• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.3
• /
• pp.180-184
• /
• 2007

Bluetooth is a standard for short range, low power, low cost wireless communication that uses radio technology. This paper presents an overview of Bluetooth communication the following article will focus on the formation of Bluetooth scatter nets and some proposed scatter net models.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.89-94
• /
• 2018

This paper investigated the design method of the smart sensor for implementing IoT (Internet of Things) service. The power supply of sensor consistently acquisting data is based on the energy harvesting technology and designed with piezoelectric transducer not affected by surrounding circumstances. The wireless communication interface for the transmission of data is designed with BLE (Bluetooth Low Energy). BLE is highly adequate wireless communication technology for low power consumption and short distance wireless communication. The main application of BLE is beacon whose usage range is extended from O2O (Online to Offline) service, navigator based on indoor positioning technology, and anti-theft/lost child prevention service to mobile game. This paper studied the method to extend wireless coverage for complementing the short wireless transmission distance of BLE. The wireless sensor network based on CATV network is proposed for the easy construction of BLE sensor network and extended wireless coverage.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.98-101
• /
• 2019

In this paper, we propose the power-based pipelined-forwarding MAC protocol which can select relay nodes according to the residual power and energy harvesting rate in EH-WSN (energy-harvesting wireless sensor networks). The proposed MAC follows a pipelined-forwarding scheme in which nodes repeatedly sleep and wake up in an EH-WSN environment and data is continuously transmitted from a high-level node to a low-level node. The sleep interval is adaptively controlled so that nodes with low energy harvesting rate can be charged sufficiently, thereby minimizing the transmission delay and increasing the network lifetime. Simulation shows that the proposed MAC protocol improves the balance of residual power and network lifetime.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.9
• /
• pp.602-606
• /
• 2015

This paper presents a ZigBee wireless communication system for remote diagnosis in overhead distribution power lines. The system is divided in three parts in the functional aspect - a host computer module, a remote controller module and a diagnostic system module. The host computer module designed as USB interface transmits control signals and receive data measured by sensor. The remote controller module operates the diagnostic system. Diagnostic system module communicates with internal main controller and host computer USB. Multiple communication channel is adopted for simultaneous operations of several diagnostic system. Dedicated protocol for each module is developed. The system is designed with a focus on low cost and small size suitable for lightweight and small diagnostic system.

• Smart Media Journal
• /
• v.3 no.1
• /
• pp.28-32
• /
• 2014

It is practical nowadays to automate data recording in order to prevent loss and tampering of records. There are existing technologies that satisfy this needs and one of them is wireless sensor networks (WSN). Wireless body sensor networks (WBSN) are wireless networks and information-processing systems which are deployed to monitor medical condition of patients. In terms of performance, WBSNs are restricted by energy, and communication between nodes. In this paper, we focused in improving the performance of communication to achieve less energy consumption and to save power. The main idea of this paper is to prioritize nodes that exhibit a sudden change of vital signs that could put the patient at risk. Cluster head is the main focus of this study in order to be effective; its main role is to check the sent data of the patient that exceeds threshold then transfer to the sink node. The proposed scheme implemented added a time-based protocol to sleep/wakeup mechanism for the sensor nodes. We seek to achieve a low energy consumption and significant throughput in this study.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.108-112
• /
• 2021

For smart mobile devices, the wireless communication module is one of the hardware modules that consume the most energy. If we can build a multi-channel multi-interface environment using heterogeneous communication modules and operate them dynamically, data transmission performance can be highly improved by increasing the parallelism. Also, because these heterogeneous modules have different data rates, transmission ranges, and power consumption, we can save energy by exploiting a power efficient and low speed wireless interface module to transmit/receive sporadic small data. In this paper, we propose a power efficient data transmission method using heterogeneous communication networks. We also compared the performance of our proposed scheme to a conventional scheme, and proved that our proposed scheme can save energy while guaranteeing reasonable data delivery time.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.200-204
• /
• 2007

The release of IEEE 802.15.4 PHY-MAC standard represents a milestone in developing of commercial wireless sensor network pursuing low power and low cost. In this paper, IEEE 802.15.4 Medium Access Control (MAC) protocol was analysed at the point of power consumption. This analysis measured the amount of the rest of power after transmitting data with beacon enabled mode and the power consumption of each node in the time period. ns-2 simulation is used to verify the analysis.

• Journal of Korea Multimedia Society
• /
• v.21 no.6
• /
• pp.649-658
• /
• 2018

In this paper, we propose a mechanical contact inner tap inspection system that can inspect the defect of the inner tap immediately after inner tap is processed within the machining center. The inspection module has the collet chuck structure, so it can mounted on the main spindle of the machining center during inspection. It was developed with a focus on inspection for tap having 20 mm depth which is primarily fabricated in automotive parts and has a double sided PCB-type control system including sensing function based on Zigbee module, micom and IR sensor for wireless transmission of measured data with low power operation, and also a battery for supplying electric power. The current consumption is 46.8mA in the inspection operation mode and 0.0268mA in the power saving mode for 3.7V of the applied power source, so that 30,000 times or more inspection can be performed with assumed 5 seconds inspection time for one tap. Experiments in test jig system and actual machining center confirm that the proposed inner tap inspection system can be applied to the batch process of simultaneous inspection after tapping in the machining center.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.290-292
• /
• 2009

With advance in technologies for wireless sensor networks(WSNs), 2.4 GHz band has become gradually attractive due to increase in low-power wireless communication devices. Especially ZigBee(IEEE 802.15.4-based) technology whose frequency band includes the 2.4GHz industrial, scientific and medical band providing nearly worldwide availability has been universally applicable to a various remote monitoring system and applications related home network system. However network throughput of these systems is significantly deteriorated due to this ISM band is a license-exemption used in a variety of low-power wireless communication devices. For instance, other IEEE 802 wireless standards such as Bluetooth, WLAN, Wi-Fi and others cause radio interference to ZigBee. The experiments was carried out to analyze radio frequency interference between heterogeneous devices using ISM bands to improve the limited frequency utility factor. Finally this paper suggests a frequency hopping-based adaptive multi-channel methods to decrease interference with empirical results.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.609-614
• /
• 1999

Our present ability to work with video has not been confined to wired communication environment. This paper describes the new technological trend of wireless video communication. In wireless video communication, unlike wired network, several techniques are needed. At first, error robust video coding is essential. Due to characteristics of wireless channel, the system is exposed to more error prone environment. In addition, encoded video bit streams are vulnerable to the error because of the entropy coding. Recently many frameworks are developed to cope with this problem. We just explore the numerous robust video coding approaches with the viewing of error control. And more we discuss other on going research topics in this wireless video communication fields like low-power assumption design, trans-codec technique, and rate control schemes in brief.