• 대한수의학회지
• /
• 제47권3호
• /
• pp.291-298
• /
• 2007

Olive flounder, Paralichthys olivaceus is one of the most important cultured fish in Korea, its farming has been negatively impacted by viral, bacterial and parasitic diseases. Streptococcal infection was considered as a serious problem because of significant economic losses in olive flounder farm industry. The development and evaluation of vaccine for protection against infection by this agent were required. We evaluated the safety and efficacy of ${\beta}$-hemolytic Streptococcus (S.) iniae vaccine on olive flounder Three hundreds of flounders (weight $119.8{\pm}20.7g$, body length $22.6{\pm}1.4cm$) were reared in 0.5 tons aquaria in land-marine tank system. Seawater was provided from the sea of Inchon in Korea, and water temperature was set to $22^{\circ}C$ and $25^{\circ}C$ in the vaccination and challenge test, respectively. We used the formalin-inactivated ${\beta}$-hemolytic S. iniae (F2K) vaccine (M VAC INIAE; Kyoritsu seiyaku, Japan) originated in Japan. The vaccine was intraperitoneally administered to fish. Both of vaccinated group and control group were challenged with intraperitoneally injection by virulent S. iniae SI-36 isolates with $1.0{\times}10^7CFU/fish$ at 3 weeks after vaccination. Difference on mortality of control and vaccinated group (90.0 and 15.0%, 76.5 and 8.0% respectively) at two trials were found significant (p<0.05), and relative percent survival were 83.4% and 89.5%, respectively. The dead fishes were showed dark pigmentation of skin, abdominal extension, hemorrhagic ascites, and liver necrosis, and isolated the S. iniae strain from ascites, liver and kidney. We confirmed the safety and efficacy of ${\beta}$-hemolytic S. iniae vaccine by determinations of the optimal management condition and artificial challenge test in olive flounder.

• Journal of Animal Science and Technology
• /
• 제50권1호
• /
• pp.19-26
• /
• 2008

본 연구는 1998년부터 2006년까지 축산과학원에서 능력검정을 실시한 Duroc종 산육능력 검정자료 3,526두와 혈통자료 3,910두의 자료를 이용하여 30kg시 일당증체량, 90kg시 일당증체량, 평균 등지방두께, 90kg 도달일령 및 사료요구율에 대한 유전모수를 추정하기 위하여 실시하였다. 검정기록을 바탕으로 유전모수의 추정은 단형질 및 다형질 혼합모형을 이용하여 Gibbs sampling을 이용한 Bayesian 방법을 이용하였다. 듀록 종의 산육능력 검정자료를 바탕으로 분산분석을 실시한 결과 모든 조사형질에 대하여 성별, 연도, 계절에 있어서 고도의 유의성을 보였으며, 단형질 Bayesian 방법에 의해 추정한 Post-gibbs 후의 30kg 도달시 일당증체량, 30kg~90kg 도달시 일당증체량, 등지방두께, 90kg 도달일령 및 사료요구율의 유전력은 각각 0.43, 0.49, 0.31, 0.48 및 0.62로 추정되었다. 또한 다형질 Bayesian 방법에 의해 추정한 형질간 유전상관은 30kg 도달시 일당증체량과 30kg~90kg 도달시 일당증체량, 등지방두께, 90kg 도달일령, 사료요구율에서는 각각 －0.02, －0.13, －0.55 및 －0.15로 추정되었으며, 30kg~90kg 도달시 일당증체량과 등지방두께, 90kg 도달일령, 사료요구율간의 유전상관은 각각 0.16, －0.73, －0.32로 추정되었고, 등지방두께와 90kg 도달일령, 사료요구율에서는 각각 0.01 및 －0.08로 추정되었으며, 90kg 도달일령과 사료요구율간의 유전상관은 0.23으로 추정되었다.

