• Journal of the Korean earth science society
• /
• v.42 no.5
• /
• pp.524-535
• /
• 2021

Rapid climate change and oceanic warming have increased the variability of oceanic wave heights over the past several decades. In addition, the extreme wave heights, such as the upper 1% (or 5%) wave heights, have increased more than the heights of the normal waves. This is true for waves both in global oceans as well as in local seas. Satellite altimeters have consistently observed significant wave heights (SWHs) since 1991, and sufficient SWH data have been accumulated to investigate 100-year return period SWH values based on statistical approaches. Satellite altimeter data were used to estimate the extreme SWHs at the Ieodo Ocean Research Station (IORS) for the period from 2005 to 2016. Two representative extreme value analysis (EVA) methods, the Initial Distribution Method (IDM) and Peak over Threshold (PoT) analysis, were applied for SWH measurements from satellite altimeter data and compared with the in situ measurements observed at the IORS. The 100-year return period SWH values estimated by IDM and PoT analysis using IORS measurements were 8.17 and 14.11 m, respectively, and those using satellite altimeter data were 9.21 and 16.49 m, respectively. When compared with the maximum value, the IDM method tended to underestimate the extreme SWH. This result suggests that the extreme SWHs could be reasonably estimated by the PoT method better than by the IDM method. The superiority of the PoT method was supported by the results of the in situ measurements at the IORS, which is affected by typhoons with extreme SWH events. It was also confirmed that the stability of the extreme SWH estimated using the PoT method may decline with a decrease in the quantity of the altimeter data used. Furthermore, this study discusses potential limitations in estimating extreme SWHs using satellite altimeter data, and emphasizes the importance of SWH measurements from the IORS as reference data in the East China Sea to verify satellite altimeter data.

• Archives of Plastic Surgery
• /
• v.45 no.6
• /
• pp.572-577
• /
• 2018

Background Mandibular contouring surgery to produce a more slender and small face has become popular, especially in East Asia. Narrowing genioplasty should be simultaneously performed with mandibular angle resection to achieve satisfactory results. In Korea, T-genioplasty has been frequently performed for chin narrowing. The authors developed a new, safe, and reliable method, termed M-genioplasty, that can provide a more slender and attractive lower face. Methods From June 2013 to December 2017, 36 patients underwent M-genioplasty with mandibular angle resection for lower facial contouring. Horizontal and vertical osteotomies were performed obliquely. The resected bone segments were wedge-shaped. The remaining two bone segments were rotated and approximated centrally. The lateral mandible bony step-off was trimmed off for mandibular angle resection. Results In all patients, the facial contour sufficiently improved, and most patients were satisfied with the outcome. No severe complications took place during postoperative follow-up. Conclusions M-genioplasty can provide more mandibular angle resection and can create a more acute chin angle without bone resorption than other methods, including T-genioplasty. M-genioplasty with mandibular angle resection is a safer, more accurate, and more reliable method for lower facial contouring.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.603-605
• /
• 2015

Recent IoT (Internet Of Things) development of the technology is growing rapidly. When multiple devices to perform operations on the IoT environment, it is possible to improve the efficiency of operations by different devices to join the collaborative relationship (Relation) between. Research on existing methods and has been used and the user to issue commands to each device P2M (Person to Machine) method, is now being replaced by effective M2M (Machine to Machine) manner than by way bring forth the relationship between the device P2M. In this paper, we define the relationship between the device and bring forth proposals for collaborative data transfer algorithms. To block the operation duplicated between different work through the proposed algorithm and is believed to improve the efficiency of work to do.

• Journal of the Korean Vacuum Society
• /
• v.15 no.6
• /
• pp.637-641
• /
• 2006

We present the DC and RF characteristics of 100 nm gate length InGaAs/InAlAs/GaAs metamorphic high electron mobility transistors (MHEMTs). We fabricated the T-gate with 100 nm foot print by using a positive resist ZEP520/P (MMA-MAA)/PMMA trilayer by double exposure method. The fabricated 100 nm MHEMT with a $70\;{\mu}m$ unit gate width and two fingers were characterized through do and rf measurements. The maximum drain current density of 465 mA/mm and extrinsic transconductance $(g_m)$ of 844 mS/mm were obtained with our devices. From rf measurements, we obtained the current gain cut-off frequency $(f_T)$ of 192 GHz, and maximum oscillation frequency $(f_{max})$ 310 GHz.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.617-623
• /
• 2016

Recently, IoT technology has been applied to the control of appliances in the home, and information about temperature, humidity, etc. is collected and the application of the system to control the indoor environment automatically is increasing. Currently, the network configuration of IoT devices is mainly used to connect IoT devices to the Internet through wireless gateways. Since such a method is dependent on a gateway, there are limitations in providing various services. Therefore, this paper proposes an independent method of gateway by using IoT network without using gateway by applying long distance wireless communication technology. IoT devices using the proposed long distance wireless internet technology can connect to a remote server and provide mobility that can not be supported by existing methods, thereby providing more various services. The performance evaluation of the proposed network configuration method is compared with the delay time and the amount of data generated in the existing network method constituted by the gateway and the proposed network configuration method respectively. Experimental results show that the proposed method decreases the delay time and the amount of data generated by the gateway.

