• Korean Journal of Food Science and Technology
• /
• v.3 no.3
• /
• pp.178-184
• /
• 1971

Samples of refined soybean oil were irradiated with lights from a 20-watt incandescent tungsten lamp, a 20-watt fluorescent daylight type lamp, a 20-watt low-pressure mercury vapor germicidal lamp, and direct sunlight for an experimental period of 147 days. Some samples were stored in a dark room throughout the period as a control. The peroxide values of all samples were measured every week. The induction period of the samples was arbitrarily taken as the time required for the samples to reach a peroxide value of 15. The induction period of the control was estimated at 198 days. Those of the samples irradiated with the incandescent light, the fluorescent light, the ultraviolet light, and the sunlight were estimated at 196, 119, 52 and 6 days, respectively. The sunlight showed by far the strongest prooxidant activity whereas the incandescent light showed the weakest but distinct prooxidant activity. The small temperature differences observed among the various samples throughout the experimental period did not seem to affect the oxidation rates of the irradiated samples in any significant way.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.4
• /
• pp.330-339
• /
• 1993

To optimize the processing conditions of fermented ascidian, Halocynthia roretzi, fermentation at low temperature with different salt contents, the effect of enzymes added, and the quality changes during fermentation were investigated. As the quality factors, changes in such components as free amino acid, volatile basic nitrogen(VBN), amino nitrogen, total creatinine, total carotenoid, extents of browning, reducing sugar and glycogen were determined. The quality was also evaluated organolatically by pannel test. Fresh deshelled and sliced ascidian were fermented for 50 days at $5{\pm}1^{\circ}C$ with different salt contents of 5, 10, $15\%$ (w/w) with enzyme contents of papain $0.1\%$ and protease-A $0.1\%$ VBN increased gradually during the 50 days of fermentation and showed $30{\sim}40mg/100g$ at 30, 35 and 45 days in case of salt contents 5, 10 and $15\%$ added with $0.1\%$ papain and protease-A, respectively. Amino nitrogen and the total creatinine increased until 20 days, hereafter tended to decrease gradually. Total carotenoid and glycogen also decreased during the fermentation. The results of sensory evaluation of fermented ascidian at $5{\pm}1^{\circ}C$ added $0.1\%$ papain or protease-A showed that the peculiar taste and flavor of ascidian was sustained for $30{\sim}40$ at least 20 days with $5\%$ NaCl and $35{\sim}45$ days of fermentation with 10 and $15\%$ NaCl.

• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.239-244
• /
• 2020

Effect of 6kg large unit with the carton box (20% open ratio) and MA box (10,000cc·m^-2·day^-1·atm^-1 oxygen transmission rates modified atmosphere package), and the 100g small unit with MA film on asparagus sensory quality were evaluated. The CO₂ concentration depended largely on the packing unit and maintained at around 3% in small MA packages, whereas in the MA box increased to 12%. Ethylene concentration rapidly increased until after 3 days of storage in MA packages and then decreased to maintain 5μL·L^-1. Unrelated to the unit size, the lower weight loss was obtained in MA packages. A significant difference in visual quality was shown since the 15th day, the best and worst were the MA box and small MA package on the finish day. Off-odor was the highest in small MA packages and the lowest in the carton box (< 3.0). Although there was no significant difference in firmness among all treatments, the packages showed the highest firmness in tips and stems, respectively. The sugar content and hue angle decreased during storage, but there was no statistical difference in all treatments. EL was lowest and highest in small MA package and carton box, respectively. On the 10th day, the total aerobic bacteria was lowest in small MA packages, but no significant difference on the 20th day. E. coli was not found in all treatments on the 10th day, while it was the lowest in the MA box on the 20th day. The mold and yeast were not observed during the whole storage. Based on the above results, the carton box packaged with 10,000cc OTR film was more effective in maintaining the quality of green asparagus with the suitable CO₂ concentration for asparagus cold storage.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.891-897
• /
• 2017

