• Journal of Ecology and Environment
• /
• v.35 no.4
• /
• pp.313-322
• /
• 2012

A 2-year study (2010-2011) was carried out in order to evaluate the effects of bean and maize intercropping. The experiment tested five different cropping systems: sole cropping of each crop, as well as intercropping of maize/bean with the ratios of 1:3 ($M_1B_3$), 2:2 ($M_2B_2$) and 3:1 ($M_3B_1$), each of which took place in the presence of two weed management systems (no weed control and weed eradication through manual removal), in a factorial experiment based on randomized complete block design using three replicates. Tests of homogeneity of variance for combined data over two years showed that data of both years could be analyzed together. The results showed that the effect of intercropping treatments on all measured traits in maize and bean were significantly different. A minimum land equivalent ratio (LER) for maize (0.78) was obtained for $M_3B_1$ under conditions of no weed control, while the highest LER (1.03) was observed in $M_3B_1$ under weed-free conditions. The highest (0.99) and lowest (0.70) LER values for beans were recorded for $M_1B_3$ under weed-free conditions and $M_3B_1$ under conditions of no weed control, respectively. $M_1B_3$ under weed-free conditions showed the highest total LER (2.02), while $M_3B_1$ under conditions of no weed control showed the lowest (1.48). Results of this study indicated that intercropping bean and maize can be an effective method to increase total productivity, and that the $M_1B_3$ system was the best cropping system for high productivity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6269-6273
• /
• 2015

Performance of the Alamouti algorithm based M-ary $2{\times}N$ OSTBC(Orthogonal Space Time Block Coded) MIMO(Multi Input Multi Output) system has been simulated varying two main parameters - the number of constellation(M), and the number of receiving antennas(N). Computer simulation has also been carried out using Matlab software for performance comparison between $2{\times}N$ MIMO and MRC(Maximal Ratio Combining) diversity antenna system to evaluate the degree of enhancement achieved through the use of Alamouti $2{\times}N$ MIMO. Under 10 dB EbNo QPSK scenario, $2{\times}1$ MIMO brought 4.2 dB BER improvement over single antenna system and $2{\times}2$ MIMO resulted in 7.4 dB BER improvement over $1{\times}2$ MRC.

• The Korean Journal of Malacology
• /
• v.15 no.1
• /
• pp.31-39
• /
• 1999

This study was aimed to describe the population dynamics and secondary production of Tapes philppinarum on Chohwa and Toksan tidal flats in Kwangyang Bay, from June 1994 to July 1995. The size distributions in shell length showed bimodal patterns from June 1994 to April 1995. Thereafter the distribution changed to the passage of time, indicating an increase in shell length. The mean densities decreased gradually with month. Chohwa A sustained highestdensity, followed by Chohwa B, Toksan C, and Toksan D. The recruitment of new year class occurred first on the upper tidal flat, and then moved to the lower tidal flat. The mean biomass in flesh dry weight of each year class increased in spring just before the spawning period, and thereafter decreased progressively. Annual mean biomass wasrecorded as 170.7 g m$\^$-2/ at Chohwa A, 220.7 g m$\^$-2/ at Chohwa B, 21.8 g m$\^$-2/ at Toksan C, and 45.2 g m$\^$-2/ at toksan D. Annual productions of Ruditapes philippinarum were estimated as 259.72 g m$\^$-2/ yr$\_$-1/ at Chohwa A, 359.79 g m$\^$-2/ yr$\_$-1/ at Chohwa B, 45.02 g m$\^$-2/ yr$\_$-1/ at Toksan c, 68.88 g m$\^$-2/ yr$\_$-1/ at Toksan D. Annual productions were much higher on Chohwa tidal flat than those on Toksan tidal flat. While P:B ratio were higher on Toksan tidal flat as 1.70 than those on Chohwa tidal flat as 1.58. In conclusion, the Chohwa tidal flat showed higher biomass and producion of Ruditapes philippinarum, whereas the Toksan tidal flat showed higher P:B ratio. The total amount of potential food might influence on the density, biomass nad produciton, whereas the amount of food and space per individual might influence on the growth rate and P:B ratio.

