• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.10
• /
• pp.1407-1413
• /
• 2005

An experiment was conducted in order to assess the effect of level of RDP:UDP ratio and level of feeding concentrate on milk yield, milk composition and nutrient utilization in lactating crossbred cattle. Twenty four medium producing (-10 kg/d, 45 to 135 days postpartum) lactating crossbred cows were divided into four groups of six animals each in a 2${\times}$2 factorial completely randomized design. The cows in group 1 were fed concentrate mixture I containing 59:41 RDP:UDP ratio (low UDP) at normal plane (LUDP+NP), in group 2 were fed low UDP ration at 115% of NRC (1989) requirements (LUDP+HP), whereas cows in group 3 were fed concentrate mixture II containing 52:48 RDP:UDP ratio (high UDP) at normal plane (HUDP+NP) and in group 4 were fed high UDP ration at 115% of NRC (1989) requirements (HUDP+HP). Green jowar was fed ad libitum as the sole roughage to all the animals. The experimental feeding trial lasted for 105 days. The total dry matter intake (DMI), DMI/100 kg body weight, DMI/kg $W^{0.75}$, digestibilities of DM, OM, CP, CF, EE and NFE and intakes of TDN and DCP did not differ significantly among the different groups and also due to both UDP level and plane of nutrition and also due to their interaction. The total dry matter intake varied from 145 g in group 1 (LUDP +NP) to 152.57 g/kg $W^{0.75}$ in group 2 (LUDP+HP) diet. However, increase in milk yield with increased UDP level and also with increased plane of nutrition was observed consistently throughout the experimental period. The average milk yield was 7.66, 8.15, 8.64 and 9.35 kg in groups 1, 2, 3 and 4, respectively and there was no significant difference in milk yield among different groups of cows. The overall daily average milk yields in cows fed with low and high UDP diets were 7.91 and 8.99 kg, respectively and at normal and higher plane of feeding the milk yields were 8.15 and 8.75 kg/day, respectively. Thus, there was 13.65% increase in milk yield due to high UDP level and 7.36% due to higher plane of feeding. The daily 4% FCM yields were 9.20 kg for low UDP diet and 10.28 kg for high UDP diet, whereas it was 9.11 kg at normal plane of feeding and 10.37 kg at higher plane of feeding. Fat yields for the corresponding treatment groups were 0.37, 0.43, 0.41 and 0.48 kg, respectively. The 4% FCM yield and also fat yield did not differ significantly among different dietary treatments and also due to UDP level and plane of nutrition, however, 4% FCM yield was increased by 11.74% with high UDP level and 13.83% with higher plane of feeding. The values for total solids, fat, lactose, solids-not-fat and gross energy contents in milk differed significantly (p<0.05) among the different groups and were significantly (p<0.05) higher in milk of cows fed LUDP+HP diet followed by HUDP+HP diet. Total solids (14.65 and 13.83%), lactose (5.44 and 4.92%), solids-not-fat (9.44 and 8.83%) and gross energy (887 and 838 kcal/kg) of milk decreased significantly (p<0.05) with increased UDP level while total solids (13.84 and 14.64), fat (4.84 and 5.36%) and gross energy (832 and 894 kcal/kg) increased significantly (p<0.05) with increase in plane of feeding. Gross and net energetic efficiencies and also gross and net efficiencies of nitrogen utilization for milk production were not significantly different among different groups and also were not affected significantly due to either UDP levels or plane of feeding. Results of the present study suggest that, increasing UDP level from 41% to 48% of CP in concentrate mixture and also increasing plane of feeding from normal (100%) to 115% of NRC requirements maintain a consistently higher milk production.

• Journal of Global Scholars of Marketing Science
• /
• v.15 no.3
• /
• pp.117-148
• /
• 2005

