respectively. The highest shoot diameter (4.2mm) and shoot length (31cm) of 'Duke' blueberry was recorded with the 8L of nutrient solution supplied at 3 times per 7 days. According to the analysis of inorganic components in the drainage of nutrient solution, there was a tendency of absorbing nitrogen at the early stage of growth. The supplying volume and frequency of nutrient solution was not significantly affected on 'Duke' blueberry fruit weight, soluble solids content, and titratable acidity. The highest yield per bush (2.7kg) was recorded for the nutrient solution supplied with 4L at three times per 7 days, while the 4L nutrient solution supplied at one time per 7 days resulted the lowest yield of 1.4kg per bush. Consequently, the tested nutrient solution can be applied for the 'Duke' blueberry bushes with the volume of 4L at three times per week for the better crop growth.

• Journal of Animal Environmental Science
• /
• v.10 no.2
• /
• pp.111-118
• /
• 2004

This study analyzed temperature increase, microorganism changes, and inactivation of pathogenic microorganisms in pig slurry when treated with thermophilic microorganisms in Thermophilic Aerobic Oxidation(TAO) system. An amount of $6 m^3$ of pig slurry was treated in an $18 m^3(3.0\times2.5\times2.4 m)$ reactor for 5 to 7 days in two groups: the control of pig slurry only and the treatment of pig slurry with 6 liters of thermophilic microorganism(Bacillus sp.). To study the microorganism changes in the reactor, the populations of aerobic mesophilic microorganisms, thermophilic microorganisms and general pathogens were analyzed. To study the inactivation of pathogenic microorganisms, the levels of E. coli, Salmonella sp, Crytosporidium parvum and Giardia lamblia were analyzed. The temperature inside the reactor ranged from 18 to $62^{\circ}C$ for the control while far the treatment group it ranged from 18 to $66^{\circ}C$, showing a slightly higher array. With regard to changes in microorganisms, both mesophilic and thermophilic organisms decreased from $3.1\times10^6$ to $1.2\times10^2$ CFU/ml and from $1.0\times10^4$ to $8.0\times10^1$ CFU/ml, respectively, in the control. In the treatment, on the other hand, mesophilic organisms decreased from $3.0\times10^8$ CFU/ml to $8.6\times10^5$ CFU/ml while thermophilic organisms increased sharply from $2.0\times10^6$ to $1.2\times10^8$ CFU/ml. For pathogens, Salmonella and Giardia were not detected either before or after the treatment, while E. coli and C. parvum were found to be $10^5$ CFU/ml each before treatment and negative after it. From this experiment, it was concluded that thermophilic microorganisms could effectively sanitize liquid compost by generating high temperature in the TAO system, which in turn would inhibit the growth of pathogenic organisms.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.388-388
• /
• 2016