• Korean Journal of Veterinary Research
• /
• v.42 no.3
• /
• pp.363-370
• /
• 2002

For the development of diagnostic polymerase chain reaction (PCR) to fungal infection by dermatophytes Trichophyton and Microsporum, detection of the fungal DNA by PCR and analysis of the DNA pattern were undertaken in the present study. A total of 15 strains were tested and those consisted of 3 reference strains and 12 isolates such as: reference strains of T mentagrophytes (downy type, ATCC 9533), T rubrum (IFO 6204) and M gypseum (ATCC 9083), and each isolate of T mentogrophytes (powdery type), T mentagrophytes (granular type), T mentogrophytes (purple-red type), T rubrum, T raubitschekii, T tonsurans, T equinum, T ajelloi, T verrucosum, M cookei, M nanum and M gypseum. The DNA were purely isolated from all strains of Trichophyton spp. and Microsporum spp. by a simple method partly consisted of disruption of fungal cells by lyophilization and grinding and extraction of fungal DNA without phenol treatment which is a routine procedure in DNA isolation. For the detection of fungal DNAs, optimal condition of PCR was determined as preheating once at $94^{\circ}C$ for 5 min, 35 cycles of denaturation at $94^{\circ}C$ for 1 min, annealing at $38^{\circ}C$ for 1 min and polymerization at $72^{\circ}C$ for 2 min, and 1 cycle of final extension at $72^{\circ}C$ for 5 min. In PCR using arbitrary primers AP-1 (5' ACCCGACCTG3') and AP-2 (5' ACGGGCCAGT3'), DNAs in various numbers and sizes were detected from different species of Trichophyton and Microsporum, while DNAs in similar size were also detected in all strains of Trichophyton spp. and Microsporum spp. There were unique DNAs observed from certain dermatophytes by AP-1 such as 1,900 bases in T rubrum, 950 and 1,100 bases in T raubitscheldi, 2,100 bases in T equinum, 400 bases in T verrucosum and 1,150 bases in M gypseum. The unique DNAs were also observed by AP-2 such as 1,200 bases in T ajelloi, 250 bases in T verrucosum, 1,150 bases in M cookei and 2,000 bases in M nanum. The results indicated that PCR can detect a specific DNA from certain Trychophyton and Microsporum spp, which can be the information for further development of diagoomc PCR to dennatophytes.

• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.1
• /
• pp.6-12
• /
• 2017

In this paper, we proposed IoT based Smart Health Service using Motion Recognition for Human UX/UI. Until now, sensor networks using M2M-based u-healthcare are using non-IP protocol instead of TCP / IP protocol. However, in order to increase the service utilization and facilitate the management of the IoT-based sensor network, many sensors are required to be connected to the Internet. Therefore, IoT-based smart health service is designed considering network mobility because it is necessary to communicate not only the data measured by sensors but also the Internet. In addition, IoT-based smart health service developed smart health service for motion detection as well as bio information unlike existing healthcare platform. WBAN communications used in u-healthcare typically consist of many networked devices and gateways. The method proposed in this paper can easily cope with dynamic changes even in a wireless environment by using a technology supporting mobility between WBAN sensor nodes, and systematic management is performed through detection of a user's motion.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1819-1824
• /
• 2018

This paper proposes a control method of ASMR(autonomous sensory meridian response) contents to relieve user's stress and improve his attention. The proposed method measures EEG(electroencephalography), attention, meditation, and eyeblink data from an EEG device and sends them to an oneM2M-compliant IoT(internet of things) server platform through an Android IoT Application. Then a SVM(support vector machine) model is built to classify user's mental health status by using EEG, attention and meditation data collected in the server platform. The ASMR contents are controlled by the mental health status classified by a SVM model and the eyeblink data. When comparing the SVM models according to types of data used, the SVM model with attention and meditation data showed accuracy of 85.7%. It was verified that the proposed control algorithm of ASMR contents properly worked as the mental health status from the SVM model and the eyeblink data changed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.3
• /
• pp.145-152
• /
• 2001

Low Rayleigh number thermal convection in a fluid layer confined between two-infinite horizontal walls kept at spatially sinusoidal temperature distributions, T_L=T_m+\Delta T\sin \kappax,\;T_U=T_m+\Delta T\sin(\kappax-\beta)$, is theoretically investigated by a regular perturbation expansion method. For small wave numbers, an upright cell is formed between the two walls at $\beta$=0. The cell is tilted, as the phase difference increases, and a flow with tow counter-rotating eddies occurs at $\beta=\pi$. when the wave number is large, isolated eddies are formed near the lower and upper walls, for all the phase differences. There exists a wave number at which maximum heat transfer rate at the walls occurs, at each of the phase differences. And the wave number increases with increase of the phase difference. for a fixed wave number, the heat transfer rate decrease with increase of the phase difference.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.44-52
• /
• 2004

The test and evaluation(T&E) of weapon systems is a significant activity in the decision-making process of defense acquisition program, providing the data of trade-off analysis, risk reduction and readiness to advance to next phase of development for the decision-maker. Currently, the modeling and simulation(M&S) is being a critical method in the test and evaluation of weapon systems. Therefore in this paper we review the current status of the test and evaluation for the defense acquisition program in Korea, and suggest an application of M&S in the T&E of weapon systems.