• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.641-644
• /
• 2005

The aim of this research is to evaluate the relationship between the total effective moment $(M^E)$ and Bemoulli-Euler bending moment (M) when the ply orientations of UD CFRP in Piezoelectric Zirconate Titanate Composite Actuator (PZTCA) are changed. The obtained results as follows. Firstly, as the performance test results by the CFRP ply orientation, the performance of [0] and [90] were stable. However, while the performance of [+45] was suddenly decreased after 5 hours. Secondly, the change of $M^E$ by the CFRP ply orientation was evaluated. As the CFRP ply orientation was increased from [0] to [+60], the $M^E$ were gradually decreased. However, they became a little bit increased from [+60] to [90]. Finally, after the change of M by the CFRP ply orientation was evaluated, it was found that $M^E=2.2M$ was valid for just [0] and that there was a relationship between $M^E$ and M according to the ply orientation.

• Asia-Pacific Journal of Business
• /
• v.7 no.1
• /
• pp.31-42
• /
• 2016

Small and Medium Enterprises (SMEs) are suitable to provide employment with lower investment in densely populated countries like Bangladesh. A stochastic frontier model is used to evaluate performance of SME Banking of the commercial banks in Bangladesh. Input (Total Deposit, Cost of Fund and Salary Expenditure) and output (Finance to SME) data are collected on 45 banks which are dealt with SME for 13 quarters from $1^{st}$quarter of 2010 to $2^{nd}$quarter of 2013. Average performance of the SME banking is 0.716 in Bangladesh. That is, banks have opportunity to increase 30% performance in SME banking from the same inputs. Bangladesh Development Bank has lowest performance (0.540) while Eastern bank has the highest performance (0.753). Highest (0.743) and lowest (0.662) performance is observed during the second quarter of 2013 and fourth quarter of 2010 respectively. Inefficient Bank might be benefited by following the rules of efficient banks.

• Journal of the Korea Society for Simulation
• /
• v.23 no.3
• /
• pp.1-9
• /
• 2014

Traditional workflow time analyses have been performed treating an activity as an independent M/M/1queueing system. Using the general forms of performance measures in the M/M/1 system, various aspects of analyses can be performed. Especially, on the time analysis of an AND structure in a workflow system, the mean system sojourn time can be formalized by applying the performance measures of M/M/1 system. In the real workflow system, the AND structure cannot be described correctly under the assumption of independent M/M/1 systems. To overcome this limitation, this research makes the assumption that the all activities for a task starts simultaneously. In this situation, the theoretical solution can be derived using the performance measures of the M/G/1 system. In addition, the simulation modeling method will be proposed to analyze the AND structure of a real workflow system. Finally, some numerical results from the theoretical solutions and simulation models will be provided for verification. The main performance measures used in this research are mean queueing time and mean sojourn time.

• Korean Management Science Review
• /
• v.24 no.2
• /
• pp.33-42
• /
• 2007

In this paper we consider an alternate m machine scheduling problem in which each job having at most two eligible machines should be assigned with the objective of makespan minimization. For this problem. we propose a $O(m2^m)$ time rounding algorithm with performance ratio at most 1.5. For a little general problem where each job can be processed in at most three machines, we prove that a polynomial time algorithm does not exist with performance ratio less than 1.5.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.274-280
• /
• 2007

An ultra-wideband signal is characterized by a radiated spectrum with wide bandwidth around a relatively low center frequency. In this paper, the bit error rate (BER), packet error rate (PER), and data throughput performance for an ultra-wideband system with M-ary correlation receiver are analyze in additive white Gaussian noise (AWGN) and co-channel interference channel. To evaluate the performance of UWB system, a set of UWB communication waveform as pulse position modulated (PPM) signals consisting of more than one UWB pulse is used. The M-ary PPM signals are defined to be equally correlated in order to simplify the system performance analysis. The analysis for system performance shows that the wireless channel error significantly degrades throughput performance and can be effectively increased by hybrid ARQ scheme. Also, an attempt for comparing the data throughput of ultra-wideband system on different performance improvement schemes and parameters has been made. From the performance evaluation process, it is shown that the effects of wireless channel and hybrid ARQ scheme for ultra wideband M-ary PPM system can be evaluated by means of a suitable combination of the PER, throughput vs. signal-to-noise power ratio per bit.

