• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.1-12
• /
• 2015

PURPOSES : This paper presents a description of the current issues facing road managers regarding the surface-type conversion of low-volume roads for cost savings. METHODS: The paper reviews previous works conducted toward this end, acknowledges gaps in the current research, and lays out what information is needed for further studies. RESULTS : If the cost to maintain an unsurfaced road is less than the cost of maintaining a surfaced road, then there is potential for cost savings for the management agency. However, the problem is bigger than simply maintaining the roads that already exist. If unsurfaced roads prove to be more economical than surfaced roads, then the cost to convert from a surfaced to an unsurfaced roadway, and vice versa, when necessary, must also be examined. CONCLUSIONS : No other studies have addressed the un-surfacing of a road for cost savings, and it is therefore unknown whether substantial savings can be realistically obtained by converting from a surfaced to an unsurfaced road. To determine whether a conversion policy would be a viable option, additional data and research are needed.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.5
• /
• pp.631-636
• /
• 2009

This study has its intention to investigate the water quality of non-point source which is runoff from roads. We have classified and selected twelve sites as city road, industrial road, national road and mountain road by considering their traffic volume and surroundings. Water quality was analyzed based on BOD, COD, SS, T-N and T-P and the concentrations were measured by sampling after rainfall with the interval of 10 minutes, 20 minutes, and 30 minutes. BOD was the highest in city road with 57.6 mg/L and the lowest in mountain road with 45.0 mg/L. For COD, the highest concentration in industrial road was 146.5 mg/L and the lowest was in mountain road with 98.0 mg/L. The run off concentration of SS was up to maximum 630.0 mg/L (average 280.4 mg/L) which was remarkable compared to other types of road. It showed its lowest concentration in national road with 76.0 mg/L. T-N and T-P were the highest in industrial road and the lowest in mountain road. We found out that the runoff concentration was high with large amount of traffic volume and it seemed to be high in city road and industrial road where they were largely affected by their surroundings. Relatively, national road and mountain road seemed to show low concentration as they have less traffic volume and less affected by their surroundings.

• Korean Journal of Environment and Ecology
• /
• v.28 no.5
• /
• pp.516-522
• /
• 2014

This study was conducted to investigate the impact of the anthropogenic factors affecting distribution of the Red-crowned Crane and White-naped Crane wintering in Cheorwon, Korea. Especially, it was investigated that the impact power and its range of the anthropogenic effect to the feeding flock density in cranes due to the paved road, residential area, military facilities and greenhouse density. The Red-crowned Crane and the White-naped Crane showed the similar preference and sensitivity against anthropogenic factors, because correlation of feeding flock density of the Red-crowned Crane and White-naped Crane was similar in the same site. The feeding flock density of the cranes near the residential area was lower than that of area far from the area, and tended to increase within 2.5 km distance. The increasing tendencies of feeding flock density from military facilities and high traffic volume road were similar, but the density in military facilities increased within 0.8 km, and the density from high traffic volume road increased within 2 km. This results suggested that military facilities and the road with high traffic volume made significant influence on foraging densities to the certain range. As the distance from the road with low traffic volume increased, feeding flock density tended to decrease. The area near the low traffic volume road had high feeding flock density because remaining rice grains were preserved by intermittent disturbances in that area. If the density of greenhouse is lower than $40/km^2$, feeding flock density in the low greenhouses density area was higher than high greenhouses density area. However, there was no difference in the feeding flock density if the density of the green houses is higher than $40/km^2$.

• Journal of Environmental Health Sciences
• /
• v.34 no.5
• /
• pp.395-402
• /
• 2008

Road traffic noise causes considerable disturbance and annoyance in exposed inhabitants. Particularly, arterial road noise is a significant environmental problem in many urban areas in which higher traffic volume and higher car speed occur. Arterial road noise became the target of this investigation in Seoul, South Korea. Noise levels were measured at four points that were based on distance from roadside at the same measurement site and under the conditions as reported by the National Institute of Environmental Research (NIER) in 1999. The average noise levels ($L_{eq,1h}$) of the arterial road was 80.3 dBA at 5 m, 77.4 dBA at 10 m, 73.7 dBA at 20 m, 70.9 dBA at 30 m. A comparison between 1999 and 2008's measurement values has shown that in 2008 noise level is up by about 1.5 dBA, traffic volume has increased by about 15.7%, while car speed has decrease by about 8%. The relationship between 2008' measured values and predicted values using the NIER Equation is low under 10 m from the roadside. The influence range of arterial noise is calculated at 26 m for road noise limits in daytime. In relation to the comparison between traffic volume and noise level, the equivalence in traffic volume (Light car+10xHeavy car) is higher than other variables.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.6
• /
• pp.616-622
• /
• 2000

This paper concerns the application of smoke and fire spread to road tunnel fire problems. When a road tunnel is on fire. a fire protection system of road tunnel have to offer an adequate escape space to human. Therefore, this study carried out a simulation for predicting a spreading path of smoke and fire. The evolution of the flow field is simulated with the low Reynolds number k-$\varepsilon$ turbulent model and SIMPLE algorithm based on the finite volume method.