Chemical mist deposition (CMD) of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) was investigated with cavitation frequency f, solvent, flow rate of nitrogen, substrate temperature $T_s$, and substrate dc bias $V_s$ as variables for efficient PEDOT:PSS/crystalline (c-)Si heterojunction solar cells (Fig. 1). The high-speed camera and differential mobility analysis characterizations revealed that average size and flux of PEDOT:PSS mist depend on f, solvent, and $V_s$. The size distribution of mist particles including EG/DI water cosolvent is also shown at three different $V_s$ of 0, 1.5, and 5 kV for a f of 3 MHz (Fig. 2). The size distribution of EG/DI water mist without PEDOT:PSS is also shown at the bottom. A peak maximum shifted from 300-350 to 20-30 nm with a narrow band width of ~150 nm for PEDOT:PSS solution, whose maximum number density increased significantly up to 8000/cc with increasing $V_s$. On the other hand, for EG/water cosolvent mist alone, the peak maximum was observed at a 72.3 nm with a number density of ~700/cc and a band width of ~160 nm and it decreased markedly with increasing $V_s$. These findings were not observed for PEDOT:PSS/EG/DI water mist. In addition, the Mie scattering image of PEDOT:PSS mist under white bias light was not observed at $V_s$ above 5 kV, because the average size of mist became smaller. These results imply that most of solvent is solvated in PEDOT:PSS molecule and/or solvent is vaporized. Thus, higher f and $V_s$ generate preferentially fine mist particle with a narrower band width. Film deposition occurred when $V_s$ was impressed on positive to a c-Si substrate at a Ts of $30-40^{\circ}C$, whereas no deposition of films occurred on negative, implying that negatively charged mist mainly provide the film deposition. The uniform deposition of PEDOT:PSS films occurred on textured c-Si(100) substrate by adjusting $T_s$ and $V_s$. The adhesion of CMD PEDOT:PSS to c-Si enhanced by $V_s$ conspicuously compared to that of spin-coated film. The CMD PEDOT:PSS/c-Si solar cell devices on textured c-Si(100) exhibited a ${\eta}$ of 11.0% with the better uniformity of the solar cell parameters. Furthermore, ${\eta}$ increased to 12.5% with a $J_{sc}$ of $35.6mA/cm^2$, a $V_{oc}$ of 0.53 V, and a FF of 0.67 with an antireflection (AR) coating layer of 20-nm-thick CMD molybdenum oxide $MoO_x$ (n= 2.1) using negatively charged mist of 0.1 wt% 12 Molybdo (VI) phosphoric acid n-Hydrate) $H_3(PMo_{12}O_40){\cdot}nH_2O$ in methanol. CMD. These findings suggest that the CMD with negatively charged mist has a great potential for the uniform deposition of organic and inorganic on textured c-Si substrate by adjusting $T_s$ and $V_s$.

• Korean Journal of Food Science and Technology
• /
• v.49 no.3
• /
• pp.274-278
• /
• 2017

In this study, predictive mathematical models were developed to estimate the kinetics of Staphylococcus aureus growth in processed meat product galbitang. Processed meat product galbitang was inoculated with 0.1 mL of S. aureus culture and stored at 4, 10, 20, $37^{\circ}C$. The ${\mu}_{max}$ (maximum specific growth rate) and LPD (lag phase duration) values were calculated. The primary model was used to develop a response surface secondary model. The growth parameters were analyzed using the square root model as a function of storage temperature. The developed model was confirmed by calculating RMSE (Root Mean Square Error) values as statistic parameters. The LPD decreased, but ${\mu}_{max}$ increased with an increase in the storage temperature. At 4, 10, 20 and $37^{\circ}C$, $R^2$ was 0.99, 0.98, 0.99 and 0.99, respectively; RMSE was 0.39. The developed predictive growth model can be used to predict the risk of S. aureus contamination in processed meat product galbitang; hence, it has potential as an input model for the risk assessment.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.235-241
• /
• 2003

The effect of ultraviolet (UV) radiation on the characteristics of algae-derived dissolved organic matter (DOM) was examined by comparing the biodegradability and DOM fraction distribution of algal DOM before and after UV exposure. Algal DOM from two axenic cultures of Microcystis aeruginosa and Oscillatoria agardhii were irradiated for 24 h at a UV intensity of 42 W/$m^2$. A complete degradation of algal DOM during the UV exposure did not occur, remaining at constant concentrations of dissolved organic carbon(DOC). After UV exposure, however, microbial degradations were reduced by 17% in M. aeruginosa and 53% in O. agardhii, respectively, and decomposition rates also were two times lower in UV exposed algal DOM. In addition, the chemical compositions of algal DOM altered substantially after UV radiation exposure. The proportions of hydrophilic bases (HiB; protein-like DOM) decreased considerably in both algal DOM sources after UV exposure (16.8% and 20.0% of DOM, respectively), whereas those of hydrophilic acids (HiA; carboxylic acids-like DOM) increased as much as the decrease of the HiB fraction. Capillary ion electrophoresis (CE) analysis showed that several carboxylic acids increased significantly after UV exposure, further confirming an increase in HiA fractions. The results of this study clearly indicate that algal DOM can be changed in its chemical composition as well as biodegradability without complete degradation by UV radiation.

