• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.275-280
• /
• 2013

The tractor front axle has the lower standard for noise and vibration relatively and it increase the possibility to develop of the alternative straight bevel gear of the expensive spiral bevel gear. The purpose of this paper is to compare of the spiral vs. the straight bevel gear manufacturing process. The manufacturing cost and productivity are compared after the spiral bevel gear of the tractor front axle is replaced of to the straight bevel gear. If spiral bevel gear is replaced to straight bevel gear, the cost is reduce 4.6% and productivity is increase 18%.

• Journal of Power Electronics
• /
• 제12권3호
• /
• pp.487-494
• /
• 2012

A new low cost high power density photovoltaic power conditioning system (PV PCS) with an energy storage system is proposed in this paper. Its high power density and cost effectiveness can be achieved through the unification of the maximum power point tracker and the battery charger/discharger. Despite the reduced power stage, the proposed system can achieve the same performance in terms of maximum power point tracking and battery charging/discharging as the conventional system. When a utility power failure happens, the proposed system cannot perform maximum power point tracking at the UPS mode. However, the predetermined battery voltage near the maximum power point of the PV array can effectively generate a reasonable PV power even at the UPS mode. Therefore, it features a simpler structure, less mass, lower cost, and fewer devices. Finally, to confirm the operation, validity, and features of the proposed system, a theoretical analysis and experimental results from a single phase AC 220Vrms/1.5kW prototype are presented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.636-642
• /
• 2009

The application of LCC-techniques is being introduced at the on-going procurement programs of various techniques. LCC-techniques have the common characteristic that all are designed to motivate contractors to design, manufacture and deliver equipment with lower life cycle costs. You may believe that savings may be in the acquisition cost component of life cycle costs. However, primary emphasis is generally on reducing and controlling operating and support costs by transferring more responsibility to the contractor for equipment operating and support cost performance. It has been found that life cycle cost procurement provisions must be individually tailored to each program. In this study, the currently identified LCC procurement techniques including a variety of LCC incentive provisions are introduced. Moreover, verification method, a procedural issue and incentive to application of LCC-techniques are examined.

• 무역상무연구
• /
• 제35권
• /
• pp.179-219
• /
• 2007

Cross-border supply chains undergone complexity in the global trade process, unpredictability and continually evolving regulations and information requirements. Under these circumstances, longer lead time inhibiting quick response to market demands, unanticipated supply chain costs eroding product cost savings, compliance and documentation errors causing delays and fines are challenging global trade companies when they execute global business. These problems are mainly caused by unautomated, unintegrated process which lead to longer and more unpredictable lead times, slower cash flow, cost overruns, and ultimately lower profits and less satisfied customers. Complex and unpredictable global trade environment requires global trade companies of global trade management functions to automate and control this complex environment for driving out cost, time and risk from their business. Global trade management allows cost savings, supply chain efficiencies and improved compliance through improving global supply chain visibility, facilitating cash flow by supply chain financing, enhancing supply chain security and risk management.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.319-326
• /
• 2015

In this paper, a cost-effective single switch multi-channel LED (light emitting diode) driver is proposed. While conventional LED drivers require as many non-isolated DC/DC converters as the number of LED channels, the proposed LED driver needs only one power switch and several balancing capacitors instead of expensive non-isolated DC/DC converters. Therefore, the proposed driver features a simpler structure, with a lower cost and a higher efficiency. Because its power switch can be turned off under the zero current switching condition, it has very desirable advantages such as improved electromagnetic interference characteristics and high efficiency. Moreover, it uses only a small number of DC blocking capacitors with no additional active devices for the current balancing of multi-channel LEDs. As a result, the proposed driver exhibits high reliability and is cost effective. To confirm the validity of the proposed driver, a theoretical analysis is performed, and design considerations and experimental results obtained from a prototype that is applicable to a 46" LED-TV are presented.

• Current Optics and Photonics
• /
• 제7권2호
• /
• pp.176-182
• /
• 2023

Optical coherence tomography (OCT) is being developed to guide various ophthalmic surgical procedures. However, the high cost of the intraoperative OCT system limits its availability mostly to the largest hospitals and healthcare systems. In this paper, we present a design and evaluation of a low-cost intraoperative common-path free-hand scanning OCT system. The lensed fiber imaging probe is designed and fabricated for intraocular use and the free-hand scanning algorithm that could operate at a low scanning speed was developed. Since the system operates at low frequencies, the cost of the overall system is significantly lower than other commercial intraoperative OCT systems. The assembled system is characterized and shows that it meets the design specifications. The handheld OCT imaging probe is tested on multilayer tape phantom and ex-vivo porcine eyes. The results show that the system could be used as an intraoperative intraocular OCT imaging device.