As this study aimed to examine which influence the nonverbal communication of service provider has upon service performance in terms of service industry, the specific objectives are as follows. First, it tried to examine into the relationship between the nonverbal communication in the service provider, and the emotional attachment. Nonverbal communication is divided into 4 kinds such as physical language, proxemics, paralanguage, and physical appearance. Second, it aimed to examine the relationship between the customer's attachment to the service provider, and the social competence and trust in the service provider. Third, it tried to examine into the relationship of service provider's social competence and trust with the customer satisfaction and with the switching costs. Additionally, it examined the moderating effect in the service type and the service usage period in terms of the model that was presented in this study. Given examining the verified results in these research hypotheses, those are as follows. First, given seeing the relationship between the nonverbal communication and the emotional attachment, it was represented that the physical language, proxemics, and physical appearance, except paralanguage, have significantly positive(+) influence upon emotional attachment. Second, it was indicated that emotional attachment has significantly positive(+) influence upon the social competence and trust in the service provider. Third, the social competence in the service provider had no positive effect(+) on customer satisfaction, and was having significantly positive(+) influence upon the customer's perceived switching barrier. Fourth, it was represented that the customer satisfaction toward the service provider have significantly positive(+) influence upon the switching barrier. Finally, as a result of having verified whether or not the moderating effect in the service type and the service usage period, it was indicated to be produced the difference depending on the service type in the relationships between the physical language and the emotional attachment, between the paralanguage and the emotional attachment, between the emotional attachment and the trust, and between the trust and the switching barrier. Depending on the service usage period, the difference was represented, respectively, in the relationships between the physical language and the emotional attachment and between the physical appearance and the emotional attachment.

• Progress in Medical Physics
• /
• v.8 no.2
• /
• pp.67-76
• /
• 1997

We studied optical behavior of scintillation light generated in NaI(TI) crystal using Monte Carlo simulation method. The simulation was performed for the model of NaI(TI) scintillator (size: 60 mm ${\times}$ 60 mm ${\times}$ 6 mm) using an optical tracking code. The sensitivity as a function of surface treatment (Ground, Polished, Metal-0.95RC, Polished-0.98RC, Painted- 0.98RC) of the incident surface of the scintillator was compared. The effects of NaI(TI) scintillator thickness and the refractive index of light guide optically coupling between the NaI(TI) scintillator and photomultiplier tube (PMT) were simulated. We also evaluated intrinsic position resolution of the system by calculating the spread of scintillation light generated. The sensitivities of the system having the surface treatment of Ground, Polished, Metal-0.95RC, Polished-0.98RC and Painted-0.98RC were 70.9％, 73.9％, 78.6％, 80.1％ and 85.2％, respectively, and the surface treatment of Painted-0.98RC allowed the highest sensitivity. As increasing the thickness of scintillation crystal and light guide, the sensitivity of the system was decreased. As the refractive index of light guide increases, the sensitivity was increased. The intrinsic position resolution of the system was estimated to be 1.2 mm in horizontal and vertical directions. In this study, the performance of NaI(TI)-PMT detector system was evaluated using Monte Carlo simulation. Based on the results, we concluded that the NaI(TI)-PMT detector array is a favorable configuration for small gamma camera imaging breast tumor using Tc-99m labeled radiopharmaceuticals.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.343-355
• /
• 2007

The objectives of this study was to evaluate the durability of 4 resin cements by means of microtensile bond strength test combined with thermocycling method and fractographic FE-SEM analysis. Experimental groups were prepared according to thermocycling (0, 1,000, 5,000) and the kind of resin cements, those were Variolink II, Multilink, Panavia F 2.0, Rely X Unicem. Flat dentin surfaces were created on mid-coronal dentin of extracted third molars. Then fresh dentin surface was grounded with 320-grit silicon carbide abrasive papers to create uniform smear layers. Indirect composite block (Tescera, Bisco Inc., Schaumburg, IL, USA) was fabricated ($12\;{\times}\;12\;{\times}\;6\;mm^3$). It's surface for bonding to tooth was grounded with silicon carbide abrasive papers from 180- to 600-grit serially, then sandblasted witk $20\;-\;50\;{\mu}m$ alumina oxide. According to each manufacturer's instruction, dentin surface was treated and indirect composite block was luted on it using each resin cement. For Rely X Unicem, dentin surface was not treated. The bonded tooth-resin block were stored in distilled water at $37^{\circ}C$ for 24 hours. After thermocycling, the bonded tooth-resin block was sectioned occluso-gingivally to 1.0 mm thick serial slabs using all Isomet slow-speed saw (Isomet, Buehler Ltd, Lake Bluff, IL, USA). These sectioned slabs were further sectioned to $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams. The specimens were tested with universal testing machine (EZ-Test, Shimadzu, Japan) at a crosshead speed of 1.0 mm/min with maximum load of 500 N. The data was analyzed using one-way ANOVA and Duncan's multiple comparison test at $p\;{\leq}\;0.05$ level. Within the limited results, we conclude as follows; 1. The bond strength of Variolink II was evaluated the highest among experimental groups and was significantly decreased after 1,000 thermocycling (p < 0.05). 2. The bond strength of Multilink was more affected by thermocycling than the other experimental groups and significantly decreased after 1,000 thermocycling (p < 0.05). 3. Panavia F 2.0 and Rely X Unicem showed the gradually decreased tendency of microtensile bond strength according to thermocycling but there was no significant difference (p > 0.05). 4. Adhesive based-resin cements showed lower bond strength with or without thermocycling than composite based-resin cements. 5. Variolink II & Multilink showed high bond strength and mixed failure, which was occurred with a thin layer of luting resin cement before thermocycling and gradually increased adhesive failure along the dentin surface after thermocycling. The bonding performance of resin cement can be affected by application procedure and chemical composition. Composite based-resin cement showed higher bond strength and durability than adhesive based-resin cement.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.508-514
• /
• 2016

