• 제목/요약/키워드: M/N ratio

검색결과 2,091건 처리시간 0.028초

Manufacturing of Copper(II) Oxide Powder for Electroplating from NaClO3 Type Etching Wastes

  • Hong, In Kwon;Lee, Seung Bum;Kim, Sunhoe
    • Journal of Electrochemical Science and Technology
    • /
    • 제11권1호
    • /
    • pp.60-67
    • /
    • 2020
  • In this study, copper (II) oxide powder for electroplating was prepared by recovering CuCl2 from NaClO3 type etching wastes via recovered non-sintering two step chemical reaction. In case of alkali copper carbonate [mCuCo3·nCu(OH)2], first reaction product, CuCo3 is produced more than Cu(OH)2 when the reaction molar ratio of sodium carbonate is low, since m is larger than n. As the reaction molar ratio of sodium carbonate increased, m is larger than n and Cu(OH)2 was produced more than CuCO3. In the case of m has same values as n, the optimum reaction mole ratio was 1.44 at the reaction temperature of 80℃ based on the theoretical copper content of 57.5 wt. %. The optimum amount of sodium hydroxide was 120 g at 80℃ for production of copper (II) oxide prepared by using basic copper carbonate product of first reaction. At this time, the yield of copper (II) oxide was 96.6 wt.%. Also, the chloride ion concentration was 9.7 mg/L. The properties of produced copper (II) oxide such as mean particle size, dissolution time for sulfuric acid, and repose angle were 19.5 mm, 64 second, and 34.8°, respectively. As a result of the hole filling test, it was found that the copper oxide (II) prepared with 120 g of sodium hydroxide, the optimum amount of basic hydroxide for copper carbonate, has a hole filling of 11.0 mm, which satisfies the general hole filling management range of 15 mm or less.

2013~2017년 동해 연안의 해양환경과 영양염의 시간적 변동 : 속초, 죽변, 감포 연안 (Temporal Variations of Sea Water Environment and Nutrients in the East Coast of Korea in 2013~2017: Sokcho, Jukbyeon and Gampo Coastal Areas)

  • 권기영;심정희;심정민
    • 해양환경안전학회지
    • /
    • 제25권4호
    • /
    • pp.457-467
    • /
    • 2019
  • 동해 연안의 영양염의 장기간 변동 특성을 파악하기 위하여 2013년부터 2017년까지 5년간 격월별로 속초, 죽변, 감포 연안의 3개 정점에서 수온, 염분, 용존산소, 영양염을 조사하였다. 5년 동안 동해연안에서 수온은 $1.2{\sim}28.8^{\circ}C$, 염분은 30.63~34.79, 용존산소는 3.53~7.64 mL/L의 범위였으며 수온의 연직분포 변동에 따라 환경요인들의 분포와 변동이 결정되고 있었고, 북한한류수의 남하 유입에 의해 2015년과 2016년에 속초연안에서 용존산소가 높게 나타났다. 용존무기질소(DIN, $NH_4-N+NO_2-N+NO_3-N$)의 농도는 $0.11{\sim}24.19{\mu}M$, 인산인의 농도는 $0.01{\sim}1.75{\mu}M$, 규산 규소의 농도는 $0.17{\sim}32.80{\mu}M$의 범위 내에서 변동하였다. 동해연안의 N:P 비는 0.7~54.3(평균 15.2), N:P 기울기는 해역별로 11.67~13.75의 범위로, Redfield 비(16)보다 낮아, 동해연안에서는 대체로 질산 질소가 식물플랑크톤의 성장을 제한하는 영양염인 것으로 나타났다. 전체 N:P 기울기의 상관관계($R^2$)는 0.95로 높아 주변 육상 또는 비점오염원의 영향은 크지 않은 것으로 나타났다. 결론적으로 동해 연안에서 영양염의 시 공간적 변동은 수온의 성층구조 변동에 따른 저층 영양염의 혼합에 따라 결정되었으며, 외부 수괴 유입과 연안 용승 등의 물리적 요인에 의해 주로 영향을 받고, 육상으로부터 유입에 의한 영향은 적은 것으로 나타났다.