• Journal of Embryo Transfer
• /
• v.20 no.2
• /
• pp.177-184
• /
• 2005

This study was conducted to investigate the effects of recombinant bovine somatotropin (rbST) injection on conception and parturition rates in normal or repeat breeding Hanwoo. We treated 462 cows containing 79 repeat-breeding cows of multiparous and allocating 5 treatment groups. Treatment 1 (T1) was injection of 2ml saline (for pseudo treatment), T2 was one injection of rbST 250mg into the tailhead region at the estrus, T3 was twice injection of rbST 250mg both at the time of insemination and again 10 to 14 day later, T4 was once injection of rbST 500mg at insemination and T5 was twice injection of 500mg rbST both at the time of insemination and again 10 to 14day later respectively. In rbST treated groups, timed artificial inseminations (TAI) were performed fellowing estrus synchronization. 100 us GnRH was injected into the scapula region on Day 0, 25mg $PGF_2{\alpha}$ was injected on Day 7 for degeneration of corpus luteum (CL) and 100ug GnRH was injected for inducing the synchronization. The results are as fellows; When normal Hanwoo were inseminated once with rbST administration, the pregnancy rate of T2 $(67.5\pm18.48\%)$ were higher than control $(52.4\pm9.72\%)$, while the pregnancy rate of T4 $(63.3\pm5.77\%)$ were significantly higher (p.<0.05) than control $(39.3\pm12.89\%)$ in repeat breeder Hanwoo. The parturition rates of normal Hanwoo were no differences among the treatments but were significant different in repeat breeder Hanwoo (p<0.05). When the estrous was induced by Ovsynch and inseminated once with rbST administration, the pregnancy rates of T2 was $12.5\%$ higher than control in normal Hanwoo, T4 $(80.0\%)$ was highest among the treatments (p<0.05) in repeat breeder Hanwoo. When normal Hanwoo were inseminated once with rbST administration, the pregnant period was $282.7\~284.8$ days and the body weight was $25.1\~25.9kg$, there were no difference among the treatments. The ratio of sex was almost same without T4 (male vs. female=18:9). In repeat breeder Hanwoo, pregnant period was 280.4~289.3 day and body weight was $23.0\~26.6kg$, it had no difference among the treatments. The sex ratio were similar to normal Hanwoo except T4 (M : F=2 : 8). In conclusion, the pregnancy and parturition rate by once insemination could be improved by the administration of rbST 250mg in normal Hanwoo or 500mg in repeat breeder Hawoo.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.6
• /
• pp.301-306
• /
• 2005

Asian dust was collected in Korea and soils in the arid area of northern China were analysed for its physical and chemical properties, and mineral compositions for in order to interpret the origin of Aeolian soils and estimate the effect of dust wind on the soil environment in Korea. Asian dust was collected at Suwon in Korea from 2002 to 2004. Soil samples were collected from the desert and Loess plateaus around Gobi desert in China. As a result of analysis of desert soil distributed on northern region and Loess soils in China, it was observed that soil pH was about 9, organic matter 11 to $23g\;kg^{-1}$, and CEC 7.1 to $18.4cmolc\;kg^{-1}$, showing a high spatial variation among different sampling locations. About 62 to 80% of particles were composed of quartz and feldspars, 2 to 14% calcite ($CaCO_3$) and dolomite [$Ca{\cdot}Mg(CO_3)_2$], and trace other clay minerals. All the dust particles in Korea were below 50 m in diameter, and the mineral compositions were quartz, mica, feldspar and some clay minerals. Major components of clay mineral of Asian dust was mainly illite as compared to the kaolin of soils in Korea. The base saturation of exchangeable Ca, Mg, K and Na in the Asian dust was above 250% due to the high content calcite. Most of upland soil in Suwon was thin and sharp type, but Asian dust in Korea was the spherical shape. Asian dusts in Suwon, Korea, did not show a definite mineralogical variation of the dust during the collection period. Difference between the Asian dust collected in Korea and the soils in arid area of China was observed in the physical and chemical properties, especially for particle size distribution, cations such as Ca, Mg, K and Na. However, some similarities were found on the mineral compositions and chemical properties between Asian dust collected in Korea and the loess of China.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.392-399
• /
• 2013

