• The korean journal of orthodontics
• /
• v.49 no.4
• /
• pp.222-234
• /
• 2019

Objective: To investigate the three-dimensional lip vermilion changes after extraction and non-extraction orthodontic treatment in female adult patients and explore the correlation between lip vermilion changes and incisor changes. Methods: Forty-seven young female adult patients were enrolled in this study (skeletal Class III patients were excluded), including 34 lip-protruding patients treated by extraction of four first premolars (18 patients requiring mini-implants for maximum anchorage control and 16 patients without mini-implants) and 13 patients requiring non-extraction treatment. Nine angles, seven distances, and the surface area of the lip vermilion were measured by using pre- and post-treatment three-dimensional facial scans. Linear and angular measurements of incisors were performed on lateral cephalograms. Results: There were no significant changes in the vermilion measurements in the non-extraction group. The vermilion angle, vermilion height, central bow angle, height/width ratio, and vermilion surface area decreased significantly after the orthodontic treatment in the extraction groups, but the upper/lower vermilion proportion remained unchanged. Significant correlations were found between the changes in incisor position and those in vermilion angles, vermilion height, and surface area. Conclusions: Extraction of the four first premolars probably produced an aesthetic improvement in lip vermilion morphology. However, the upper/lower vermilion proportion remained unchanged. The variations in the vermilion were closely related to incisor changes, especially the upper incisor inclination changes.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.579-589
• /
• 2000

The purpose of this study was to evaluate the position of tongue and hyoid bone in relation to vortical facial patterns in the adult and child. Lateral cephalograms taken in adults(63 cases, 11.7 years in average age) and children(69 cases, 22.6 years in average age) were traced and measured about position and posture of tongue and hyoid bone using the horizontal and vertical reference lines. The angle of mandibular plane to SN Plane was employed to classify the samples into groups of hypodivergent and hyperdivergent. The comparison of the tongue/hyoid bone measurements between hypodivergent group and hyperdivergent group in the adult and child were statistically executed with Student's f-test. The results were as follows, 1. The tongue height was lower in the hyperdivergent group than in hypodivergent group, and higher in children than in adults. 2. The vertical height of hyoid bone was higher in hypodivergent group than in hyperdivergent group and also higher in children than in adults. 3. The anteroposterior position was of no significant difference in relation to age or vortical facial pattern. 4. The inclination of hyoid bone in relation to cranial base was steeper in children than in adults.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.369-379
• /
• 2006

Objective: The purpose of this study was to find changes in the occlusal plane related to different vertical facial patterns and suggest treatment goals and conduct possible treatment mechanisms. Methods: 60 adult patients (28 males, 32 females) who had been diagnosed as Class 1 skeletal malocclusion and treated without extraction were selected. Patients were divided into three groups; short face type (group 1), average face type (group 2) and long face type (group 3), using the data on normal occlusion of Korean adults. Results: The results were achieved by analyzing cephalometric tracings of each group at pre-treatment, end-treatment and post-treatment (about 1 year recall check). The inclination of the occlusion plane tends to gradually increase as the face becomes longer In group 1, COP-X, FOP-X, L6/L1, MP-L6 were significantly decreased, and L1-FOP was significantly increased during the retention period (T3-T2). Group 2 showed no significant change, In group 3, FOP-X was significantly increased during the retention period (T3-T2). During the retention period, FOP-X showed significant change among each group, especially between group 1 and group 3. Conclusion: These results suggest that changes of occlusal plane inclination according to facial vertical pattern need to be considered during the retention period for intrusion, extrusion, and incisor overbite.

• The korean journal of orthodontics
• /
• v.40 no.3
• /
• pp.134-144
• /
• 2010

Objective: The aim of this study was to evaluate the volumes and areas of the upper airways in children with Class II malocclusion, using three dimensional cone-beam computed tomography (CBCT) and to compare the volumetric and cross-sectional measurements and cephalometric variables to investigate possible relationships between the upper airway and facial morphology. Methods: CBCT scans were obtained from 37 subjects (17 boys and 20 girls; average age, 11.02 years). The upper airway volumes and areas were measured, and compared with cephalometric variables. Results: The area of the PNS-posterior plane ($S_{PP}$) was significantly smaller in the Class II malocclusion group (p < 0.05). Also, the volumetric and cross-sectional measurements were lower in Class II than in Class I malocclusion groups, although the differences were not significant between the two groups (p > 0.05). The Class II malocclusion group showed significantly smaller values of PFH, mandibular body length, pog to N perp and showed larger values of FMA, ANB, and facial convexity than the Class I malocclusion group. The volume of the upper airway in front of PNS point (WN) showed negative correlation with ANB (p < 0.05). Conclusions: The Class II malocclusion group had a narrower upper airway associated with a decreased posterior facial height and a divergent growth pattern than the Class I malocclusion group.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.205-218
• /
• 1996