Effects of the ethyl acetate fraction from gomchwi (Ligularia fischeri) extract against high $glucose/H_2O_2-induced$ oxidative stress and in vitro neurodegeneration were investigated to confirm the physiological property of the extract. The ethyl acetate fraction of gomchwi extract showed the highest total phenolic contents than the other solvent fractions. An anti-hyperglycemic activity of the ethyl acetate fraction was evaluated using the ${\alpha}-glucosidase$ inhibitory assay, and the half maximal inhibitory concentration ($IC_{50}$) value for ${\alpha}-glucosidase$ was found to be $727.64{\mu}g/mL$. In addition, the ethyl acetate fraction showed excellent 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt radical scavenging activity, and inhibition of malondialdehyde production. The ethyl acetate fraction also decreased intracellular reactive oxygen species, whereas neuronal cell viability against high glucose/$H_2O_2$-induced cytotoxicity was found to be increased. Finally, 3,5-dicaffeoylquinic acid as a main phenolic compound in the ethyl acetate fraction was analyzed by high-performance liquid chromatography. These results suggest that gomchwi might be a good natural source of functional materials to prevent diabetic neurodegeneration.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.333-337
• /
• 2009

A new malting barley variety, "Daho", was developed from the cross between "Milyang85 and Suwon335" at the Department of Rice and Winter Cereal Crop (DRWCC) NICS, in 2007. An elite line, YMB2064-B-8-2-4-1-1, was selected in 2004 and designated as "Milyang134". It showed good agronomic performance in the regional adaptation yield trials (RYT) from 2005 to 2007 and was released with the name of "Daho", having high yielding and BaYMV resistance. The average heading and maturing dates of "Daho" were April 19 and May 27, which were 2 days later and 1 day earlier than those of "Jinyang", leading variety, at the regional adaptation yield trials (RYT), respectively. "Daho" had longer culm length (84 cm), more spikes per $m^2$ (915) and higher 1,000 grain weight (39.2 g) than those of "Jinyang" in paddy field condition. "Daho" was showed resistance to BaYMV at the regions of Naju, Jinju, and Milyang but moderately resistance at Iksan. However, the response of "Daho" to other environmental stresses was similar to "Jinyang". The yields of "Daho" at upland and paddy fields were about 5.20 MT/ha, 4.81 MT/ha, respectively, which is about 38%, 25% higher than those of "Jinyang" in the regional adaptation yield trials (RYT), respectively. It has higher grain assortment, germination capacity, water sensitivity and Kolback index but lower malt extract, diastatic power and filtration speed than those of "Jinyang".

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.119-127
• /
• 2016

The current disinfection method of vehicles being applied in South Korea has various shortcomings. So, the epidemic has generated continuously at livestock farms. It is very important to develop an effective disinfection system for reduction of the epidemic. And various basic data is required for this development. Therefore, this study was performed to identify the nozzle type and proper discharge pressure of sprayers. The experiment was conducted from January 10, 2012 until February 28, 2012. All the performance measurement experiments were repeated five times. The subjects of experiment were the A, B and C company's products. The sprayed capacity, angle of spray and the covering area ratio were measured for each product. As a result, the sprayed capacity, angle of spray and the covering area ratio were increased as the discharge pressure of the sprayer was increased. In conclusion, the conical shaped of the nozzle is considered more appropriate than V-shaped, and the proper discharge pressure is expected to be at least 20kg/㎠.