나노영가철의 산화·환원에 의한 트리클로로에틸렌 처리특성 (Treatment Characteristics of Trichloroethylene(TCE) by Oxidation and Reduction with Nanoscale Zero-valent Iron)

  • 박영배;정용준;최정학;문병현
    • 한국환경과학회지
    • /
    • 제23권5호
    • /
    • pp.903-910
    • /
    • 2014
  • This study examined the treatment characteristics of hard-to-degrade pollutants such as TCE which are found in organic solvent and cleaning wastewater by nZVI that have excellent oxidation and reduction characteristics. In addition, this study tried to find out the degradation characteristics of TCE by Fenton-like process, in which $H_2O_2$ is dosed additionally. In this study, different ratios of nZVI and $H_2O_2$, such as 1.0 mM : 0.5 mM, 1.0 mM : 1.0 mM, and 1.0 mM : 2.0 mM were used. When 1.0 mM of nZVI was dosed with 1.0 mM of $H_2O_2$, the removal efficiency of TOC was the highest and the first order rate constant was also the highest. When 1mM of nZVI was dosed with 0.5 mM of $H_2O_2$, the first order rate constant and removal efficiency were the lowest. The size of first order rate constant and removal efficiency was in the order of nZVI 1.0 mM : $H_2O_2$ 1.0 mM > nZVI 1.0 mM : $H_2O_2$ 2.0 mM > nZVI 1.0 mM : $H_2O_2$ 0.5 mM > $H_2O_2$ 1.0 mM > nZVI 1.0 mM. It is estimated that when 1.0 mM of nZVI is dosed with 1.0 mM of $H_2O_2$, $Fe^{2+}$ ion generated by nZVI and $H_2O_2$ react in the stoichiometric molar ratio of 1:1, thus the first order rate constant and removal efficiency are the highest. And when 1.0 mM of nZVI is dosed with 2.0 mM of $H_2O_2$, excessive $H_2O_2$ work as a scavenger of OH radicals and excessive $H_2O_2$ reduce $Fe^{3+}$ into $Fe^{2+}$. As for the removal efficiency of TOC in TCE by simultaneous dose and sequential dose of nZVI and $H_2O_2$, sequential dose showed higher first order reaction rate and removal efficiency than simultaneous dose. It is estimated that when nZVI is dosed 30 minutes in advance, pre-treatment occurs and nanoscale $Fe^0$ is oxidized to $Fe^{2+}$ and TCE is pre-reduced and becomes easier to degrade. When $H_2O_2$ is dosed at this time, OH radicals are generated and degrade TCE actively.

A comparative study on damping of finite dry and saturated sand stratum under vertical vibrations

  • Prathap Kumar, M.T.;Ramesh, H.N.;Raghavebdra Rao, M.V.;Asha, M.
    • Geomechanics and Engineering
    • /
    • 제2권1호
    • /
    • pp.29-44
    • /
    • 2010
  • Vertical vibration tests were conducted using model footings of different size and mass resting on the surface of finite sand layer with different height to width ratios which was underlain by either rigid concrete base, under both dry and saturated condition. The effect of saturation on the damping ratio of finite sand stratum underlain by a rigid base has been verified and compared with the results obtained for the case of finite dry sand stratum underlain by the rigid base. Comparison of results of the experimental study showed that the damping in both the cases is less than 10%. The damping ratio obtained for finite saturated sand stratum is marginally lower than that obtained on finite dry sand stratum at H/B ratio of 0.5. The difference between the two cases becomes significant when the H/B ratio increases to 3.0, indicating the significant influence of soil moisture on damping ratio of foundation- soil system with increase in the thickness of the finite sand stratum. Comparison of the predicted damping ratio for a homogeneous sand stratum with the experimental damping ratio obtained corresponding to the height to width ratio of 3.0 of the finite sand stratum underlain by the rigid concrete base indicates a significant reduction in damping ratio of the foundation-soil system for both the cases.

다양한 항목에 따른 N-Nitrosodimethylamine(NDMA) 생성에 관한 비교 (N-Nitrosodimethylamine(NDMA) Formation according to Various Factors)

  • 김종오
    • 대한환경공학회지
    • /
    • 제29권2호
    • /
    • pp.192-196
    • /
    • 2007
  • 본 연구에서는 수처리에서 모노클로라민을 주입 할 경우 살균 부산물로 NDMA 발생정도를 조사하였다. 이를 위하여 pH, 디메칠아민 및 모노클로라민 농도, 질소비율의 변화에 따른 NDMA 생성 농도를 측정하였다. 디메칠아민 농도를 0.01 mM또는 0.05 mM로 고정시킨 조건에서 모노클로라민/디메칠아민 비율이 1보다 클 때와 작을 때에 따라 NDMA 생성에 큰 차이가 있는 것을 알 수 있었다. NDMA 생성 농도는 일반적으로 pH와 모노클로라민에 존재하는 질소비율 증가에 따라 높게 나타나는 상관성을 보여 주었으며, pH 7과 8에서는 디메칠아민을 5배 증가시킨 결과 거의 모든 조건에서 NDMA 생성도 5배 이상 증가하였다. 수 처리장에서 염소살균 결과 모노클로라민이 존재 할 경우 NDMA 생성을 촉진시킬 수 있는 것으로 조사되었다.

