• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.88-91
• /
• 2001

The mechanical properties and surface luminous intensities of copper foil have been studied with variation of the amount of additives into the electrolyte. Especially, organic compound of HEC was added from 0.1 to 10ppm for the propose of increasing the mechanical property and the surface state. The total thickness of electrodeposited copper foil was decreased with increasing the amount of organic compounds. There was not so much significant effect of the current density. It has been observed that mechanical property and surface luminous intensity increase with increasing concentration of organic compounds.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2441-2445
• /
• 2009

The effects of Si -doped MgO have been investigated in order to improve the material properties of the MgO protective layer in plasma display panels. A small amount of Si is added to the MgO pellet while the MgO layer is being deposited by using an electron-beam evaporation method. Both the surface characteristics of the protecting layer and the electro-optical properties of 4 in. test panels are investigated, such as XRD patterns, SEM images, firing and sustain voltages, secondary electron emission coefficient($\gamma$), luminance, luminous efficacy and lifetime. The firing and sustain voltage are minimized when Si concentration is 0.038%, where the luminance and luminous efficacy increase up to 17% and 26% compared with that of the pure MgO film, separately, and lifetime also shows good characteristics.

• 전기학회논문지
• /
• 제59권3호
• /
• pp.609-613
• /
• 2010

In this paper, we optimized and simulated the heatsink of 75W LED module for street lighting and evaluated the optical properties with the manufactured heatsink. the structure of LED package make simple as chip and heatslug and thermal flow is analyzed by using the FEM(Finite Element Method) with CFdesign V10. Also, we measured the temperature of heatsink and evaluated the optical properties with infrared thermal image camera and integrated sphere system for luminous flux in $1\;[m^3]$ box. As results, Heatsink optimized in 3 mm pin thickness, 6 mm base thickness and 16 number of pin count by using Heatsink-designer and got the results which is the temperature of $47.37\;[^{\circ}C]$ and thermal resistance of $0.48407\;[W/^{\circ}C]$. In thermal flow simulation, the temperature of heatsink decreased from $51.54\;[^{\circ}C]$ to $51.51\;[^{\circ}C]$ and the temperature of heatsink by the time in real measurement decreased from $47.03\;[^{\circ}C]$ to $46.87\;[^{\circ}C]$. Moreover, we improve 0.68 % in the decreased ratio of the luminous flux.

• 조명전기설비학회논문지
• /
• 제19권5호
• /
• pp.9-16
• /
• 2005

본 연구는 건축조명환경의 광학적 특성에 따라 변화하는 인간의 감성반응을 측정$\cdot$평가하여 조명광원에 대한 감성 데이터 확보에 목적이 있으며, 실제 건축공간에서 활용되는 조명광원을 광학적 특성에 따라 선정한 다음, 조명광원별 감성반응을 측정하여 분석하였다. 연구의 결과를 요약하면, 1) 시기능의 명시성에 있어서 주광색 형광램프가 가장 작업수행도가 높은 것으로 나타났다. 2) 시기능의 피로$\cdot$스트레스에 있어서는, 메탈할라이드 램프와 수은 램프가 부정적인 영향을 주고 있는 것으로 나타났다. 3) 빛의 쾌적성 항목 중 $\ulcorner$밝기가 적당한$\lrcorner$, $\ulcorner$햇빛색에 가까워 보이는$\lrcorner$ 어휘에서는 색온도가 높은 주광색 형광램프가 높은 평가를 받고 있는 것으로 나타났으며, $\ulcorner$눈부심이 있는$\lrcorner$ 어휘에서는 메탈할라이드 램프와 수은 램프가 낮은 평가를 받았다. 4)요인분석 실시 결과, $\ulcorner$촬동성$\lrcorner$, $\ulcorner$역량성$\lrcorner$, $\ulcorner$평가성$\lrcorner$의 3개의 평가축이 추출되었으며, 실내조명공간의 분위기 평가에 있어서 $\ulcorner$활동성$\lrcorner$이 미치는 영향력이 가장 큰 것으로 나타났다. 5) 각 조명광원별 분위기 평가에 미치는 영향에 대해서, $\ulcorner$활동성$\lrcorner$축은 메탈할라이드 램프와 주광색 형광램프, $\ulcorner$역량성$\lrcorner$축은 백열램프류, $\ulcorner$평가성$\lrcorner$축은 주로 색온도가 낮은 형광램프에 의한 영향을 많이 받는 것으로 나타났다.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.669-674
• /
• 2012

Yellow phosphor dispersed color conversion glasses are promising phosphor materials for white LED applications because of their good thermal durability, chemical stability, and anti-ultraviolet property. Six color conversion glasses were prepared with high Tg and low Tg specimens of glass. Luminous efficacy, luminance, CIE (Commission Internationale de l'Eclairage) chromaticity, CCT (Correlated Color Temperature), and CRI (Color Rendering Index) of the color conversion glasses were analyzed according to the PL spectrum. Color conversion glasses with high Tg glass frit, sintered at higher temperature, showed better luminous properties than did color conversion glasses with low Tg glass frit. The characteristics of the color conversion glass depended on the glass composition rather than on the sintering temperature. The XRD peaks of the YAG phosphor disappeared in the color conversion glass with major components of $B_2O_3$-ZnO-$SiO_2$-CaO and, in the XRD results, new crystalline peaks of $BaSi_2O_5$ appeared in the color conversion glass with major components of $Bi_2O_3$-ZnO-$B_2O_3$-MgO. The characteristics of CIE chromaticity, CCT, and the CRI of low Tg color conversion glasses showed worse color properties than those of high Tg color conversion glasses. However, these color characteristics of low Tg glasses were improved by thickness variation. So color conversion glasses with good characteristics of both luminous and color properties were attained.