A given facial type can be considered as a syndrome in which various features are aggregated, so a single parameter is not sufficient to accurately identify a given facial type. This study was designed to identify & characterize the skeletal types that blend under the headline-'Cl III,deepbite'. Cephalograms of thirty-four untreated mixed dentition patients, selected mainly on the basis of clinical impression of Cl III with reduced lower face heights were studied. The following conclusion can be drawn. 1. Cl III malocclusion with reduced lower face height could be classified into three types. 2. Subtype 1 was identified by the following features : strong ramus, more anteriorly positioned upper molars without alveolar hypoplasia, acutely reduced Mn. plane angle. 3. Subtype 2 was characterized by a short ramus, sharply reduced postrior alveolar height, and normal Mn. plane angle. In general, this type had hypoplasia tendency in the vertical dimension. 4. In subtype 3, the AUFH occupying more percentage than ALFH was a outstanding feature. Ramal height was in normal range, alveolar hypoplasia and slightly reduced Mn. plane angle was observed. 5. The features of the subtypes were reflected in certain indices, which can be regarded as discriminative index. LAFH: if reduced, regardless of subtypes, indicates reduced lower ant. face height consistently. FHR: when this ratio is increased, it indicates subtype 1. FHI: when this ratio is in normal range, it indicates subtype 2. FPI: if reduced greatly, it indicates subtype 3.

• Korean Journal of Cleft Lip And Palate
• /
• v.6 no.2
• /
• pp.59-67
• /
• 2003

A cephalometric study was performed to reveal differences between skeletal Class III malocclusion patients and cleft lip and palate patients, The material for this study consisted of 16 males (mean age 19.8, range 17-29) and 9 females(mean age 19.4, range 16-27) with cleft lip and palate, and 222 Skeletal Class III malocclusion patients(males 106, females 116), Cephalometric tracing and measurements were done by one investigator. Results were followed: 1. Cleft lip and palate group had more retrusive maxilla than the skeletal Class III malocclusion group. 2, Cleft lip and palate group had smaller effective maxillary and mandibular length than skeletal Class III malocclusion group, and the difference was more prominent in the mandible than in the maxilla. 3. Dental compensation was not observed in the upper incisors of cleft lip and palate group and in the lower incisors it was smaller than skeletal Class III group. 4, In the Gonial angle and lower anterior facial height values, there was no significant difference between cleft lip and palate and skeletal Class III malocclusion group. These results can be used in orthodontic treatment planning and orthognathic surgery for the cleft lip and palate patients.

• The korean journal of orthodontics
• /
• v.8 no.1
• /
• pp.27-37
• /
• 1978

In order to know the variation of the associated craniofacial skeletal angle and linear distance according to the change of gonial angle, the roentgenographic cephalo metric study was undertaken in Korean normal cephalometric analysis and eletric computer. The fallowing results were optained. 1) The size of gonial angle is mainly depend on the lower gonial angle. The mean of upper gonial gngle is almost same in normal occlusion group$^*$ and malocclusion group. 2) It was resulted on normal group and malocclusion group by F test that the number of parameters that were significant at 5% level of confidence were 14 parameters in normal occlusion group and 22 parameters in malocclusion group. 3) Ramus height and mandibular body length increased and facial ratio is decreased as gonial angle decreased. 4) MP-T, overbite depth and Y-axis angle is not related to gonial angle in normal occlusion group, but in moloclusion group, as gonial angle decreased, MP-T and overbite depth is increased and Y-axis angle is decreased. 5) SN-MP, OP-MP, PP-MP is increased as gonial anglel increased, it was mainly depend on the lower gonial angle.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.636-643
• /
• 2000