• Journal of Intelligence and Information Systems
• /
• v.26 no.1
• /
• pp.75-95
• /
• 2020

With the growth of social networks, various forms of SNS have emerged. Based on various motivations for use such as interactivity, information exchange, and entertainment, SNS users are also on the fast-growing trend. Facebook is the main SNS channel, and companies have started using Facebook pages as a public relations channel. To this end, in the early stages of operation, companies began to secure a number of fans, and as a result, the number of corporate Facebook fans has recently increased to as many as millions. from a corporate perspective, Facebook is attracting attention because it makes it easier for you to meet the customers you want. Facebook provides an efficient advertising platform based on the numerous data it has. Advertising targeting can be conducted using their demographic characteristics, behavior, or contact information. It is optimized for advertisements that can expose information to a desired target, so that results can be obtained more effectively. it rethink and communicate corporate brand image to customers through contents. The study was conducted through Facebook advertising data, and could be of great help to business people working in the online advertising industry. For this reason, the independent variables used in the research were selected based on the characteristics of the content that the actual business is concerned with. Recently, the company's Facebook page operation goal is to go beyond securing the number of fan pages, branding to promote its brand, and further aiming to communicate with major customers. the main figures for this assessment are Facebook's 'OK', 'Attachment', 'Share', and 'Number of Click' which are the dependent variables of this study. in order to measure the outcome of the target, the consumer's response is set as a key measurable key performance indicator (KPI), and a strategy is set and executed to achieve this. Here, KPI uses Facebook's ad numbers 'reach', 'exposure', 'like', 'share', 'comment', 'clicks', and 'CPC' depending on the situation. in order to achieve the corresponding figures, the consideration of content production must be prior, and in this study, the independent variables were organized by dividing into three considerations for content production into three. The effects of content material, content structure, and message styles on Facebook's user behavior were analyzed using regression analysis. Content materials are related to the content's difficulty, company relevance, and daily involvement. According to existing research, it was very important how the content would attract users' interest. Content could be divided into informative content and interesting content. Informational content is content related to the brand, and information exchange with users is important. Interesting content is defined as posts that are not related to brands related to interesting movies or anecdotes. Based on this, this study started with the assumption that the difficulty, company relevance, and daily involvement have an effect on the dependent variable. In addition, previous studies have found that content types affect Facebook user activity. I think it depends on the combination of photos and text used in the content. Based on this study, the actual photos were used and the hashtag and independent variables were also examined. Finally, we focused on the advertising message. In the previous studies, the effect of advertising messages on users was different depending on whether they were narrative or non-narrative, and furthermore, the influence on message intimacy was different. In this study, we conducted research on the behavior that Facebook users' behavior would be different depending on the language and formality. For dependent variables, 'OK' and 'Full Click Count' are set by every user's action on the content. In this study, we defined each independent variable in the existing study literature and analyzed the effect on the dependent variable, and found that 'good' factors such as 'self association', 'actual use', and 'hidden' are important. Could. Material difficulties', 'actual participation' and 'large scale * difficulties'. In addition, variables such as 'Self Connect', 'Actual Engagement' and 'Sexual Sexual Attention' have been shown to have a significant impact on 'Full Click'. It is expected that through research results, it is possible to contribute to the operation and production strategy of company Facebook operators and content creators by presenting a content strategy optimized for the purpose of the content. In this study, we defined each independent variable in the existing research literature and analyzed its effect on the dependent variable, and we could see that factors on 'good' were significant such as 'self-association', 'reality use', 'concernal material difficulty', 'real-life involvement' and 'massive*difficulty'. In addition, variables such as 'self-connection', 'real-life involvement' and 'formative*attention' were shown to have significant effects for 'full-click'. Through the research results, it is expected that by presenting an optimized content strategy for content purposes, it can contribute to the operation and production strategy of corporate Facebook operators and content producers.

• Journal of Korean Society of Forest Science
• /
• v.52 no.1
• /
• pp.1-30
• /
• 1981

