• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.49-59
• /
• 2001

Wireless communication systems will be one of the biggest drivers of semiconductor products over the next decade. Global Positioning System (GPS) and Blue-tooth, HomeRF, and Wireless-LNA system are just a few of RF-module candidate awaiting integration into next generation mobile phone. Motivated by the growing needs for lowcost and multi-band/multi-function single chip wireless transceivers, CMOS technology has been recognized as a most promising candidate for the implementation of the future wireless communication systems. This paper presents recent developments in RF CMOS technology so far, much of them have been developed in ETRI, and from them forecasts technology trends in the near future.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1769_1770
• /
• 2009

위치 추정기술은 이동 로봇에 있어 매우 중요한 문제이다. 위치 인식을 위해 사용되는 센서는 고가의 센서일수록 정확한 위치정보를 얻을 수 있지만 원가 절감 등의 이유로 저가의 센서를 사용할 경우 오차가 커지고 신뢰도가 하락한다. 오차를 보상하기 위해 본 논문에서는 센서의 잡음 특성을 세분화 하여 고려한 칼만 필터 기반의 위치 추정 알고리즘을 제안한다.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.2
• /
• pp.137-147
• /
• 2024

This paper presents a novel Long Short-Term Memory (LSTM) network architecture for the integration of an Inertial Measurement Unit (IMU) and Global Navigation Satellite Systems (GNSS). The proposed algorithm consists of two independent LSTM networks and the LSTM networks are trained to predict attitudes and velocities from the sequence of IMU measurements and mechanization solutions. In this paper, three GNSS receivers are used to provide Real Time Kinematic (RTK) GNSS attitude and position information of a vehicle, and the information is used as a target output while training the network. The performance of the proposed method was evaluated with both experimental and simulation data using a lowcost IMU and three RTK-GNSS receivers. The test results showed that the proposed LSTM network could improve positioning accuracy by more than 90% compared to the position solutions obtained using a conventional Kalman filter based IMU/GNSS integration for more than 30 seconds of GNSS outages.

• Korean Journal of Materials Research
• /
• v.19 no.8
• /
• pp.407-411
• /
• 2009

Reflection properties, such as specular reflection and diffuse reflection, are very important optical properties for the reflector, which has high reflectance in the display and architecture industry. Calcite is lowcost, nontoxic, and stable over a wide temperature range. Therefore, it is one of the most widely using fillers in many industries and has some advantages over titania as a filler to improve reflectance. However, optical properties, especially those of ceramic-filled composites, have not been analyzed. We studied the reflectance of calcite composites with their surface roughness. The reflectance of the composites was determined using a UV-visible spectrometer. The surface morphology and the micro-structure of the composites were investigated by atomic force microscope. The reflectance of the composites was improved by increasing the content of calcite in the calcite-frit composite. The reflectance is related with the surface roughness in the composites. However, the reflectance depends on the calcite contents in materials with similar surface roughness.

• Journal of Information Display
• /
• v.12 no.1
• /
• pp.5-10
• /
• 2011

A novel architecture and proprietary electronic inks were developed to provide disruptive digital-media solutions based on an electrokinetic technology platform. The flexible reflective electronic media (eMedia) was fabricated by imprinting three-dimensional microscale structures with a roll-to-roll manufacturing platform. The HP technologies enable the required attributes for eMedia, such as low power, transparency, print-quality color, continuous levels of gray, and lowcost scalability. Pixelation was also demonstrated by integrating with the prototype oxide thin-film transistor backplane, and the system architecture was further developed by stacking primary-colorant layers for color reflective-display application. The innovations described in this paper are currently being developed further for the eSkins, eSignage, and ePaper applications.