• 분석과학
• /
• 제26권2호
• /
• pp.154-163
• /
• 2013

국내 신규 제초제로 등록된 pyrimisulfan에 대해 농산물 중 잔류실태를 조사하기 위하여 LC-MS/MS를 이용한 시험법을 개발하였다. Pyrimisulfan 시험법의 회수율은 현미, 감자, 감귤, 고추에서 0.005 mg/kg 수준에서 88.7~99.3%이고 0.05 mg/kg수준에서 각각 90.1~94.2%였다. 회수율에 대한 모든 분석오차는 10% 미만으로 Codex 잔류물질 분석 가이드라인에 만족하였다.16 분석을 위한 기기 조건에서 pyrimisulfan의 정량한계는 0.005 mg/kg이었으며 0.01~1.0 mg/kg 범위에서 상관계수(R) 0.999 이상의 높은 직선성을 보여주었다. 따라서 본 연구에서 개발된 잔류농약 시험법은 농산물을 대상으로 효과적인 시료 전처리 방법과 최적의 정제 과정을 확립하여 다양한 농산물에 대한 잔류량 검출이 적당함을 확인할 수 있었다. 이와 같이 확립한 pyrimisulfan의 잔류시험법은 국제적 분석 기준을 만족할 뿐만 아니라 분석과정의 신뢰성 또한 확보할 수 있어서 본 잔류농약 시험법은 공정시험법으로 사용 될 것이다.

• 대한치과기공학회지
• /
• 제36권3호
• /
• pp.141-147
• /
• 2014

Purpose: Dental casting #Gr I (Co-25Cr-5Mo-3Sn-1Mn-1Si), #Gr II (Co-25Cr-5Mo-5Cu-1Mn -1Si) and #Gr III (Co-25Cr-5Mo-3Sn-5Cu-1Mn-1Si) master alloys of granule type were manufactured the same as manufacturing processes for dental casting Ni-Cr and Co-Cr-Mo based alloys of ingot type. These alloys were analyzed melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: These alloys were manufactured such as; alloy design, the first master alloy manufatured using vacuum arc casting machine, melting metal setting in crucible, melting in VIM, pouring in the mold of bar type, cutting the gate and runner bar and polishing. These alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer indicated alloys in the crucible were set and operated. Results: The melting temperatures of these alloys measuring infrared thermal image analyzer were decreased in comparison with remanium$^{(R)}$ GM 800+, vera PDI$^{TM}$, Biosil$^{(R)}$ f, WISIL$^{(R)}$ M type V, Ticonium 2000 alloys of ingot type and vera PDS$^{TM}$(Aabadent, USA), Regalloy alloys of shot type. Conclusion: Co-Cr-Mo based alloy in addition to Sn(#Gr I alloy) were decreased the melting temperature with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2004년도 추계학술발표회
• /
• pp.43-47
• /
• 2004

두 개의 다른 위성 센서 (RADARSATSAR와 KOMPSAT EOC)를 사용하여 선박탐지 실험을 실시하였으며, 탐지성능을 검토하였다. 목포항과 울산항을 대상으로 실시하였으며 필요에 따라 현장 검증 데이터를 얻기 위하여 위성 통과 시에 선박에 승선하여 선박정보를 포함하는 Sea Truth를 취득하였다. 또한 VTS레이더 정보를 위성데이터와 비교를 통하여 위치정보의 검증을 수행하였다. 광학과 마이크로파 원격탐사에 있어 그 특성의 차이는 뚜렷하였으나, 광학의 경우 선속 3.1kts 이상인 선박의 후류가 탐지되었으며, 마이크로파의 경우, 최대 6-7kts의 선박에 대해서도 후류의 탐지는 어려웠다. 그러나, 마이크로파는 다양한 선형을 반영한 신호가 sigma nought로 표현되므로 향후 선형 정보뿐만 아니라, 침로의 추출이 가능하다는 결론을 얻었다. 또한, 동일 선박이라 할지라도 신호강도의 차이에 의해 선박이 2개 이상으로 나타나는 현상도 파악되었다. 앞으로 다양한 해상환경 및 위성 관측 모드에 따른 추가 실험을 실시하여 자동 선박추출이 가능할 것으로 판단된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권2호
• /
• pp.240-245
• /
• 2010