• Geomechanics and Engineering
• /
• v.2 no.1
• /
• pp.29-44
• /
• 2010

Vertical vibration tests were conducted using model footings of different size and mass resting on the surface of finite sand layer with different height to width ratios which was underlain by either rigid concrete base, under both dry and saturated condition. The effect of saturation on the damping ratio of finite sand stratum underlain by a rigid base has been verified and compared with the results obtained for the case of finite dry sand stratum underlain by the rigid base. Comparison of results of the experimental study showed that the damping in both the cases is less than 10%. The damping ratio obtained for finite saturated sand stratum is marginally lower than that obtained on finite dry sand stratum at H/B ratio of 0.5. The difference between the two cases becomes significant when the H/B ratio increases to 3.0, indicating the significant influence of soil moisture on damping ratio of foundation- soil system with increase in the thickness of the finite sand stratum. Comparison of the predicted damping ratio for a homogeneous sand stratum with the experimental damping ratio obtained corresponding to the height to width ratio of 3.0 of the finite sand stratum underlain by the rigid concrete base indicates a significant reduction in damping ratio of the foundation-soil system for both the cases.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.spc1
• /
• pp.236-241
• /
• 2006

We measured the secondary production of the amphipod Monocorophium acherusicum Costa in a seagrass bed (Zostera marina L.) in Gwangyang Bay, southern Korea. M. acherusicum biomass was positively correlated (P<0.05) with seagrass standing crop, suggesting that there were biological interactions between the two species. M. acherusicum displays two main breeding periods per year: spring (March to April) and fall (October to November). M. acherusicum biomass in the spring breeding periods was higher than in the fall. Annual secondary production of M. acherusicum was 3.54 g DW/$m^2$/yr with an annual P/B ratio of 3.48. Secondary production and the P/B ratio of M. acherusicum were lower than those observed for other amphipods inhabiting seagrass beds. These results suggest that biological interactions between M. acherusicum and seagrass, as well as dietary competition with other amphipods can potentially cause declines in secondary production and the P/B ratio.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.1
• /
• pp.7-10
• /
• 1975

The catches of mackerel by monofilament and multifilament net were compared by means of $x^2$ and t-test method. In order to improve the netting twine of drift nets, 6 shoots 5 different mesh and nylon-monofilament netting twines $(B\times2,\;C\;D,\;F,)$ and 2 shoe nylon-multifilament $(A\times2)$ which are using near the Jeju Island in contemporary days were used for the experiment. These gill no were connected in order of A, ,B, C, A, B, E, F and operated fly fishing boat Taeann Ho (7T) near sea of Jeju Ialand from May 1974 to August 1974. The results obtained are as follows: 1. B type nylon-monofilament gill nets were superior to nylon-multifilament gill nets in catch according to the result of $X^2$ test and t-test, and the catch ratio was $M_A:\;M_B=1:1.8$. 2. 75mm mesh size C, D nylon-monofilament gill nets were superior to 85mm mesh size nylonmonofilament gill nets, and their catch ratio were E, F: C, D=1:2.8. 3. The catch ratio C, D and E, F type nets were compared by means of t-teat, however could not recognized their relationship.

