• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1981.05a
• /
• pp.10-10
• /
• 1981

The thyroglossal duct cyst is relatively rare disease that derived congenitally from the remnant of thyroglossal duct and that was found anywhere from the foramen cecum to pyramidal lobe of thyroid. We studied the 62 cases of above disease who admitted and operated at E.N.T. dept. of N.M.C. for 20 years since 1961 to 1980 on the clinical and histopathological aspect, and we concluded following results. 1. In the age distribution, 45 cases(72.6%) were under 20 years, and in the age distribution of the known on-set of symptoms, 26 cases(58.0%) were under 10 years. In the duration, 23 cases(37.0%) were under 1 year. The sex ratio of male to female revealed 1.2:1. 2. The palpable mass were complained at 48 cases(77.4%) and 14 cases(22.6%) complained of the discharge from sinus tracts and the other complaints were dysphagia and odynophagia, etc. 3. In location 55 cases (88.7%) were at midline, 1 case(1.6%) was at right and 6 cases(9.7%) were left sided. And 47 cases(75.8%) were situated at infrahyoid region, 11 cases(17.7%) at suprahyoid, 3 cases(4.8%) at suprasternal, only 1 case(1.6%) at intralingual region. 4. In 27 cases formed fistulae, spontaneous occurrance were 7 cases and artificial occurrance were 20 cases. 5. In histopathologically among 41 cases preserving available slides, 5 cases(12.2%) had single duct and 20 cases(48.8%) had multiple accessory ducts, but 16 cases were impossible to detect the ducts. The lining epithelium composed of chiefly respiratory and squamous epithelium. 15 cases had inflammatory reaction at periductal area and 7 cases had around the cysts. The ectopic thyroid tissue was found on 6 cases(14.6%) and 1 case had the follicular adenoma. 6. In the recurrance rate among 43 cases performed sistrunk type operation, 2 cases (4.6%) recurred, and among 19 cases performed simple removal of cysts, 4 cases (21.1%) recurred.

• Korean Journal of Plant Resources
• /
• v.12 no.3
• /
• pp.240-252
• /
• 1999

Floristic composition and phytosociological studies of Mt. Chongok and Mt. Tuta were investigated, and that was compared with the previously published report in 1993. Vascular plants were composed of 100 families, 358 genera, 573 species, 95 varieties, and 18 formae, totaling 686 taxa. The vegetation was relatively well conserved based on Pteridophyta calculation (Pte-Q), 1.13. Compared with the vascular plants of the southern and northern slope area, the vascular plants of the southern slope area were composed of 87 families, 287 genera, 419 species, 73 varieties, and 11 formae, totaling 503 taxa, and those of the northern slope area consisted of 94 families, 293 genera, 427 species, 73 varieties, and 12 formae, totaling 512 taxa, respectively. Also, compared with the taxa in each side, both sides were composed of 332 species in common, southern sides, 172 species and northern sides, 182 species, respectively. The number of species of 11 families belonged to the higher level among total families taxa was composed of 328 species(47.8%). Among them, Compositae and Rosaceae were included much more species than remnant families. Korean endemic species were composed 16 families, 24 genera, 20 species, 8 varieties and 2 formae, totaling 30 species(4.4%). Compared with the Korean endemic taxa in each side, both sides were composed of 14 species in common, southern sides, 11 species and northern sides, 5 species, respectively. A naturalized plants were 20 species, correspond to 9.2% of totaling 218 species appeared in South Korea. Among them,12 species were appeared commonly in both sides, southern sides, 16 species and northern sides, 16 species, respectively. Life form spectra was H-D1-R5-e type and, useful resources plants are as follows; edible source(42.4%), medicinal source(31.5%), ornamental source(15.6%) and pasture source (13.3%) in the total region. The forest vegetation of the southern slope was classified into 1 order, 1 alliances and 5 communities; Rhododendro-Quercetalia mongolicae, Lindero-Quercion mongolicae, Quercus mongolica Typical community, Populus davidiana-Quercus mongolica community, Pinus koraiensis-Taxus cuspidata community, Pinus densiflora-Carex humilis var. nana community, Betula costata-Betula ermanii community. It is considered that the slight difference of the flora and vegetation in the northern and southern slope is mostly due to the topographical and climatic difference. Even closer investigation is required for the more accurate comparison in this area.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.763-771
• /
• 2012

In this study, total antioxidant properties of extracts from different parts of Lespedeza bicolor were determined using techniques of measuring 1,1-diphenyl-2-picryl hydrazyl/2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)-radical scavenging activity and total phenolic contents. The total antioxidant activities of leaf, stem and root extracts from various solvents (water, 50, 70, 100% ethanol, and hot-water) indicated that 50 and 70% ethanol extracts have high radical scavenging activities and phenolic contents. A systematic approach was used to determine the total antioxidant activity of different solvent fractions of the Lespedeza bicolor extracts, partitioning with chloroform, ethyl acetate, n-butanol, and water, and the ethyl acetate fraction was found to have the strongest antioxidant activity. Antioxidant assay-guided isolation was carried out to isolate potential antioxidant compounds. The ethyl acetate fraction of the leaf extract was subjected to silica gel, LH-20 and RP-18 column chromatography successively, and afforded compound 1, which was identified as eriodictyol by NMR and MS analysis, after which its antioxidant activity was determined.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.321-331
• /
• 2000