Facial asymmetry is the most frequent disease in craniofacial deformities. And the primary causing area of that is mostly placing in mandible. That is to say, it is known that primarily, mandible grows excessively or deficiently, and other facial region involving maxilla undergoes compensatory growth secondarily, so asymmetric face develops. In facial asymmetry, the surgical correction of undergrowth is more difficult than that of overgrowth and the reason of it is the postoperative relapse caused by stress of surrounding soft tissues. It means the stress of surrounding soft tissues occurring after bone lengthening and reducing above stress is the same meaning with reducing postoperative relapse. Among various areas, mandibular ramus is the most difficult area to lengthen vertically and maintain its length. The reason of it is considered by many authors as the stress of surrounding pterygomasseteric sling which is enveloping lower border of mandible and interrupting elongation of ramal height. So we applied two different surgical procedures in which pterygomasseteric slings have different stress respectively to monkeys which have similar masticatory function and anatomy to human being and compared relapse by radiographic film and observed periodically the histochemical change of masseteric muscle fiber. So we could see the following results. The relapse was less in EVRO group in which we separated pterygomasseric sling in inferior border and didn't approximate muscle sling after vertical lengthening to minimize the stress of soft tissues than IVRO group in which we elongated ramal height preserving pterygomassetric sling. Of course, we could see a problem in EVRO group such as bone resorption in inferior border caused by uncovering the periosteum of inferior border. But we expect that such problem will be solved by developing periosteum substitutes for covering the exposed bone and minimizing the surgical trauma. In histochemical study of masseteric muscle fiber, the fiber constituents of EVRO group in which we minimized soft tissue stress was changed immediately after operation and maintained it for 1 year, whereas that of IVRO group in which we preserved soft tissue stress was changed in more portion after operation and recovered it by 1 year. By the histochemical results, we can see that the recovery of fiber constituents reflect the recovery of muscle stress and it is closely related with relapse phenomenon.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.155-160
• /
• 2005

The aim of this study is to establish anatomical dimension of the lip in young population in Korean, using specially designed soft ware with photographic image. We measure 13 anatomical dimensions of lips in 2,229 young people. (917 male, 1312 female, Aged from 18-33 years. Average age 19.7). Statistical analysis of these measurements of large population could offer useful information in facial plastic surgery. The mean measurements are as follows 1. Lengths (male/female) Widths of philtrum: $1.11{\pm}0.19cm/1.02{\pm}0.21cm$ Heights of philtrum: $1.6{\pm}0.24cm/1.47{\pm}0.21cm$ Heights of cupid bow: $0.88{\pm}0.16cm/0.83{\pm}0.16cm$ Height of upper vermilion: $0.74{\pm}0.16cm/0.70{\pm}0.15cm$ Height of lower vermilion: $1.08{\pm}0.17cm/1.02{\pm}0.15cm$ Height of upper lip(Rt.): $1.24{\pm}0.2cm/1.23{\pm}0.2cm$ Height of upper lip(Lt.): $1.24{\pm}0.2cm/1.17{\pm}0.19cm$ Half horizontal length of lip: $2.2{\pm}0.26cm/2.11{\pm}0.2cm$ Horizontal length of lip: $4.41{\pm}0.4cm/4.25{\pm}0.36cm$ Height of lower face: $7.1{\pm}0.58cm/6.52{\pm}0.6cm$ 2. Angles Nasolabial angle: $97.77{\pm}11.97^{\circ}/95.5{\pm}11.34^{\circ}$ Mentolabial angle: $133.88{\pm}14.65^{\circ}/129.27{\pm}13.67^{\circ}$ Angle of Cupid's bow: $111.65{\pm}13.99^{\circ}/116.75{\pm}16.2^{\circ}$ Previous reported photogrammetric measurements was difficult to implement to surgical practice. Because these were printed photographies of the same size. Therefore, in this study, we can measure a lot of objects and items more conveniently and correctly by using proportional program on computer after taking a digital photograph. Consequently, proportional measurements with photogrammetry of lip could be useful and corrective substitute for anthropometrical measuring. These data could be useful reference for preoperative consultation, surgical planning and learning anatomical measurement of lips and adjacent structures.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.4
• /
• pp.329-337
• /
• 1993

Improvement of orthognathic surgical techniques make it possible to design esthetic surgical correction for total esthetic face. In order to find the esthetic line which guide esthetic surgical correction in patients of orthognathic surgery, cephalometric soft tissue analysis of esthetic faces were performed. In esthetic Korean young adults, 25 males and 25 females who were within 1 S.D. of E-line, ANB, P/A facial height ratio, were analyzed in natural position keeping their face eye level. 1. Sn position is constant in males and females. The Sn-N'-N' Vertical plane angle is $5.3^{\circ}$ in both sexes. Sn is positioned in front of 5 mm in female 7 mm in male from the N' vertical plane. 2. The Sn-Ls line make constant angle to horizontal plane with $72.5^{\circ}$ in both sexes, which is called "upper esthetic line". The Ls-Pg' line makes constant angle to $72.4^{\circ}$ (range $72.2^{\circ}$ in female to $72.6^{\circ}$ in male), which is called "lower esthetic line". 3. When inter-esthetic line angle (the Sn-Ls line to Ls-Pg' line) has $144.9^{\circ}$, lower third face has esthetic upper and lower lip. 4. In treatment planning, Sn is first corrected in proper position, and then upper and lower esthetic line are established with the angle of 144.9. The maxilla is moved to tangent Ls to the upper esthetic line, and mandible is moved to tangent Li and Pg' to the lower esthetic line, according to the "y"-shaped esthetic lines, then lower third face showes esthetics.