The origin and development of adventitious roots was studied using hypocotyl and epicotyl cuttings of 34 species, 24 genus of woody plants. These cuttings obtained from young seedlings cultured in vials containing distilled water only. The several characteristics of cuttings materials studied are shown in Table 1. The results are summerized as follows: 1. The circumference shapes of cross-sections of hypocotyl and epicotyl cuttings can be divided into six categories, namely, round, irregular round, ellipse, irregular ellipse, square, and triangle. Species differences within a genus did not show any difference of hypocotyl and epicotyl cross-sections shape, however, a noticeable variation among genus or higher taxa. 2. The arrangements of vascular bundles in the cross-sections of hypocotyls or epicotyls were almost all collateral types and generally showed generic characteristics differing one to the other. However, there were some variations between species within the genus. Six models of vascular bundle arrangement were proposed for all the above speices. 3. The rooting portions of hypocotyl and epicotyl cuttings in this experimental materials can be grouped as follows: (1) Interfascicular parenchyma; (Thuja orientalis. T. orientalis for. sieboldii, Acer microsieboldianum, A. palmatum, A. saccharinum, Cercis chinensis, Lespedeza bicolor, Magnolia obovata, M. sieboldii, Mallotus japonicus, Staphylea bumalda) (2) Cambial and phloem parenchyma: (Chamaecyparis obtusa, C. pisifera, Albizzia julibrissin, Buxus microphylla var. Koreana, Cereis chinensis, Euonymus japonica, Firmiana platanifolia, Lagerstroemia indica, Ligustrum salicinum, L. obtusifolium, Magnolia kobus, M. obovata, Mallotus japonicus, Morus alba, Poncirus trifoliata, Quercus myrsinaefolia, Rosa polyantha, Styrax japonica, Styrax obassia) (3) Primary ray tissues; (Euonymus japonica, Styrax japonica) (4) Leaf traces; (Quercus acutissima, Q. aliena) (5) Cortex parenchyma; (Ailanthus altissima) (6) Callus tissues; (Castanea crenata, Quercus aliena, Q. myrsinaefolia, Q. serrata) 4. As a general tendency throughout the species studied, in hypocotyl cuttings, the adventitious root primordia were originated from the interfascicular parenchyma tissue, however, leaf traces and callus tissues were contributed to the root primordia formation in epicotyl cuttings. The hypocotyl cuttings of Ailanthus altissima exhibited a special performance in the root primordia formation, this means that cortex parenchyma was participated to the origin tissue. And in Firmiana platanifolia, differening from the other most species, the root primordia were formed at the phloem parenchyma adjacent outwardly to xylem tissue of vascular bundle system as shown photo. 48. 5. All the easy-to, or difficult-to root species developed adventitious roots in vials filled with distilled water. In the difficult-to-root species, however, root formations seemed to be delayed because they almost all had selerenchyma or phloem fiber which gave some mechanical hindrance to protrusion of root primordia. On the other hand, in the easy-to-root species they seemed to form them more easily because they did not have the said tissues. The rooting portions between easy-to-root and difficult-to-root species have not clearly been distinguished, and they have multitudinous variations. 6. The species structured with the more vascular bundles in number compared with the less vascular bundles exhibited delayed rooting. In the cuttings preparation, the proximal end of cuttings was closer to root-to-stem transition region, the adventitious root formation showed easier. 7. A different case occured however with the mature stem cuttings, in both the needle-leaved and the broad-leaved species. In the hypocotyl cuttings, parenchymatous tissues sited near the vascular bundles become the most frequent root forming portions in general and relevant distinctions between both species were hardly recognizable. 8. In the epicotyl cuttings, root primordia originated mainly in leaf traces in connection with cambial and phloems or callus tissues itself. In the hypocotyl cuttings, interfascicular parenchyma was the most frequent portion of the root primordia formation. The portions of root primordia had more connection with vascular cambium system, as the tissues were continuing to be developed.

• Korean Journal of Poultry Science
• /
• v.36 no.2
• /
• pp.103-110
• /
• 2009

This experiment was conducted using 350 Lohmann Brown layers (67 weeks of age) to evaluate the dietary effect of organic or inorganic Se and Cu on their contents in chicken eggs. The layers were divided into seven groups and fed a commercial diet or one of the six experimental diets containing different levels of Se and Cu (T1, 0.3ppm organic Se; T2, 1.0ppm organic Se; T3, 1.0ppm inorganic Se; T4, 125ppm organic Cu; T5, 250ppm organic Cu; and T6, 250ppm inorganic Cu) for 5 weeks. No significant differences were observed in egg production and its qualities among groups. The contents of blood cholesterol in the birds fed various levels of Se and Cu were not significantly different as compared to control. Se contents in eggs were linearly increased as dietary Se levels increased for both sources, but Se contents from the groups fed organic Se were slightly higher than those fed inorganic Se. Sensory characteristics of eggs were not influenced by dietary treatments. In conclusion, Se contents in eggs were linearly increased as dietary levels of organic or inorganic Se increased, but eggs in layers fed the diet containing organic Se did not show higher Se contents than those in birds fed dietary inorganic Se.