Apple (Malus domestica) is a climacteric fruit because of its high respiration and ethylene production. Ethylene affects the fruit by decreasing its quality and storability. Md-ACS1 and Md-ACO1 genes are involved in ethylene biosynthesis in apple; the Md-ACS1-2 and Md-ACO1-1 alleles are associated with low ethylene production. We conducted an analysis to study Md-ACS1 and Md-ACO1, and to examine ethylene production and softening rate of fruit at room temperature ($20^{\circ}C$) storage in 'Fuji (FJ)', 'Golden Supreme (GS)', and 5 cultivars of Korean apples ('RubyS (RS)', 'Hongro (HR)', 'Arisoo (AS)', 'Summer King (SK)', 'Greenball (GB)'). The result showed that an increase in the number of the alleles (ACS1-2, ACO1-1) decreased the ethylene production and softening rate. The presence of ACS1-1/1, ACO1-1/2 was confirmed in GS and the highest ethylene production and softening rate was observed. Ethylene production and softening rate of SK and GB expressing ACS1-1/2, ACO1-1/2 were higher than that of HR and AS, expressing ACS1-2/2, ACO1-1/2, but lower than GS. FJ with ACS1-2/2, ACO1-1/1 showed the lowest ethylene production and softening rate among all cultivars except RS. The Md-ACS1 and Md-ACO1 DNA markers could potentially be used to estimate storability and applied in marker assisted selection the improve the efficiency of apple breeding.

• Korean journal of food and cookery science
• /
• v.21 no.3 s.87
• /
• pp.339-345
• /
• 2005

This study was carried out to determine the changes of chlorophyll contents in spinach during growth stages and storage with two packaging materials. The chlorophyll contents increased to a maximum level in the spinach leaves after 35 days of planting, while the level in the roots extremely decreased and that in the stems did not change during the growth period. The total chlorophyll content was higher in the leaves than that in the stems and roots. The ratios of chlorophyll a/b in the leaves and stems were almost similar to those reported for spinach elsewhere. When stored for 1, 3, and 5 days without packaging, the remaining percentage of chlorophyll was $96.29\%,\;90.79\%\;and\;85.74\%$, respectively, at $5^{\circ}C,\;and\;82.75,\;44.63,\;33.07\%$, respectively, at $20^{\circ}C$. The chlorophyll contents of the spinach stored in polyethylene bags were significantly higher than of that those without packaging and of that packaged with newspaper during storage. From the results, it was found that spinach packaged in polyethylene bags suppressed the degradation of chlorophyll and maintained the freshness during low temperature storage and that the chlorophyll contents increased during the growth period.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.382-388
• /
• 1994

Because of its restrictive harvest from spring to summer, It is necessary to preserve raw ascidians, Halocynthia roretzi, for the purpose of processing regardless of season. We evaluated low Temperature tolerance of ascidian and conditions for cold storage to secure the quality of the stock. To retard the browning of meat rapidly occurred after sucking, ascidians were blanched for 10 seconds in 10% boiling salt solution or dipped for 60 seconds in 0.2% $NaHSO_3$ solution, respectively. The samples were stored in ice, at $-17^{\circ}C$ or $-35^{\circ}C$ for 85 days, respectively. Changes in VBN, glycogen, brown pigment formation, total carotenoid, nucleotides and their related compounds during the storage were determined, and sensory evaluation of quality was also practiced. VBN and brown pigment formation were rapidly increased. Glycogen was gradually decreased and then not detectable after 85 days in case of ice storage. Lipophilic brown pigment was higher than hydrophilic and rapidly increased during storage. The result of sensory evaluation showed that the ascidian treated in 0.2% $NaHSO_3$ was good for 85 days of storage at $-35^{\circ}C$ . Judging from the results of chemical experiment and sensory evaluation, the quality of ascidian treated in 0.2% $NaHSO_3$ and stored at $-35^{\circ}C$ was better than that of other samples.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.263-275
• /
• 2014

It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.471-490
• /
• 2016

This study investigated provenance of raw materials and making technique of lime-based materials used in the tomb barriers of the Yesan Mokri tombs from Joseon dynasty on the basis of analysis to material characteristics and physical properties. In the barrier materials, dry density and porosity are the highest value ($1.82g/cm^3$) and the lowest value (25.20%) in the south wall of No. 1 tomb, respectively. Dry density and porosity are inversely proportional in all barrier materials, but unconfined compressive strength, which is the highest value of $182.36kg/cm^2$ in the No. 2 tomb, does not show an interrelation with porosity and density. Mineral components in the lime-soil mixtures of the tomb barrier are mainly quartz, feldspar, mica and calcite about 200 to $600{\mu}m$ size with yellowish brown matrix. Hydrotalcite and portlandite are detected in the lime mixture, and kaolinite in the soils. The lime materials of the tomb barrier occurred in large quantities weight loss and variable endothermic peaks caused by decarbonization reaction of $CaCO_3$ in the range from 600 to $800^{\circ}C$ in thermal analysis. Making temperature of lime for the tomb barrier is presumed approximately about $800^{\circ}C$ based on the occurrences, compositions and thermal analysis. The tomb barriers are revealed to very wide composition ranges of major elements and loss-on-ignition (22.5 to 33.6 wt.%) owing to mixture of the three materials (lime, sand and clay). It is interpreted that low quality construction technique was applied as the limes are very heterogeneous mixture with aggregates, and curing of the lime was poorly processed in the tomb barriers. Possible limestone sources are distributed in many areas around the Mokri site where limestone conformation and quarries for commercial production are found within Yesan and Hongseong areas. Therefore, we estimated that raw materials were possibly supplied from the local mines near the Mokri site.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.1
• /
• pp.41-51
• /
• 1999