Multiple 15-hue tests were designed and implemented on a PC in the study so as to quickly and quantitatively evaluate color vision acuity. Difficulty of the test was control)ed by the value of CDBACC (color difference between adjacent color chips) calculated using a CIELAB formula. The multiple 15-hue tests consist of eight of the hue tests (test 3-10) and three of the basic color (red, green, blue) tests (test 11-13). The 15 colors used for the hue tests were specified by the 15 color coordinates that were located at a constant distance (d = 2. 3. 5. 7, 10, 20, 30. 40) from white reference in the CIE chromaticity coordinate system and were separated by a constant color difference (CDBACC = 0.75, 1.1, 1.8. 2.5. 3.5. 7.5. 11, 14) from the adjacent chips. The color coordinates for the 15 chips for the basic color tests were the same as those of the 15 points spaced equally by a constant color difference (6.87 for the green color test. 7.27 for the red color test, 7.86 for the blue color test) from the white reference along the axis of red, green and blue. Thirty normal subjects who were not color blind were taken to undergo the multiple 15-hue tests. It was observed that most of the subjects correctly arranged color chips for the tests with CDBACC greater than 5, whereas no one correctly answered for those with CDBACC less than 2. Rapid changes in the number of the subjects correctly arranged took place when CDBACC of the tests was between 2 and 4.5. In the basic color tests, unlike the hue tests having similar values of CDBACC, it was seen that the subjects arranged color chips even less correctly. It was found that JNCD (just noticeable color difference) - a measure of color vision acuity was about 3 in average for the subjects. The JNCD was chosen as the value of the CDBACC of the test for which about $50\%$ of the subjects failed to successfully arrange color chips. ERCCA (error rate of color chips arrangement) for the test with CDBACC the same as the JNCD was shown to be about $20\%$. It is expected that the multi 15-hue tests implemented on a PC in the study will be an economical tool to quickly and quantitatively evaluate color vision acuity and, accordingly, the tests can be used for early diagnosis to massive potential patients suffering from diseases (ex. diabetes, glaucoma) which may induce changes in color vision acuity.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.743-752
• /
• 2004

This experiment was conducted to investigate the effect of filtered water with silicate minerals on growth performance and pork quality. A total of 64 pigs were allotted at 37.95 kg body weight to 4 treatments in a randomized complete block(RCB) design. Each treatment had 4 replicates and treatments were I) Con(basaI diet). 2) Si-I(consumed silicate mineral filtered water and silicate mineral additive during 4 weeks before market weight), 3) Si-Il( consumed silicate mineral filtered water and silicate mineral additive during 8 weeks before market weight) and 4) Si-I1I(consumed silicate mineral filtered water and silicate mineral additive during 12 weeks before market weight). Silicate complex was added at 0.8% to basal diet. All pigs were allowed to feed and water ad libitum for 12 weeks. During last 4 weeks, average daily gain(ADG) in Si-Il and Si-III group was higher than that in Si-I group(P < 0.05). However overall experimental period, there were no significant differences in growth performance among all treatments. Acceptability of cooked pork at 7th day after slaughter in Si-lII group was higher than that in Con group(P < 0.05). The value of pH of fresh pork at 6 hours after slaughter was lower in Si-I1I group than that in Con group(P < 0.05). TBA values of fresh pork at 14th day after slaughter were lower in Si-II and Si-III groups than Con group(P < 0.05). These results demonstrated that pork quality could be improved when pigs consumed both silicate mineral and silicate mineral filtered water. However, growth performance was not improved by the consumption of silicate mineral filtered water and silicate mineral.

• Journal of Animal Science and Technology
• /
• v.54 no.4
• /
• pp.247-253
• /
• 2012

Ultrasound measures of back fat thickness (UBF), eye muscle area (UEMA) and marbling score (UMS) and carcass measures of carcass weight (CW), backfat thickness (BF), eye muscle area (EMA) and marbling score (MS) were available on 26,129 Hanwoo steers. Statistically significant differences by regions of the farms location and birth years-seasons for the steers taken ultrasound measures and their carcass measures (p<0.01) were found. Steers in Gyeonggi province showed the highest values in ultrasound measures and carcass traits except in BF compared to steers in the other provinces. Comparing between ultrasound and carcass measures, UBF was thicker in general than BF in all regions except in Daejeon city. UEMA was higher than EMA in all regions except in Gyeonggior in Jeju provinces. Especially, the difference in Jeonnam province between UEMA and EMA was $7cm^2$ while the differences between UMS and MS ranged from 0.9 to 2.26 depending on the regions of steers located. Steers born in spring showed greater ultrasound or carcass values than those born in autumn. However, carcass measures of steers born in autumn were greater than those born in spring, 2009 except MS. The pearson and residual correlations were 0.63 and 0.65 between UBF and BF, 0.31 and 0.32 between UEMA and EMA and 0.56 and 0.56 between UMS and MS, respectively.