The effects of controlled energy restriction and duration of pre-incubation egg holding on fertility, hatchability and hatch losses were evaluated in aged broiler breeders (64 wk). The energy (ME) required for maintenance, activity, growth and anticipated egg production was calculated and offered to a control group (283-471 kcal/kg) from 21-64 weeks of age. In three other groups, ME was quantitatively reduced either by 20% (SER; severe energy restriction) or 10% (MER; moderate energy restriction) and increased by10% (EEF; excess energy feeding) over the control group (CER; controlled energy restriction). Each diet was offered to 130 pullets in individual cages, and the quantity of ME increased with age. At the end of 64 weeks, fertile eggs were collected from each dietary group for 11 consecutive days and grouped under 4 holding periods based on the length of storage (2, 5, 8 or 11 d). The influence of energy regimes, egg holding intervals and their interaction was evaluated on fertility, hatch losses and hatchability. Broiler breeders maintained on SER regime (231-419 kcal/d) produced maximum number of eggs (993) followed by MER (819), CER (624) and EEF (438) during the 11-day period. The percent fertility and hatchability was significantly (p$\leq$0.05) higher in SER and MER groups compared to CER and EEF. However, energy regimes did not influence the loss in egg weight during pre-incubation storage, shell weight, shell thickness or hatch losses as dead germs and dead in shell. The improvement in hatchability in SER and MER groups appeared to be closely related to higher fertility and lower embryonic mortality. Holding of eggs for 11 days showed a linear loss in egg weight with the length of storage, but did not influence the fertility and hatch losses. The percent hatchability on eggs set was maximum when storage period was restricted to 5 days. The interaction between energy regimes and egg holding periods exhibited better hatchability results with SER regime when eggs were held for 5 days. Response to MER was not different from SER. It was obvious that energy restriction during production period had a positive influence on egg number, fertility and hatchability in aged breeders. At 64 weeks of age, holding of fertile eggs for 5 days prior to incubation was adequate for optimum hatchability in breeders.

• Journal of Radiation Protection and Research
• /
• 제29권2호
• /
• pp.73-90
• /
• 2004

Reg. Guide 1.109의 농작물내 핵종농도 계산모델을 가동중인 원자력 시설에 적용함에 있어서의 문제점을 분석하고 개선 방안을 제시하였다. 뿌리흡수 평가에 있어서는 가동개시후 침적한 방사성 핵종이 고려될 수 있도록 모델을 변형하였다. 직접침적에 의한 가식부위내 농도 계산식에는 전류계수를 도입하였다. 변형모델의 입력변수에 내하여 국내 특성치를 설정하였다. Reg. Guide 1.109 모델과 변형모델에 동 지침서의 변수치와 국내 특성 변수치를 번갈아 입력하여 쌀알, 배추, 무 뿌리 내 $^{54}Mn,\;^{60}Co,\;^{90}Sr,\;^{137}Cs$의 농도를 다양한 가상의 침적 이력에 대해 계산, 비교하였다. 이를 통해 변형모델에 국내 특성 변수치를 사용함으로써 보다 합리적이고 현실적인 평가가 이루어 질 것으로 기대할 수 있었다.

• 한국식품조리과학회지
• /
• 제32권3호
• /
• pp.307-315
• /
• 2016

Purpose: The central composition design was used to optimize the mixture conditions of black garlic extract. Methods: The response surface methodology (RSM) was carried out from concentration of black garlic extract ($X_1$) and the amount of the black garlic extract ($X_2$) as independent variables, and salts ($Y_1$), reducing sugars ($Y_2$), the content of total phenolic compounds ($Y_3$) and ABTS radical scavenging activity ($Y_4$) as dependent variables. We confirmed the conditions that salinity was minimized and reducing sugar, total phenolic compounds and ABTS radical scavenging activity had maximum values through the response surface analysis. Results: All results had saddle points in originally set up conditions hence, ridge analysis was carried out for narrowing the experimental area. The minimum salt concentration was 16.03% at black garlic extract concentration of $14.84^{\circ}brix$ and contents of 9.26%. Reducing sugar content had maximum of value 7.30 g/mL at $24.58^{\circ}brix$ and contents of 8.08%. Total phenolic compounds contents and ABTS radical scavenging activity had maximum values at black garlic extract concentration of 20.33 and $25.02^{\circ}brix$. The results indicate that addition of black garlic extract contributed to increased reducing sugar, phenolic compounds contents and antioxidant activity of the soy sauce, but the salt concentration was not significantly affected. Conclusion: Based on the results of RSM, the optimum ranges of addition conditions for lowering the salt concentration and, increasing the sensory and functional ability of soy sauce were as follows: black garlic extract concentration of $15-25^{\circ}brix$ and content of 7.8-9.3%.