This study was conducted to investigate the effects of local climatic conditions on the annual increment of Korean white pine planted in Gapyung and Yaungdong. For this, stand variables such as mean DBH, mean height, basal area per hectare, and volume per hectare by stand age were measured and summarized for each locality. Based on these statistics, annual increments for 8 years from stand age 10 to 18 were calculated for each of stand variables. A topoclimatological technique which makes use of empirical relationships between the topography and the weather in study sites was applied to produce normal estimates of monthly mean, maximum, minimum temperatures, relative humidity, precipitation, and hours of sunshine. Then, the yearly climatic variables from 1990 to 1997 for each study site were derived from the spatial interpolation procedures based on inverse- distance weighting of the observed deviation from the climatic normals at the nearest 11 standard weather stations. From these estimates, 17 weather variables such as warmth index, coldness index, index of aridity etc., which affect the tree growth, were computed on yearly base for each locality. The deviations of measured annual increments from the expected annual increments for 8 years based on yield table of Korean white pine were then correlated with and regressed on the yearly weather variables to examine effects of local climatic conditions on the growth. Gapyung area provides better conditions for the growth of Korean white pine in the early stage than Youngdong area. This indicates that the conditions such as low temperature, high relative humidity, and large amount of precipitation provide favor environment for the early growth of Korean white pine. A ccording to the correlation and regression an analysis using local climatic conditions and annual increments, the growth pattern of Gapyung area corresponds to this tendency. However, it was found that the relationship between annual increments and local climatic conditions in Youngdong area shows different tendency from Gapyung. These results mean that the yearly growth pattern could not sufficiently be explained by climatic conditions with high variance in yearly weather variables. In addition, the poor growth in Youngdong area might not only be affected by climatic conditions, but also by other environmental factors such as site quality.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1046-1054
• /
• 2001

Effects of B$_2$O$_3$and CuO addition on the microwave dielectric properties of the PbWO$_4$-TiO$_2$ceramics were investigated in order to use this material as an LTCC material for fabrication of a multilayered RF passive components module. We found that PbWO$_4$could be used as an LTCC material because of its low sintering temperature (8$50^{\circ}C$) and fairy good microwave dielectric properties($\varepsilon$$_{r}$=21.5, Q$\times$f$_{0}$=37200 GHz and $\tau$$_{f}$ =-31 ppm/$^{\circ}C$). In order to stabilize $\tau$$_{f}$ of PbWO$_4$, TiO$_2$was added to the PbWO$_4$and the mixture was sintered at 8$50^{\circ}C$. A near zero $\tau$$_{f}$ value (+0.2 ppm/$^{\circ}C$) was obtained with 8.7 mol% TiO$_2$addition. $\varepsilon$r and Q$\times$f$_{0}$ values were 22.3 and 21400 GHz, respectively. It was believed that the decrement of Q$\times$f$_{0}$ value with TiO$_2$addition was resulted from increasing grain boundary. In order to improve Q$\times$f$_{0}$, various amounts of B$_2$O$_3$and CuO were added to the 0.913PbWO$_4$-0.087TiO$_2$mixture. The optimum amount of CuO was 0.05 wt%. At this addition, the 0.913PbWO$_4$-0.087TiO$_2$ceramic showed $\varepsilon$$_{r}$=23.5, $\tau$$_{f}$ =-2.2ppm/$^{\circ}C$, and Q$\times$f$_{0}$=32900 GHz after sintered at 8$50^{\circ}C$. In case of B$_2$O$_3$addition, the optimum amount range was 1.0~2.5 wt% at which we could obtain following results; $\varepsilon$$_{r}$=20.3~22.1, Q$\times$f$_{0}$=48700~54700 GHz, and $\tau$$_{f}$ =+2.4~+8.2ppm/$^{\circ}C$.