• 조명전기설비학회논문지
• /
• 제23권12호
• /
• pp.23-30
• /
• 2009

LED조명장치는 자동차분야, 항공, 디스플레이, 전송장치 그리고 특수조명등의 응용장치로의 활용이 증가하고 있다. 일반적으로 고출력 RGB 멀티칩 LED는 표시용이나 경관조명용 또는 감성조명용으로 적용되고 백색 LED는 표시용 조명에서 최근 들어 일반조명용으로 적용되고 있으며, 고출력 백색 LED의 출시와 광효율의 증가는 이를 더욱 가속화하고 있다. 본 논문에서는 백색 LED와 RGB 멀티칩 LED 조명장치를 동일한 사양으로 제작하여 물리적, 전기적, 광학적 조명특성을 분석하여 향후 LED조명시스템의 제작에 정량적 데이터를 제공하고자 한다. 이를 위해 LED의 주요한 물리적 특성인 방열특성에 대한 성능분석, 전기적 특성의 분석을 위한 전력 및 드라이브 효율에 대한 성능분석을 수행하였고 조명특성을 위한 연색성, 배광특성, 광효율을 측정하였다. 백색 LED와 RGB 멀티칩 LED 조명장치를 활용한 응용장치의 적용방법을 확립하고 나아가 다양한 조명시스템에 LED 조명장치를 적용하는데 참고가 되는 기초 데이터를 제시하고자 한다.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.616-621
• /
• 2003

The white-light-emitting organic LED with two-wavelength was fabricated using blue emitting material(DPVBi) and a series of orange color fluorescent dye(Rubrene) by vacuum evaporation processes. The basic structure of white-light-emitting OLED was ITO/NPB(150$\AA$)/DPVBi(150$\AA$)/Alq$_3$:Rubrene(150$\AA$)/BCP(100$\AA$)/Alq$_3$(150$\AA$)/Al(600$\AA$). The changes of the CIE coordiante strongly depended on the doping concentration of Rubrene and the thickness of NPB layer. We obtained the white-light-emitting OLED close to the pure white color light and the CIE coordinate of the device was (0.315, 0.330) at applied voltage of 13V when the doping concentration of Rubrene was 0.5wt% and the thickness of NPB layer is 200$\AA$. At a current of 100mA/$\textrm{cm}^2$, the quantum efficiency was 0.35%.

• 한국전기전자재료학회논문지
• /
• 제14권8호
• /
• pp.679-687
• /
• 2001

It is known that amorphous BaTiO$_3$ thin films have good insulating properties[1][2]. In this investigation, amorphous BaTiO$_3$ thin films were deposited by rf magnetron sputtering on thick BaTiO$_3$ films of AC powder EL devices which were fabricated by screen-printing. The electrical and optical properties of the EL devices were then investigated. Adding amorphous BaTiO$_3$ thin film, it showed that leakage current density was decreased. Especially, leakage current density was decreased more with he sample of 0.5-hour deposition than the sample of 4-hours deposition. This result led to the improvement of luminous efficiency by 11%. It could be concluded that proper amorphous BaTiO$_3$ thin film deposition improved the surface property of dielectric layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.291-291
• /
• 2009

ZnS:Mn/Cu,Cl 계 나노 형광체의 특성을 살펴보았다. 실험에서는 ZnS:Mn 과 ZnS:Cu,Cl 형광체 파우더를 이용하여 밀링을 통하여 분쇄하여 EL 소자를 제작하였다. 형광체 파우더를 볼밀에 $\Phi5mm$의 지르코나이 볼과 에탄올과 함께 넣고 2, 4, 6, 8, 10일간 밀링을 하였다. 밀링한 형광체 파우더를 SEM을 통하여 파우더의 사이즈를 관찰하였다. 또 이 파우더를 이용하여 EL 소자를 제작하였다. 소자의 구조는 기판은 알루미나 기판을, 하부 전극은 Au, 유전체는 $BaTiO_3$ 유전체 페이스트를 사용하였으며, 형광체 적층 후 ITO 전극을 스퍼터를 이용하여 증착하여 제작하였다. 제작한 소자를 이용하여 소자의 휘도 등 발광 특성을 살펴보았다.

• 전기학회논문지
• /
• 제56권7호
• /
• pp.1261-1267
• /
• 2007

Although LEDs have been used in various applications with improving the brightness and luminous efficacy, the electrical and optical characteristics of high power LED varies at different temperature and starting time. In this paper, optimal heat sink and apparatus design were conducted using IR camera and ICEPAK on the LED bulb consisting with fourteen LED array. The temperatures of heat sink and LED device of the designed LED bulb without cooling pan were $74^{\circ}C\;and\;96.8^{\circ}C$, respectively, showing in good themal characteristics. For high efficiency driving circuit of LED array adopted optimal heat sink design, driving circuits of constant voltage and current circuits were suggested and fabricated. As a result the efficacy of all driving circuits showed more than 20 lm/W. Also, the constant current circuits are suitable for signal lamp, hallway lamp, and flash lamp having short operating time(about 30 min). On the other hand, a reading light and indoor lamp having long operating time can be controlled by constant voltage circuit.