• Korean Journal of Environment and Ecology
• /
• v.5 no.1
• /
• pp.79-90
• /
• 1991

This study was conducted to investigate seasonal avifauna and to suggest a proper way how to manage and protect wild birds in Chirisan National Park. The survey was carried over 3 main trail districts by line transect method to figure out influence factor of inhabitation of wild birds from February to November in 1991. The study results are as follows : The observed birds were belong to 6 orders 24 families 49 species and 981 individuals and Falco tinnunculus(Natural monument No. 323). These birds also classified into 24 species for residents, 12 species for summer visitor. 9 species for winter visitor, 4 species for passage migrant, respectively. The observed average frequeney of birds was 2.09e.a./ha, and main dominant species were Parus varius, Parus major, Emberiza elegans, Garrolus glandarius, Sitta europaea, Hypsipetes amaurotis, Parus palustris in order. Cheoneun-sa trail route showed relatively decreasing trend of wild birds during spring and fall season because of the highest trail use of visitors. Maximum frequency of species and individuals appeared at Hwaum-sa route in spring and at Piagol route in fall. respectively. Those regions well explained the advantageous inhabitation area of birds in both regions. The diversity index of birds in winter showed little difference of similarity index due to balanced use of trails. Seasonal low similarity index in those 3 main trail district indicate a dissimilarity of environmental factors. Trail use restriction as a provision of proper management and protection of wild birds have to be made at Hwaum-sa route where propagation of birds actively occurred in spring and at Piagol route where birds wintering were observed will contribute to enhance species diversity in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.632-640
• /
• 2017

In order to understand the seasonal and geographical characteristics of environmental factors and distribution of Escherichia coli by salinity gradient due to precipitation, we investigated abiotic and biotic factors during four seasons from February 2013 to November 2015. The study area was divided into three different zones based on salinity gradient and geo-oceanographic characteristics. During the study period, water temperature, salinity, Chlorophyll a, and secchi-depth varied in the range of $8.5-26.1^{\circ}C$, 13.5-34.4 psu, $0.4-74.0{\mu}g\;L^{-1}$, and 0.5-10.0 m, respectively. Salinity was low at Zone I, which was influenced by water flux from Tae-hwa River, especially in 2014. Salinity was gradually increased (one-way ANOVA; p < 0.05) toward Zone III located offshore of the bay. The highest colony form of E. coli was detected at Zone I. E. coli maintained a relatively low level at Zone III during all seasons. E. coli was correlated with transparency (r = -0.36; p < 0.05) and salinity (r = -0.53; p < 0.01), implying that those parameters might play important roles in the proliferation of E. coli. These results indicated that E. coli were strongly affected by frequent rain (< 50 mm) around inner stations in Ulsan Bay of Korea.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.2
• /
• pp.177-183
• /
• 2015

In this study, the thermal conductivity, physical and mechanical properties of lightweight aggregate concretes with hollow micro sphere(HMS) are experimentally examined as a basic research for the development of structural insulation concrete. As the results of this experiment, in the case of concrete mixed with HMS, the value of slump has been reduced, so it is found that the dosage of superplasticizer should be increased. As the replacement ratio of HMS increases, it has shown that the compressive strength is somewhat decreased due to the low interfacial adhesion strength of HMS. But the thermal conductivity is found to be greatly improved with the replacement ratio of HMS increases, the thermal conductivity of HMS shows the lower value of 68% at lightweight aggregate concrete and 32% of normal concrete. Also it is found that the compressive strength is decreased and thermal conductivity is increased as the water-cement ratio increases. The most outstanding for insulation performance is observed when using 20% of HMS and 50% of water-cement ratio.

• Korean Journal of Weed Science
• /
• v.15 no.3
• /
• pp.183-187
• /
• 1995

The germination characteristics of Diplachne fusca (L.) P. Beauv. seeds were investigated under different seed storage conditions to find out reliable system for maintaining the seeds with high and uniform germination rate and thus for possible use of the seeds in herbicide screening with a continuous seed supply. When the seeds were stored under wet-low temperature($4^{\circ}C$) condition, the germination rate was 88% after 4-week-storage. The germination rate slightly declined after the storage for longer than 3 months. Dry seeds stored at room temperature exhibited very low germination rate. The wet-low temperature treatment was effective for inducing the germination of the seeds which had been stored under dry-room temperature condition for 4 months. The germination rate was 70% after 2-week- storage under the wet-low temperature condition. The germination rate was much higher under an alternate temperature condition than under a continuous temperature condition. The optimum temperature was 35/$25^{\circ}C$(14/10hrs). The seeds had a capability to germinate under NaCl-treated condition even at a concentration of 1.0%, whereas the germination of Echinochloa crus-galli seeds was completely inhibited by 0.5% NaCl. This result indicates that D. fusca has an advantage over E. crus-galli to survive in reclaimed 1and from the sea.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.290-290
• /
• 2012