• 대한영양사협회학술지
• /
• 제4권2호
• /
• pp.245-253
• /
• 1998

In this study, the food cost for the urban worker's living expenses was estimated for the Korea Labor Union. The urban workers living expenses are minimum of healthy and decency level expenses with allowances for minimum quality of life. Thus, the food cost should be enough for purchasing proper kinds and amount of foods which can supply sufficient nutrient to maintain health and which should reflect current food consumption patterns. To estimate the food cost, the Korean Recommended Dietary Allowances was used to calculate the amount of nutrients which should be supplied. The National nutrition survey and the Food balance sheet, were used to estimate the current consumption patterns for the kind and amount of food. To estimate price for each food item, the market survey was executed in six large cities. Also, to verify the estimated food cost, actual food costs were surveyed. For 5 kinds of model household, dietary allowances were calculated for the each nutrient. Using the Korean food guides, the number of serving for each food group were decided for the model households. In each food group, the amount and kind of foods were decided by the current food consumption pattern. The kind and amount of food were adjusted by the amount of calculated nutrient. When the amount of nutrient was between 90% and 110% of the recommended dietary intake, it was accepted. With these amount and kinds of foods, the food cost were calculated using the market survey. Considering extra expenses for the eating-out and processed foods, extra expenses are added. As a results, for single person family, the estimated food cost was 149,210won per month. For two, three, four and five person family, the estimated food costs were 245,179won, 381,182won, 501,669won and 687,980won per month, respectively. The estimated food cost were lower in the single and two person family than the actual food cost by the survey. The cost for eating-out gave major differences. In the future, to estimate food cost, the food consumption patterns for the different kind of household, sex and age should be studied carefully. Also, the pattern of eating-out should by analyzed.

• Journal of Chest Surgery
• /
• 제47권1호
• /
• pp.20-25
• /
• 2014

Background: Symptomatic or asymptomatic patients with significant carotid artery stenosis (range, 70% to 99%) generally undergo either carotid artery endarterectomy (CEA) or carotid artery stenting (CAS) to prevent stroke. In this study, we evaluated the cost effectiveness of these two treatment modalities. Methods: A total of 47 patients (mean age, $67.1{\pm}9.1$ years; male, 87.2%) undergoing either CEA (n=28) or CAS (n=19) for the treatment of significant carotid artery stenosis were enrolled in this study. Hospitalization costs were subdivided into three parts, namely pre-procedure, procedure and resource, and post-procedure costs. Results: Total hospitalization costs were similar in both groups of CEA and CAS (6,377 thousand won [TW] vs. 6,703 TW, p=0.255); however, the total cost minus the pre-procedure cost was higher in the CAS group than in the CEA group (4,948 TW vs. 5,941 TW, p<0.0001). The pre-procedure cost of the CEA group was higher than that of the CAS group (1,429 TW vs. 762 TW, p<0.0001). However, the procedure and resource cost was higher in the CAS group because the resource cost was approximately three times higher in the CAS group than in the CEA group. The post-procedure cost was higher in the CEA group because hospital stays were approximately two times longer. Conclusion: The total hospitalization cost was not different between the CEA and the CAS groups. The pre-procedure cost was high in the CEA group, but the cost from procedure onset to discharge, including the resource cost, was significantly lower in this group.

• 대한안전경영과학회지
• /
• 제13권3호
• /
• pp.55-61
• /
• 2011

Unit cost for asbestos removal work which have been made out at government contract award for recent three years has been reviewed and shown with table. And the cost have been compared with ones made out by two agencies, American asbestos removal specialists, government ministry for making out comparison tables. First, legal and practical work status survey have been made to determine reasonability of introducing separate contract-awarding system, as a part of ensuring reasonable unit work cost. And then, two different status have been compared and there in introduction possibility of separate contract-awarding system, it is found out. In interior removal work case, it is thought that 50% by owner, 60% unit work cost by the expert of which removal specialist think as reasonable unit cost. the results for exterior and spray work method are shown with almost same context. Impact factors for determining unit work cost such as project mount, project kind, contract-awarding method, subcontract method have been compared with parties. Removal specialist and expert group have almost same ideas for project amount which has been hightestly weighed but owner's recognition has partially lower than specialists idea. There are almost no difference of recognition between three(3) parties for project kind. Idea comparison of reasonable unit work cost for asbestos removal work between three concerned parties has been analyzed and found out that expert group do unit work cost, 65% of which removal specialists estimate, in interior tex removal. And there is almost no difference between them in exterior roof slate removal. But there is considerable difference between them that owner estimates 50% unit cost of specialist one while expert group estimate 50% of specialist idea of unit removal cost.

• 한국수자원학회논문집
• /
• 제44권1호
• /
• pp.1-8
• /
• 2011

본 연구는 패널자료(15개 시도의 20년간 자료)를 이용하여 홍수피해 비용과 복구비와의 상관관계에 대한 분석을 시도하였다. 패널 분석은 자료의 성격에 따라 고정효과모형 또는 확률효과모형을 사용하지만 본 분석은 두 모형을 함께 추정하였다. 예상대로 모든 변수들은 복구비와 정의 상관관계를 보였지만 사망자수와 이재민 수는 유의하지 않거나 오히려 음의 상관관계를 보이기도 하였다. 그리고 공공시설의 피해가 가장 중요한 인자였다. 무엇보다 중요한 것은 우리나라의 경우 복구비가 피해액이나 투자액에 비해 항상 높다는 것이다. 우리나라와는 반대로 일본의 경우 복구비가 가장 낮고 투자비가 가장 높다는 점을 미루어 볼 때 결국 적절한 투자가 향후 홍수피해는 물론 복구비도 낮출 수 있다는 점을 확인할 수 있었다.