This study aimed to investigate responses of photosynthesis, plant growth, and phytochemical contents to different artificial light sources for 'Seneca RZ' and 'Gaugin RZ' two butterhead lettuce (Lactuca sativa L.). In this study, fluorescent lamps (FL), three colors LEDs (red, blue and white, 5 : 4 : 1; RBW) and metalhalide lamps (MH) were used as artificial lighting sources. Photoperiod, air temperature, relative humidity, EC, and pH in a cultivation system were maintained at 16/8 h, $25/15^{\circ}C$, 60~70%, $1.4{\pm}0.2dS{\cdot}m^{-1}$, and $6.0{\pm}0.5$, respectively. The photosynthetic rate of both two butterhead lettuce were the highest under RBW in middle growth stage. However, in late growth stage, the photosynthetic rate of both two butterhead lettuce were higher under RBW and MH than FL. The light sources showed significant results for plant growth but those effects were different to variety. Fresh and dry weight of 'Gaugin RZ' butterhead lettuce under MH were heavier than other lights in all growth stages. Growth of 'Seneca RZ' butterhead lettuce was maximized highest under MH in middle growth stage and FL in late growth stage. In the leaf tissue of 'Seneca RZ' butterhead lettuce, tipburn symptom occurred under all light sources and in the leaf tissue of 'Gaugin RZ' butterhead lettuce, it occurred under two light sources except for fluorescent lamps in late growth stage. kinds of lamp affect plant growth more than plant quality. Relative growth rate of both two butterhead lettuce was faster in middle growth stage than late stage. Growth of 'Gaugin RZ' was shown by kinds of lamp in middle growth stage and but it was not significantly affected by light sources and variety in late stage. Most of the phytochemical contents of two butterhead lettuce were significantly affected by different light sources. Contents of all vitamins showed higher than other light sources on RBW for both two lettuce, especially ${\beta}$-Carotene content of 'Gaugin RZ' was the highest. Plant growth, photosynthesis, and phytochemical contents were observed significant effects by different light sources for two butterhead lettuce but those effects were highly different between variety and kinds of phytochemicals. Therefore, the selection of optimum light source should be considered by variety and kinds of phytochemicals in the plant factory.

• Korean Journal of Microbiology
• /
• v.51 no.4
• /
• pp.374-381
• /
• 2015

Occurrences of coastal dredged materials are ever increasing due to port construction, navigational course maintenance and dredging of polluted coastal sediments. Ocean dumping of the coastal dredged materials has become virtually prohibited as London Treaty will be enacted as of the year 2012. It will be necessary to treat and recycle the dredged materials that may carry organic pollutants and heavy metals in a reasonable and effective process: collection of the dredged materials, liquid and solid separation, and treatment of organic compounds and heavy metals. In this study we have developed a continuous bioreactor system that can treat a mixture of silt and particulate organic matter using a microbial consortium (BM-S-1). The steady-state operation conditions were: pH (7.4-7.5), temperature ($16^{\circ}C$), DO (7.5-7.9), and salt concentration (3.4-3.7%). The treatment efficiencies of SCOD, T-N and T-P of the mixture were 95-96%, 92-99%, and 79-97%. The system was also effective in removal of heavy metals such as Zn, Ni, and Cr. Levels of MLSS during three months operation period were 11,000-19,000 mg/L. Interestingly, there was little sludge generated during this period of operation. The augmented microbial consortium seemed to be quite active in the removal of the organic component (30%) present in the dredged material in association with indigenous bacteria. The dominant phyla in the treatment processes were Proteobacteria and Bacteroidetes while dominant genii were Marinobacterium, Flaviramulus, Formosa, Alteromonadaceae_uc, Flavobacteriaceae_uc. These results will contribute to a development of a successful bioremediation technology for various coastal and river sediments with a high content of organic matter, inorganic nutrients and heavy metals, leading to a successful reuse of the polluted dredged sediments.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.