• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.1
• /
• pp.55-62
• /
• 2002

The upper wall-lower frame structures(mixed building structures) are usually composed of shear wall structure in the upper part of structure which is used as residential space and frame structure in the lower part of structure which is used as commercial space centering around the transfer system in the lower part of structure. These structures are characteristics of stiffness irregularity, mass irregularity, and vertical geometric irregularity. The purpose of this study is to investigate the nonlinear response characteristics and the seismic capacity of mixed building structures when the number of stories in the lower frame is varied. The conclusions of this study are following. 1) As the result of push-over analysis of structure such as roof drift(i.e. roof displacement/structural height) and base shear coefficient, when the stories of lower frame system are increased, base shear coefficient is decreased, but roof drift is increased. 2) According to an increase in stories of the lower fame, story drift and ductility ratio of upper wall system are decreased and behavior of upper wall system is closed to elastic. 3) When the stories of lower frame system are increased, the excessive story drift is concentrated on the lower frame system.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.464-473
• /
• 2018

The objective of this study is to develop a sizing system of fitness clothing that can properly accommodate various body sizes of Korean senior women. The sizing system of upper and lower fitness clothing was developed in the present study by selection of key variables, identification of size category candidates, and determination of an optimal sizing system. First, key anthropometric dimensions (stature and bust circumference for upper clothing and stature; waist circumference for lower clothing) were identified by factor analysis on the direct body measurements (n = 272) and 3D whole-body scan data (n = 271) of Korean senior women in Size Korea. Second, sizing system candidates based on the key dimensions of upper and lower clothing were explored using a grid method and an optimization method. Lastly, among the sizing system candidates, optimal sizing systems of upper and lower clothing were selected in terms of accommodation rate. Five size categories (short/small, short/medium, tall/small, tall/medium, and tall/large) were selected as the optimal sizing systems of upper and lower clothing with 89% and 78% of accommodation rate, respectively, for the Korean senior women. The anthropometric characteristics of the representative humans of the optimal size categories would be of use in the design of fitness compressive wear for the better fit and effectiveness of exercise and health of Korean senior women.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2887-2890
• /
• 2003

This paper describes the possibility of analyzing gait pattern from the variation of the lower leg electrical impedance. This impedance is measured by the four-electrode method. Two current electrodes are applied to the thigh, knee, and foot, and two potential electrodes are applied to the lateral, medial, and posterior position of lower leg. The correlation coefficients of the joint angle and the impedance change from human leg movement was obtained using electrogoniometer and 4ch impedance measurement system developed in this study. We found the optimal electrode position for ankle, knee and hipjoint movements based on high correlation coefficient, least interference, and maximum magnitude of impedance change. The correlation coefficients of the ankle, knee, and the hip movements -0.87, 0.957 and 0.80. respectively. From such features of the lower leg impedance, it has been made clear that different movement patterns exhibit different impedance patterns and impedance level. This system showed possibility that lower leg movement could be easily measured by impedance measurement system with a few skin-electrodes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.3
• /
• pp.321-331
• /
• 1999

A numerical study is carried out for increasing heat removal using indirect cooling system. Computation is performed for nine cases as variation of flow condition in the lower channel. As the result of this study, water is more effective than air at the same pressure loss in spite of the lower inlet velocity. In channel configuration, the vertical channel is more effective than horizontal channel because of the buoyancy effect. Under the condition that heat generation is the same, counter flow effectively decreases the temperature difference among blocks. Parallel flow is more effective than counter flow when average temperature of all blocks is considered. In the case of installing obstacles in the lower channel, it is desirable to install obstacles in the bottom of lower channel. Heat transfer rate increases as the height of obstacles increases.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.4
• /
• pp.293-299
• /
• 2015

The purpose of this study was to investigate the use of balanced movement system for the elderly and for exercise system and lower body balance satisfaction survey results balance, which improved. Elderly people were using the exercise machine for 9 weeks to improve the most inconvenient lower body balance. We have examined periodically analyze the satisfaction survey items. Elderly people were responding to the satisfaction survey items separated by the lower body balance and movement system. The system used is individual customized exercise was possible and there is an interesting content. As a result shows that maintaining the balance of the user is improved. Also, exercise is thought to be by reducing the discomfort of the lower body will help the elderly in activities of daily living and quality of life.