• The Korean Journal of Pesticide Science
• /
• v.10 no.4
• /
• pp.344-350
• /
• 2006

An Antiviral producing bacterial strain was isolated from ginseng root environment in Hongcheon, Kangwon province of Republic of Korea. Identification of this bacterial strain was performed by physiological and biochemical tests along with 16S rRNA analyses. The results revealed that the bacterium was closer to genus Serratia, which was named as Gsm01. The strain was grown in Mannitol-Glutamate-Yeast (MGY) broth for 48 h. The culture was centrifuged and the filtrate obtained was tested for its ability to control Cucumber mosaic virus strain Y (CMV-Y) in greenhouse and field experiments. In the green house experiments, CF was evaluated for its ability to protect local host, Chenopodium amaranticolor and systemic host of CMV, Nicotiana tabacum cv. Xanthi-nc. It was found that, CF treatment reduced viral infection by 98% in local host; C. amaranticolor. The N. tabacum cv. Xanthi-nc plants treated with CF did not show visible viral symptoms 15 days post inoculation (dpi) and remained symptomless throughout the periods of the study. To evaluate effectiveness of CF under field conditions, experiment was carried out in a polyvinyl house. It was observed that, 52% plants were protected from viral diseases compared to non-treated plants, increasing the crop yield. This is the first report showing antiviral activity of a Serratia spp. against CMV.

• Applied Biological Chemistry
• /
• v.31 no.2
• /
• pp.169-176
• /
• 1988

Lipid contents, fatty acid compositions and free sugar contents of dried ginsengs grown for different years were studied. The lipid and free sugar were separated and quantified by silicic acid column chromatography, thin layer chromatography, gas liquid chromatography and high performance liquid chromatography. Ginseng contained $1.07{\sim}67%$ crude lipid and the hightest lipid content was shown in 3 year old root. The lipid fractions obtained by silicic acid column chromatography were mainly composed of neutral lipid$(51.35{\sim}72.30%)$. The contents of phospholipid and glycolipid in total lipids were $15.03{\sim}34.59%$ and $11.83{\sim}20.72%$, respectively. As the ginseng grew, neutral lipid content increased gradually but glycolipid decreased to the half of the one year old root. Seven components of neutral lipid separated by thin layer chromatography were identified but the other two components were not able to be identified. Triglyceride content was $14.42{\sim}23.91%$, sterol ester and unidentified material(II) were $13.58{\sim}21.26%$ and $7.13{\sim}15.83%$ respectively. The major fatty acids were linoleic acid, palmitic acid, oleic acid and linolenic acid. Linoleic acid content of total and neutral lipid was $61{\sim}65%$ palmitic acid content in phospholipid was $26{\sim}39%$ and one year old root showed the hightest contents. The fatty acid composition of neutral lipid was similar to the pattern of total lipid. Linolenic acid content of glycolipid decreased gradually. Free sugars were composed of rhamnose, fructose, glucose, sucrose, maltose and an unidentified material. The content of sucrose was $92{\sim}94%$ of total free sugars. Two year old root showed the highest sugar content and it decreased since then.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.73-83
• /
• 1993

The purpose of this study was to evaluate the effect of various acid treatments on dentin bonding. Freshly extracted human teeth were uprightly embedded in self curing acrylic resin, and their occlusal surfaces were grinded to expose flat dentin surfaces. The specimens were divided into 4 groups. Specimens of one group were not treated so as to be a control and those of the other three groups were threated with 10% polyacrylic acid, 10% phosphoric acid, and 10-3 solution(10% citric acid/3% ferric chloride) respectively. Primer, bonding resin and composite resin were applied over the treated dentin surfaces sequentially. All specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured and the treated dentin surfaces and fracured dentin surfaces were examined under a scanning electron microscope. The results were as follows: Bond strengths of acid-treated groups were higher than those of the untreated group. In the acid-treated groups, bond strength was found to be the highest in the 10-3 solution group followed by the 10% phosphoric acid group and the 10% polyacrylic acid group(P<0.01). On SEM examination of dentin surfaces, the untreated dentin surface showed a remaining smear layer and closed dentinal tubules. Dentin surfaces treated with 10 % polyacrylic acid showed a clean dentin surface without the smear layer, but showed remaining smear plugs in dentinal tubules. A dentin surface treated with 10% phosphoric acid or 10-3 solution showed open dentinal tubules without the smear layer or smear plugs. On SEM observation of the fractured dentin-resin interface, the untreated group showed that failure occurred in the smear layer. The group treated with 10% polyacrylic acid showed no resin tag remained in the dentinal tubules, but resin tags in the dentinal tubules were observed in the group treated with the 10% phosphoric acid or the 10-3 solution. On the failure mode examination, the higher the bond strength of the group, the higher the frequency of cohesive failure. The coefficient between bond strength and cohesive failure rate was 0.71.