• 한국환경농학회지
• /
• 제37권3호
• /
• pp.207-212
• /
• 2018

BACKGROUND: Recently, the need for a method to cultivate 'Haryejosaeng' Satsuma mandarin has been increasing. However, there is limited information available as this is a new Satsuma mandarin cultivar, which was bred by the RDA in 2004. Many farmers who cultivate this cultivar follow the cultivation method similar to that used for 'Miyagawa' Satsuma mandarin, and suffer low production of optimum-sized fruits. METHODS AND RESULTS: This study was conducted to find out the optimum ratio of leaf-to-fruit for the stable production of high quality 'Haryejosaeng' Satsuma mandarin fruits in a non-heated plastic film house. Seven-year-old 'Haryejosaeng' Satsuma mandarin trees were used in the study. Before the treatment, the leaf-to-fruit ratio ranged from 5.7 to 17.9. The treatments included 10, 20, 30, and 40 leaves per fruit. The fruits were removed if over fruiting was observed at day 60 after full bloom. We investigated the fruit size and quality on the day of harvest. Flowering and fruiting patterns in each treatment were recorded for the following year. In the experiments, the flower-to-leaf ratio was 1.12 to 1.74. As the leaf-to-fruit ratio decreased, the fruit size and weight also decreased. Contrarily, the higher the ratio of leaf-to-fruit, the higher fruit size and weight were. It was noted that the ratio of 20:1 was ideal to produce the M grade optimum-sized Satsuma mandarin fruits on the day of harvest. However, higher ratio might result in fruits weighting above 100 g. There was no difference among the treatments in terms of fruit quality, such as total soluble solid contents, titratable acid, and color. In the subsequent years, flowering and fruiting in the treatments were lowered when the leaf number per fruit was 10, but they were improved when the leaf number per fruit was above 20. CONCLUSION: Based on the above results, the optimum ratio of leaf-to-fruit was found to be 20:1 for flowering and fruiting of 'Haryejosaeng' Satsuma mandarin. It is important that optimum ratio of leaf-to-fruit is set as a standard to produce good grade and quality of 'Haryejosaeng' Satsuma mandarin fruits.

• 전기전자학회논문지
• /
• 제18권4호
• /
• pp.552-558
• /
• 2014

본 논문에서는 원격 방사선 측정을 위한 ZigBee 원칩형 통신 모듈 설계방법을 제안한다. 제안된 ZigBee 원칩형 통신모듈 설계는 ZigBee 시스템 구성을 위해 일반적으로 사용되는 2개의 칩 제어 프로세서와 ZigBee RF 디바이스로 구성되는 방식을 한 개의 칩 모듈로 설계한다. 원격 방사선 측정을 위한 ZigBee 원칩형 통신 모듈은 무선통신 통합제어부, 센서 및 고전압 발생부, 충전 및 전원회로부, 유선통신부, RF 회로부 및 안테나부 등으로 구성된다. 무선통신 통합제어부는 ZigBee를 위한 무선통신 제어 기능 및 방사선 측정 및 제어를 위한 기능을 수행한다. 센서 및 고전압 발생부는 2차에 걸쳐 500V의 고전압을 생성하여 GM Tube를 통해 감지된 방사선에 대한 펄스를 증폭 필터링 하는 기능을 수행한다. 충전 및 전원회로부는 리튬이온 배터리의 충전 및 원칩 프로세서에 전원을 공급하는 기능을 수행한다. 유선통신부는 PC와의 인터페이스 및 디버깅을 위한 USB 인터페이스 및 원거리 유선 통신이 가능하도록 RS-485/422 인터페이스 기능을 수행한다. RF 회로부 및 안테나부는 칩안테나를 적용할 수 있도록 RLC 수동소자를 적용하여 BALUN 및 안테나 임피던스 매칭 회로를 구성하여 무선통신이 가능하도록 한다. 제안된 원격 방사선 측정을 위한 ZigBee 원칩형 통신 모듈을 설계 실험한 결과, 10m, 100m 구간에서 모두 데이터가 정상적으로 전송되어서 원격 방사선량 측정이 되었음을 확인할 수가 있었다. 또한 낮은 소비전류와 적은 비용으로 원격 방사선량 측정환경을 구축할 수 있었다. 따라서 방사선 측정장치의 선형성 확보 및 장치의 소형화를 통해 안정적인 방사선 측정 및 실시간 모니터링 환경을 구축할 수가 있었다.