본 실험에서는 RF magnetron sputtering법과 evaporator법을 이용하여 다층박막 OMO구조를 $30{\times}30mm$ 유리기판 위에 제작하였다. Oxide층은 Sputter장비를 이용 IGZO막을 제작하였으며, Metal 층은 evaporator장비를 이용 Ag 막을 제작하였다. 변수로는 Oxide층의 시간에 따른 특성 변화를 연구하였다. 소결된 타겟으로는 In:Ga:ZnO를 각각 1:1:1 mol%의 조성비로 혼합하여 이용하였으며, Ag는 99.999%의 순도를 가진다. Oxide층의 RF sputter 공정 조건으로는 초기압력 $3.0{\times}10^{-6}$ Torr 이하로 하였으며, 증착 압력 $2.0{\times}10^{-2}$ Torr, Rf power 30 W, Ar gas 50 sccm으로 고정 시켰으며, 변수로는 5, 7, 9, 11분은 시간 차이를 두어 증착을 하였다. Metal층의 Evaporator 공정조건으로는 $5.0{\times}10^{-6}$ Torr이하, 전압은 0.3 V, Thickness moniter로 두께를 확인해가며 증착하였으며, $100{\AA}$으로 고정시켰다. 분석결과로는 XRD 측정 결과 35도 부근에서 Ag 피크가 관찰되었다. IGZO막 하나일때 90% 이상의 평균 투과율을 보였으며, 3층의 구조가 모두 증착됐을때의 투과도는 가시광영역에서 평균 80% 이상의 투과율을 보였으며, 500 nm부터 투과율이 떨어지기 시작해 800 nm부근에서는 평균 투과율이 30%까지 떨어져 Metal층인 Ag가 하나의 layer로 잘 증착이 된것을 보여주며, 플라즈몬효과를 보여줌을 알수있다. AFM측정 결과 평균 거칠기는 1.2 nm 정도의 거칠기를 확인했다. 홀 측정결과 전기적 특성은 발견되지 않았다.

• Electrical & Electronic Materials
• /
• v.9 no.7
• /
• pp.652-659
• /
• 1996

Sintering characteristics and electrical properties of xPb(Mg$_{1}$8/Te$_{1}$8/Mn$_{1}$4/Nb$_{1}$2/) $O_{3}$-(1-x) Pb (Zr$_{1}$2/ $Ti_{1}$2/) $O_{3}$ (x=0.075, 0.1, 0.125) ceramics are investigated. A sintering temperature of ceramics could be reduced to 950.deg. C by a reaction between PbO and B site compound material. The physical properties of 0.1Pb(Mg, Te, Mn, Nb) $O_{3}$ - 0.9Pb(Zr, Ti) $O_{3}$ bulk ceramic with 3wt% glass frit(0.857PbO-0.143W $O_{3}$) were following : den = 7.95 g/cm$^{3}$, T$_{c}$=340.deg. C, .epsilon.$_{33}$= 754, k$_{31}$=0.3 and Q.=1780. The 3-layer piezoelectric transformer by using a tape casting method showed a good monolithic structure, and its voltage setup ratio was 2.5 times higher than that of a single device by using bulk ceramics.s.s.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.4
• /
• pp.271-279
• /
• 1984