Validation of the neutron lead transport for fusion applications

  • Schulc, Martin;Kostal, Michal;Novak, Evzen;Czakoj, Tomas;Simon, Jan
    • Nuclear Engineering and Technology
    • /
    • 제54권3호
    • /
    • pp.959-964
    • /
    • 2022
  • Lead is an important material, both for fusion or fission reactors. The cross sections of natural lead should be validated because lead is a main component of lithium-lead modules suggested for fusion power plants and it directly affects the crucial variable, tritium breeding ratio. The presented study discusses a validation of the lead transport libraries by dint of the activation of carefully selected activation samples. The high emission standard 252Cf neutron source was used as a neutron source for the presented validation experiment. In the irradiation setup, the samples were placed behind 5 and 10 cm of the lead material. Samples were measured using a gamma spectrometry to infer the reaction rate and compared with MCNP6 calculations using ENDF/B-VIII.0 lead cross sections. The experiment used validated IRDFF-II dosimetric reactions to validate lead cross sections, namely 197Au(n, 2n)196Au, 58Ni(n,p)58Co, 93Nb(n, 2n)92mNb, 115In(n,n')115mIn, 115In(n,γ)116mIn, 197Au(n,γ)198Au and 63Cu(n,γ)64Cu reactions. The threshold reactions agree reasonably with calculations; however, the experimental data suggests a higher thermal neutron flux behind lead bricks. The paper also suggests 252Cf isotropic source as a valuable tool for validation of some cross-sections important for fusion applications, i.e. reactions on structural materials, e.g. Cu, Pb, etc.

Study on the optimization of partial nitritation using air-lift granulation reactor for two stage partial nitritation/Anammox process

  • Jung, Minki;Oh, Taeseok;Jung, Kyungbong;Kim, Jaemin;Kim, Sungpyo
    • Membrane and Water Treatment
    • /
    • 제10권4호
    • /
    • pp.265-275
    • /
    • 2019
  • This study aimed to develop a compact partial nitritation step by forming granules with high Ammonia-Oxidizing Bacteria (AOB) fraction using the Air-lift Granulation Reactor (AGR) and to evaluate the feasibility of treating reject water with high ammonium content by combination with the Anammox process. The partial nitritation using AGR was achieved at high nitrogen loading rate ($2.25{\pm}0.05kg\;N\;m-3\;d^{-1}$). The important factors for successful partial nitritation at high nitrogen loading rate were relatively high pH (7.5~8), resulting in high free ammonia concentration ($1{\sim}10mg\;FA\;L^{-1}$) and highly enriched AOB granules accounting for 25% of the total bacteria population in the reactor. After the establishment of stable partial nitritation, an effluent $NO_2{^-}-N/NH_4{^+}-N$ ratio of $1.2{\pm}0.05$ was achieved, which was then fed into the Anammox reactor. A high nitrogen removal rate of $2.0k\; N\;m^{-3}\;d^{-1}$ was successfully achieved in the Anammox reactor. By controlling the nitrogen loading rate at the partial nitritation using AGR, the influent concentration ratio ($NO_2{^-}-N/NH_4{^+}-N=1.2{\pm}0.05$) required for the Anammox was controlled, thereby minimizing the inhibition effect of residual nitrite.

Redox Equilibrium of Antimony by Square Wave Voltammetry Method in CRT Display Glass Melts

  • Jung, Hyun-Su;Kim, Ki-Dong;Kim, Hyo-Kwang;Kim, Young-Ho
    • 한국세라믹학회지
    • /
    • 제44권1호
    • /
    • pp.1-5
    • /
    • 2007
  • Fining and homogenization of melts during batch melting is closely related to the redox reaction of polyvalent element M (M: Sb, As etc), $M^{(x+n)+}+n/2O^{2-}{\rightarrow}M^{x+}+n/4O_2$. In this study, square wave voltammetry (SWV) measurements were performed to examine the redox behavior of an antimony ion in cathode ray tube (CRT) glass melts. According to results, well-separated two peaks are shown at low temperature while only one peak is shown at high temperature in voltammograms, which reveals that redox reaction of antimony consist of two steps: $Sb^{5+}/Sb^{3+}\;and\;Sb^{3+}/Sb^0$, depending on the temperature. Based on the peak potential shown in the voltammogram, the thermodynamic data and the redox ratio for two redox couple were determined.