• KIEAE Journal
• /
• v.7 no.1
• /
• pp.23-31
• /
• 2007

This study aims to evaluate the illuminance performance of sloped light guide with automated venetian blind systems. For the purpose, a mock-up model was constructed as a prototype of Korean office building with $12.0m{\times}7.3m{\times}3.7m$ ($w{\times}d{\times}h$) and south facing side-window mounted between the clerestory window($2.0m^2$) and the view window($5.6m^2$). The light guide of 1.28m deepth and $29^{\circ}$ tilted angle, is covered with 0.6mm galvanized steel sheet and 97% reflective film. To protect the room from low solar angle, a blind systems, 0.15m deepth and $30^{\circ}$ automated slat angle was installed. To assess illuminance performance, the totally 37 measuring points for illuminance were monitored. For the detailed analysis, photometric sensors were installed at work-plane (8 points), wall (7 points), ceiling (3points), and exterior horizontal illuminance (1 point) respectively. The performance was measured under clear sky and is monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons of light factor and uniformity are discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.684-691
• /
• 2001

In this paper, the BER performance of OFDM/M-ary PSK systems is analyzed with considering carrier-frequency offset and TCM technique, which encodes and modulations simultaneously, is adopted to OFDWM-ary PSK systems for compensation of performance degradation according to carrier-frequency offset. As a result of analysis, the error performance of OFDM/M-ary PSK systems is degraded as the frequency offset is increased. And the frequency offset should be below 0.025 in order to achieve $BER= 10^{-3}$ with $E_b/N_o$ of 10 dB. Especially, when the TCM technique is adopted to OFDM/M-ary PSK systems, the performance improvement of about 4 dB is obtained in terms of $E_b/N_o$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.299-306
• /
• 2017

The real number M-ary QAM system can reduce PAPR and effectively improve the transmission efficiency as it increases gradually the value of M according to the state of channel. However, only approximate performance analysis was performed due to the complexity of the analysis. In this paper, we introduce an exact performance analysis considering the change of a boundary line due to the difference in frequency of use of the signal points. Also, we propose a new constellation of 2 time dimension ($3{\times}2^m$)-ary QAM with odd m which has better performance in PAPR. In the performance analysis, we obtain the signal point error rate and the bit error rate of real number M-ary QAM for the various values of m and compare performance between the proposed QAM and the conventional $2^k-ary$ QAM with integer k.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.2
• /
• pp.19-40
• /
• 1994

Several factors can be chosen for evaluating seakeeping performance, such as deck wetness, propeller racing, slamming, rolling, vertical acceleration and vertical bending moment, in consi-deration of the safety of human being, cargo and ship. In fact, there are few developments for an evalua-tion method of seakeepting performance correponding with each ship's characteristics. The purpose of this paper is to develop an quantitative evaluation method of seakeeping performance according to ship types. The scope and the method of this study are as follow. (1) Obtain each response amplitude of ship's motion in waves by Ordinary Strip Method and apply it to short-crested, irregular wave for random process of the factors on seakeeping performance. (2) Define the evaluation index, the dangerousness, the maximum dangerousness and the evaluation diagram. (3) Figure out the different characteristics according to ship types by computer simulation of evaluating seakeeping performance. (4) Adopt vertical acceleration and one of rolling or lateral acceleration as the factors on seakeeping performance by clarifying the correlation of stochastic process. This study developed an evaluation method coincident with each ship's characteristics, and suggested a device for application to actual ship. This method might be useful in developing the practical system of seakeeping performance in accordance with ship types. The ship models for computer simulation are 175m container ship types, 93m tranning ship HANARA as passenger ship type, 259m bulk-carrier type and 164m pure car-carrier type.

• Journal of the Korean Institute of Educational Facilities
• /
• v.24 no.5
• /
• pp.11-18
• /
• 2017

An university dorm has significant implications in terms of providing residential, living, and learning spaces. With its supportive function, a dorm enables each university to provide higher level of education. The operation & maintenance(O&M) condition of the dorm has a decisive effect on the students' satisfaction. Accordingly, high levels of O&M services should be performed for students. However, Korean dorms are being operated and maintained by their own O&M guidelines without the consideration of spatial characteristics of dorm facilities and the comprehensive and systematic understanding on effective O&M processes. Given the fact that dorm facility can be a crucial factor in determining the entire quality of university and its O&M condition is closely related to the satisfaction of students, it is imperative that we need to pay more attention to the O&M condition and services. Therefore, the main objective of this research is to improve dorm students' satisfaction levels by applying different O&M method, preventive maintenance rather than reactive maintenance which has been performed so far. In ordering for doing it, 'Facility Management(FM) Standard' from KS, 'Facility Performance Indicator(FPI)' from APPA: Leadership in educational facilities and 'Building O&M Inspection Manual' from Korean Ministry of Land, Infrastructure and Transport were analyzed to come up with 15 significant O&M factors. After extracting O&M factors, the survey was conducted to determine importance rate and performance rate of each O&M factor. Using the Important-Performance Analysis(IPA), the priority of 15 O&M factors was established. The result of this research will be helpful for the efficient dorm facility O&M services and for facility managers to appropriately allocate the limited resources and human power.