Effects of temperature and additives on the stability of actomyosin extracted from skeletal muscle of Israeli carp, Cyprinus carpio nudus, were studied by analyzing free SH-group, ATP-sensitivity and Ca-ATPase activity. The used additives were sucrose, sorbitol, Na-glutamate and L-cysteine. Furthermore, the denaturation constant($K_D$), protective effect(${\Delta}E/M$) and the other thermo-dynamic parameters on protein denaturation are systematically discussed. The actomyosin showed $4.12{\sim}4.68 mg/ml$ in protein concentration, $2.63{\sim}2.93\%$ in ribonucleic acid to the protein, $1:2.20{\sim}2.63$ in the binding ratio of myosin and actin, $4.33{\sim}5.26\%$ in fat content, 109.78 in ATP-sonsitivity, $0.159{\sim}0.201\;{\mu}M-Pi/min/mg-protein$ in Ca-ATPase activity and $3.3{\sim}3.4M/10^5$g-protein in free SH-group content. The first-order rate plots were obtained on the decrease of Ca-ATPase activity and ATP-sensitivity with an increase in temperature, while the free SH-group was increased to $60^{\circ}C$ and decreased rapidly above the temperature. The half-life of Ca-ATPase activity on the actomyosin Ca-ATPase was 280 min at $12^{\circ}C$, 125 min at $20^{\circ}C$, 55 min at $30^{\circ}C$ and 13 min at $40^{\circ}C$, and activation energy, activation enthalpy, activation entropy and free energy of the proteins at $20^{\circ}C$ wene 5,395 cal/mole, 4,814 cal/mole, -40.42 e.u. and 17,626 cal/mole, respectively. The protective effect of the additives on the actomyosin Ca-ATPase showed that the most effective material is $3\%$ sorbitol and followed in the order of $8\%$ Na-glutamate, $1\%$ sucrose and $1\%$ L-cysteine. The actomyosin was more stable at $-30^{\circ}C$ than at $0^{\circ}C$ and $-20^{\circ}C$. and when the additives were used in the low temperature storage, $8\%$ Na-glutamate was the most effective. $3\%$ sorbitol, $1\%$ sucrose and $1\%$ L-cysteine was to become lower in the order.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.846-849
• /
• 2013

Thin film of $TiO_2$ was obtained by the sol-gel dip method on the brosilicate glass substrate. It was found that the film was about $1.5{\mu}m$ thick as obtained by 4 successive coatings and annealed at varied temperatures ranged from $300^{\circ}C$ to $1100^{\circ}C$ for 2 hrs. The substrate used was having the surface area of $100mm^2$. Increasing the annealing temperature caused to change in mineralogical phase of titanium oxide i.e., amorphous, crystalline antase to rutile phases. The particle size of the titanium oxide film were ranged from $0.1{\sim}0.54{\mu}m$ estimated by the SEM analysis. The material showed an absorbance maximum at the wavelength 390nm obtained by UV-visible spectrophotometer. These results therefore, indicated that the $TiO_2$ film obtained relatively at low annealing temperature consisted predominantly with anatase phase; possessed higher photocatalytic behavior i.e., 2.4 times higher than that of only UV lamp irradiation.

• Food Science and Preservation
• /
• v.21 no.4
• /
• pp.506-511
• /
• 2014

In Gyeongsangbuk-do seongju area, hundreds of tons of spoiled oriental melon are harvested annually. Therefore, ways to prevent such spoilage are needed. This study was conducted to investigate the quality characteristics of spoiled oriental melon juice after enzyme treatment for the production of oriental melon concentrate. The treatment of the oriental melon juice with three kinds of enzymes with variable concentrations showed the following results. PECE(1), which was compounded pectinase and cellulase at 0.01% (v/v), gave the melon a 0.16 brown color and 0.01 turbidity, and the highest L value of 97.00. The detected free sugar contents were fructose, glucose and sucrose, with the amount of sucrose the highest at roughly 4,000 mg%. The mixture of different enzyme treatments resulted in a 0.15 brown color and 0.01 turbidity at 60 minutes, and the L value was high at 97.25. The enzyme treatment temperatures of $50^{\circ}C$ and $60^{\circ}C$ yielded a low-level brown color and low turbidity, but the L values were high at $60^{\circ}C$ and $70^{\circ}C$. These results showed that 0.01% (v/v) mixing enzyme, i.e., pectinase and cellulose compounded at $60^{\circ}C$ for 60 min, must be used for the production of oriental melon concentrate.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.37-40
• /
• 1984

A simple and low cost autogenous-type extruder with a capacity of about 400kg/hr for rice bran-oil stabilization was developed. Specific energy consumption of the extruder was 0.060-0.070 KWH/kg of rice bran during extrusion. Rice bran was easily extruded to form flakes or pellets with an increase of bulk density. And also the desired extrusion temperature of $95^{\circ}C{\;}to{\;}150^{\circ}C$ could be easily obtained without any water addition when the rice bran was properly parametered with feed rate. The moisture content of bran was reduced and peroxidase was significantly inactivated after extrusion. The rice bran stabilized by the extrusion process was excellent in storage stability without considerable increase in free fatty acids.