• Journal of Korea Multimedia Society
• /
• v.14 no.11
• /
• pp.1450-1457
• /
• 2011

Currently most of leak detection monitoring systems use digital maps with paying royalties, and this increases the cost of system construction and financial burdens on local self-governing bodies that manage such systems. Moreover, they have inefficiencies in repair and maintenance, functional expansion, and compatibility with other systems. Thus, this study developed a waterworks pipe network monitoring system that pursues low cost and high efficiency using general-purpose maps on the Internet such as google maps. As this system uses highly compatible free maps, it costs less in construction and its hardware requirements are lower than existing systems, and consequently, overall monitoring performance is enhanced and the cost of construction goes down sharply. This study also proposed a method for pipeline DB construction, which can be started together with the construction of the monitoring system, in order to improve the field applicability of the system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9B
• /
• pp.760-766
• /
• 2008

As a backbone network, wireless mesh network (WMN) aims to provide reliable high throughput network connectivity to wireless users. Recent research has focused on routing and channel allocation to increase the capacity of wireless mesh backbones. Wireless mesh networking is an attractive solution for home, community, and enterprise networks as it is a self-configuring, instantly deployable, and lowcost networking system. In this paper, we empirically evaluate and analyze charateristic of WMN to establish WMN testbed by measurement. We use laptops and net4826 Soekris board widely used. Soekris boards are equipped with one network interface card (NIC) or above in our measurements. We also use paket generator, routing demon tools and so on. Throughout this measurements, we show limitation of Soekris board and software we use, and suggest guideline to establish WMN.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.865-873
• /
• 2013

The deep drawing and ironing (DDI) process involving the use of a high-capacity horizontal press is used for manufacturing acompressed natural gas (CNG) pressure vessel. However, some variables of the DDI process have been determined based on the experiences of workers, and the short die life needs to be improved for manufacturing the pressure vessel withhighquality and lowcost. In this study, process variables such as the draw ratio, distance between dies, radius of rounding of drawing die, and angle of ironing die are chosen to enhance the reliability and improve the die life based on previous studies and experiences. The draw ratio limits at which no tearing or wrinkling occurs are determined using FEA, and the distances between dies, radius of rounding of drawing die, and angle of ironing die are optimized by the DOE method. The results of the optimal process variables are compared with those of the existing DDI process for verifying their effectiveness.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.6
• /
• pp.89-99
• /
• 2010

Military Barracks and Bachelor Officer's Quarters are public buildings representing architectural characteristics with repeating the same room modules. These buildings require easy dismantling and reusing for the next generation' military re-organization. For these reasons, since 2005, the modular construction has been applied to military buildings. The most important factors required for modular military buildings are standardization, lowcost construction and reusable construction method. However, conventional modular building system have not been matched with these requirements. This study suggests a new modular system for Bachelor Officer's Quarters using Six-sigma design tool. To reflect the voices of customers, market study and surveys were carried out. Through the QFD, the voices of customers were converted into quality characteristics of building system for BOQ. The various design concepts meeting customer's requirement were derived by the QFD and Pugh matrix methodology. The proposed modular building system shows 80% increased factory production rate and 62% decreased weight of steel frame as compared with the conventional modular building system.

• Ocean and Polar Research
• /
• v.35 no.4
• /
• pp.407-414
• /
• 2013

One of the most important challenges facing the Spirulina mass cultivation industry is to find a way to reduce the high production costs involved in production. Although the most commercial medium (Zarrouk's medium) for Spirulina cultivation is too expensive to use, it contains higher amount of $NaHCO_3$ (16.80 g $L^{-1}$), trace metals and vitamin solutions. The purpose of this study was to increase the efficiency of Spirulina platensis biomass production by developing a low-cost culture medium at an isolated tropical island such as Chuuk State, Federated States of Micronesia (FSM). This study set out to formulate a lowcost medium for the culture of S. platensis, by substituting nutrients of Zarrouk's medium using fertilizer- grade urea and soil extract with a different concentration of carbon source under natural weather condition. In order to select a low-cost culture medium of S. platensis, 10 culture media were prepared with different concentrations of nitrogen (urea and $NaNO_3$) and $NaHCO_3$. The highest maximum specific growth rate (${\mu}max$) and mass production were 0.50 $day^{-1}$ and 1.05 g $L^{-1}$ in modified medium ($NaHCO_3$ 7.50 g $L^{-1}$, urea 2.00 g $L^{-1}$ without $NaNO_3$) among all the synthesized media. Protein (56.14%) and carbohydrate (16.21%) concentrations of the lyophilized standard samples were estimated with highest concentration of glutamic acid (14.93%). This study revealed that the use of a low concentration of urea and $NaHCO_3$ with soil extract was an affordable medium for natural mass cultivation in the FSM.