• Journal of Environmental Health Sciences
• /
• v.18 no.2
• /
• pp.19-25
• /
• 1992

The study was carried out to investigate the correlation between the heavy metals emitted by the motor vehicles with the heavy traffic road side environment (soil, leave, bark, ambient air). The Pb, Cu, Zn contents in road side soil sand leaves, barks from Ginkgo, biloba and ambient air adjacent to the heavy traffic road side from June to August, 1992 Suwon city were analyzed by Atomic absorption spectrometry and Inductively coupled plasma emission spectrophotometry. The results were as follows: 1) The high levels of heavy metals concentration were Pb, at city-terminal in soil (186 $\mu$g/g), Cu, at city-terminal in soil (221 $\mu$g/g), Zn, at city-terminal in ambient air (252 $\mu$g/m$^{3}$). 2) The low leves of heavy metals concentration were Pb, at North-gate in ambient air (1.65$\mu$g/m$^{3}$), Cu, at North-gate in ambient air (4 $\mu$g/m$^{3}$), Zn, at North-gate in ambient air (15.31$\mu$g/m$^{3}$). 3) The regional distribution of Pb, Cu, Zn in road side soils, leaves and barks from Ginkgo, biloba, ambient air show high levels in turn, city4erminal, Guan Sean Dong, South gate, North gate. 4) The concentration of heavy metals (Pb, Cu, Zn) in soils, leaves, barks, ambient air was highly correlated with the traffic volume of the sampling sites (r=0.64~0.96). To conclude that the high levels of Pb, Cu, Zn contaminations were positively related to motor vehicles-borne pollutants and road side soils, trees, ambient air adjacent to a high density building area with low road coverage and heavy traffic volume were reflected strongly by the hazardous pollutants emitted by motor vehicles.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.4
• /
• pp.137-146
• /
• 1996

This paper presents the results of field experience from an experimental pavement construction on a low volume road using recycled concrete. The recycled concrete was prepared by replacing a half of coarse aggregate with recycled aggregate. Virgin natural sand was used as fine aggregate together a plasticizer and a fly ash (0.8% and 5% by wt. of cement, respectively). The load bearing capacity of the subbase made of recycled aggregate was acceptable. The length, thickness and width of the pavement were l00m, 20cm and 3m, respectively. From construction experience, it was found that workability and finishability of the recycled concrete mixture were relatively poor, but strengths were satisfactory. Flexural strength, compressive strength and elastic modulus at 28 days were 54Kg/$cm^2$, over 250Kg/$cm^2$, and 220,OOOKg/$cm^2$, respectively. The construction could be performed by hand without much difficulty. The surface was finished smoothly by wet fabric and only minor cracks were found on the surface.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.388-393
• /
• 1996

This study evaluated characteristics and performance of recycled concrete as a pavement which was constructed on a low volume road. The recycled concrete was prepared by replacing a half of coarse aggregate with recycled aggregate. Natural sand from a source was used as fine aggregate together with admixtures such as plasticizer and fly ash (0.8% and 5% by wt. of cement, respectively). The length, thickness and width of the pavement were 100mm, 20cm and 3m, respectively. From construction experience, it was found that workability and finishability of the recycled concrete mixture were relatively poor, but strengths were satisfactory. Flexural strength, compressive strength and elastic modulus at 28 days were approximately 45Kg/$\textrm{cm}^2$, 250Kg/$\textrm{cm}^2$, and 240,000 Kg/$\textrm{cm}^2$, respectively. The pavement could be constructed by hand without much difficulty. The surface was finished smoothy by wet fabric and only minor cracks were found on the surface.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.11-24
• /
• 2016

OBJECTIVES : This study aims to review a plan to reduce the shoulder width of a deformed round-trip two-lane highway with low traffic volume. METHODS : Installation of a passing lane on a round-trip two-lane (one-way one-lane) highway, and reduction of a shoulder for a round-trip four-lane highway. RESULTS : It is necessary to establish a design criterion for various highways, because the plan to reduce the lane or shoulder width of a highway with low traffic volume was analyzed to have an economic efficiency of 6.8~7.0%. CONCLUSIONS : It is necessary to seek for a plan to establish a national trunk net early by efficiently using the limited financial resources to cope with the traffic demand elastically.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.49-56
• /
• 2016

PURPOSES : In this study, noise reduction effect of a two-layer porous asphalt pavement was investigated through site measurement and computer simulation. METHODS : To examine noise reduction effect, a 3 km long quiet pavement was installed by removing previous normal pavement, which had a rather low porosity. The studied site was a high-rise apartment building surrounded by the quiet pavement and Seoul ring road with heavy traffic volume, indicating relatively high background noise. RESULTS : The measurement result before and after installing the quiet pavement showed a noise reduction effect of 4.3 dB(A) at a distance of 7.5 m from the road. After validating the accuracy of simulation using SoundPLAN, the reduction in SPL(sound pressure level) at the facades by the quiet pavement was predicted by considering five different road conditions generating traffic noise from each road or in the combination of the quiet pavement and Seoul ring road. In the case of no noise from Seoul ring road, noise reduction at the facades was 4.2 dB(A) on average for 702 housing units. With background noise from Seoul ring road, however, the average SPL decreased to 2.0 dB(A). Regarding subjective response of noise, the number of housing units with a noise reduction of over 3 dB(A) was 229 out of 706 units (approximately 32%). For 77 housing units, the noise reduction was between 1~3 dB(A), while it was less than 1 dB(A) for 400 housing units. CONCLUSIONS : The overall result indicates that the quiet pavement is useful to reduce noise evenly at low and high floors compared to noise barriers, especially in the urban situation where background noise is low.