절제된 비소세포암에서 FDG 섭취비와 Glut-1 발현 정도를 이용한 종격동 림프선 전이 여부 예측 (The Ability of FDG Uptake Ratio and Glut-1 Expression to Predict Mediastinal Lymph Node Metastasis in Resected Non-small Cell Lung Cancer)

  • 조석기;이응배
    • Journal of Chest Surgery
    • /
    • 제43권5호
    • /
    • pp.506-512
    • /
    • 2010
  • 배경: 이 연구는 비소세포암 환자에서 종격동 임파선 전이 여부를 정확히 예측하기 위해서 PET/CT에서 종격동 임파선과 폐종괴의 FDG 섭취비와 폐종괴의 Glut-1 발현 정도를 이용하여 분석 하고자 하였다. 대상 및 방법: PET/CT에서 폐종괴와 종격동 임파선에서 측정할 수 있는 정도의 FDG섭취가 있는 환자를 대상으로 하였다. FDG 섭취비는 종격동 임파선의 섭취를 폐종괴의 섭취로 나누어 구하였다. 폐종괴의 Glut-1 발현은 발현 면적으로 나타내었다. 결과: 폐종괴와 종격동 임파선의 mSUV값은 악성군에서 각각 $7.4{\pm}2.2$$4.2{\pm}2.2$, 양성군에서 각각 $7.6{\pm}3.7$$2.8{\pm}6.9$였다. FDG의 섭취비는 악성군과 양성군에서 각각 $0.58{\pm}0.23$$0.45{\pm}0.20$ (p<0.05)였다. FDG 섭취비와 Glut-1 발현 정도를 결합한 모델 중에서 {p/(1-p)}=ratio+glut+ratio${\times}$glut의 식으로 표시된 모델이 FDG 섭취비만을 이용한 모델 보다 정확히 종격동 임파선의 악성 정도를 예측할 수 있었다. 결론: 염증성 폐질환의 병력이 있는 일부 폐암 환자에서 Glut-1 발현 정도를 고려한 FDG 섭취비를 분석한 모델은 종격동 임파선의 악성 정도를 정확히 진단할 수 있다.

벼 재배 시 바이오차 펠렛 시용 수준에 따른 농업 환경 영향 및 토양 탄소격리 평가 (Evaluation of Agro- Environmental Effect and Soil Carbon Sequestration to different Application Ratios of Supplemented Biochar Pellet in the Paddy during Rice Cultivation)

  • 신중두;박도균;김희선;이선일;홍승길
    • 한국환경농학회지
    • /
    • 제39권2호
    • /
    • pp.114-121
    • /
    • 2020
  • BACKGROUND: Biochar-based fertilizers delay the nutrient release and feature a slow release effect for agricultural and environmental advantages. This experiment was conducted to evaluate agro-environmental effects of different application ratios of modified biochar pellets supplemented. METHODS AND RESULTS: The treatments consisted of the control, 40% N, 60% N and 60% N (0.07M MgO) of modified supplemented biochar pellets (MSBP), which were based on recommended ratio of nitrogen for rice cultivation. For the paddy water, the NH4-N and NO3-N concentrations in whole treatments rapidly increased at 84 days and 40 days after transplanting, respectively. The PO4-P concentrations in the MSBP were generally lower than those of the control. For the paddy soil, NH4-N concentrations in the MSBP were higher than those of the control at 5 days after transplanting, while NO3-N concentrations were not significantly different in the treatments through rice cultivation. P2O5 concentrations in the control were higher than those of the MSBP until 40 days after transplanting while K2O concentrations were not significantly different among the treatment. The highest carbon sequestration was 970 kg ha-1 in the 60% N (0.07M MgO), and the potential carbon storage in the 60% N (0.07M MgO) was higher at 222 kg ha-1 than the control during rice cultivation. It shown that the rice yield in the control was not significantly different from the 40% N and 60% N (0.07M MgO) application plots. CONCLUSION: Application of MSBP for rice cultivation was effective for carbon sequestration and agro-environmental effects even though nitrogen application ratio was reduced at 40% based on recommended application ratio of fertilizer.