• The Research Journal of the Costume Culture
• /
• v.16 no.6
• /
• pp.1035-1049
• /
• 2008

The purpose of this study was specifically focused on the lower garment sizing system of adolescent apparel, especially on trousers for adolescent boys. Research Method was performed by using the physical measurements of adolescent boys ($14\sim19$ years old, n=1,344) based on the 'he fifth Korean national physical standard reports' surveyed by SIZEKOREA. The basic materials for this study are obtained from the observations of physical characteristics and classification of physical figures based on the characteristics from waist down. The results from this study are as follows. 1) according to the analyses of physical changes, most items including height, circumference, length, breadth and depth were increased at the age of $14\sim18$ and gradually reduced at the age of 19. 2) The factors which compose the lower body resulted were appeared that the first factor was vertical factor, the second factor was horizontal factor, the third factor was hip length, and the last factor was buttlock-popliteal length. 3) Formalization of physical figures for adolescent boy's lower body analyzed from factors grouped three types. 4) The basic parts that we used to propose the apparel sizing system distinguished by physical figures were Waist Circumference (Omphalion) (every 3cm regular gap) and Hip Circumference (irregular gap). Physical figures assigned 5 to Type T, and 4 to type M. The reference measurement items were divided into 7 items which are correlated with apparel manufacture.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1652-1657
• /
• 2007

Designer must cope with frequent changes in geometric information of automobile suspension module in the early stage of the design process. The authors developed the PSG(Parametric Set Generator) to create parametric models and to change geometric information concerning the lower arm, which is one of the important parts of the automobile suspension module. CAD models provided from the PSG can be utilized to assess fatigue durability via the FE modeling support system. This system provides easy and fast FE-modeling for a static and durability analysis of the lower arm. The PSG and the FE modeling support system are integrated using the e-engineering framework based on the JADE platform. In this study, a durability analysis as a case study for the lower arm manufactured at H company is performed, and the efficiency obtained is discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.743-753
• /
• 2001

This paper proposed the sizing system for womens lower clothes. The sizing system was classified according to 4 body types and 5 age groups. The size intervals of waist girth, hip girth, stature, and slacks length were 3cm, 4cm, 8cm, and 5cm respectively. Frequency distribution analyzed with waist girth, hip girth, and stature showed that the most frequent sizes were 86-100-158 in the fattest-medium length H type, 77-92-158 in the fat-short M type, 68-92-158 in the balanced-long A type, and 65-88-158 in the balanced-medium length A type. The number of the sizes for lower clothes, which had frequencies more than 4∼5%, was 33 and each size was presented with slacks length, skirt length, thigh girth, and knee girth. Also frequency distribution analyzed with waist girth, hip girth, and slacks length showed that the most frequent sizes were 86-100-90 in the fattest-medium length H type, 74-96-90 in the fat-short M type, 68-92-90 in the balanced-long A type, and 65-88-90 in the balanced-medium length A type. The sizing system classified by age group had 21 cases in the early twenties, 21 cases in the late twenties, 18 cases in the early thirties, 16 cases in the late thirties, and 8 cases in the forties. This result will contribute to clothing fitness and efficient production.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.12
• /
• pp.1065-1072
• /
• 2015

This paper is about the development of an insole sensor system that can determine the model of an exoskeleton robot for lower limb that is a multi-degree of freedom system. First, the study analyzed the kinematic model of an exoskeleton robot for the lower limb that changes according to the gait phase detection of a human. Based on the ground reaction force (GRF), which is generated when walking, to proceed with insole sensor development, the sensing type, location, and the number of sensors were selected. The center of pressure (COP) of the human foot was understood first, prior to the development of algorithm. Using the COP, an algorithm was developed that is capable of detecting the gait phase with small number of sensors. An experiment at 3 km/h speed was conducted on the developed sensor system to evaluate the developed insole sensor system and the gait phase detection algorithm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.12
• /
• pp.21-27
• /
• 2012

Korean Industrial Standards for lightning protection system complies with IEC standards. However, the standards are applicable only to buildings and structures more than 20 meters in high. Therefore, it is necessary to determine whether lightning protection system should be installed on structures lower than 20 meters high. This paper proposes an efficient method of assessing risk against lightning of structures lower than 20 meters high. The method suggests simplified lightning protection system and provides selecting an appropriate protection level. The suggested method assumes that structure under assessment has no lightning protection system and there is no person around the structure at the moment of lightning stroke. A simplified method of assessing the risk to human within the structure is developed by adopting the general assessment factor. The selection of a protection level is possible by comparing tolerable risk with physical damage risk caused by a direct lightning. Finally, this paper gives ways to establish surge protection measures when a structure with lightning risk is within a radius of 2km from the assessed structure even if this structure requires no lightning protection system.