• Journal of environmental and Sanitary engineering
• /
• v.5 no.1
• /
• pp.83-92
• /
• 1990

Adapting two step aeration system to a waste water treatment of W-paper manufactory as Full-Scale Plants, we drew a following conclusion from its practical working. 1. Because BOD removal efficiency was 20% in A-Stage, 90% in B-Stage and total removal efficiency was 97%. It worked treatment plant well and was suitable for effluent water standard as well. Because COD removal efficiency was 42% in A-stage, 71% in B-stage and the total removal efficiency was 94% COD control was possible in effluent water quality. 2. Treatment efficiency according to a load capacity was average 20% in 1.401 BOD kg/m3/d load of A-Stage and average 90% in 0.273 BOD kg/$\textrm {m}^3$ / d load of B-Stage. 3. Treatment efficiency according to a ratio of F/M was 2.657--5.024 kg BOD/kg MLSS/d in A-Stage and BOD removal efficiency was 16-261 in the same stage. The ratio of F/M was 0.068-0.094 kg BOD /kg MLSS/d and BOD removal efficiency ratio was 85-94%. Therefore treatment efficiency could be kept stably and volume of aeration tank could be reduced wholly. 4. Treatment efficiency according to MLSS appeared BOD 20%. COD 42%, in A-Stage and removal efficiency appeared BOD 90%, COD 71% in B-Stage. They were suitable for plan condition. 5. Because of working of complemented treatment plant by AB-Process. 20,000,000 Won a month was saved than the ordinary working cost. Therefore, it was assumed that invested cost could be recollected in 19 months or so consequently.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.391-395
• /
• 2000

In this study, the temperature coefficient of resonant frequency(TC $F_{r}$), dielectric and piezoelectric properties of Pb[(S $b_{1}$2/N $b_{1}$2/)$_{0.0035}$-(M $n_{1}$3/N $b_{2}$3/)$_{0.0065}$-(Z $r_{x}$ $Ti_{1-x}$ )$_{0.90}$] $O_3$ceramics is investigated with Zr/Ti ratio. The dielectric constant and electromechanical coupling factor( $k_{p}$) showed the highest values of 1257, 0.562 respectively when the Zr/Ti ratio is 49.5/50.5. The mechanical quality factor( $Q_{m}$) is the lowest value of 713 when the Zr/Ti ratio is 49.5/50.5, and increased with the decrease of the Zr/Ti ratio. The temperature coefficient of resonant frequency(TC $F_{r}$) change abruptly at the morphotropic phase boundary(MPB), which is between the rhombohedral phase with highly negative TC $F_{r}$ of -106ppm/$^{\circ}C$ and the tetragonal phase with highly positive TC $F_{r}$ of +64pp $m^{\circ}C$ as Zr/Ti ratio changes from 50/50 to 49.5/50.5.50.5..5.50.5.5.

• Journal of Power System Engineering
• /
• v.13 no.3
• /
• pp.47-52
• /
• 2009

The effect of forging start temperature, forging ratio on the microstructure and mechanical properties of B7B4 steel ware investigated. Microstructure of centrifugal casted B7B4 steel consisted of martensite and ferrite phase. The volume fraction of ferrite increased with increase of forging start temperature and decreased with increase of forging ratio. Tensile strength and hardness decreased with higher of forging start temperature, while impact value and elongation increased with higher of forging start temperature. With increase of forging ratio, tensile strength rapidly increased up to the forging ratio of 30%, and then slowly increased, but elongation was decreased. Hardness and impact value rapidly increased with increase of forging ratio.

• Biomedical Science Letters
• /
• v.29 no.3
• /
• pp.201-205
• /
• 2023

Free adenine is mainly made during the polyamine synthesis in proliferating cells. Adenine molecule itself acts biological modulator in inflammation and cell death. In the previous report, we showed that adenine induces apoptotic cell death of B16-F10 mouse melanoma cells by eliciting of PARP and caspase 3 cleavages. In this study, we examined the adenine effect on other apoptotic molecules affecting caspase activation in B16-F10 melanoma cells. Adenine treatment make pro-apoptotic molecules active states. Bax/Bcl-2 ratio was increased and phosphorylation of mTOR and Akt was decreased in a dose dependent manner. These results showed the possibility that Bax/Bcl-2, Akt and mTOR are engaged in adenine induced apoptosis of melanoma cells.