• Journal of Korean Neurosurgical Society
• /
• v.46 no.1
• /
• pp.16-22
• /
• 2009

Objective : This study was designed to investigate automated pressure-controlled discography (APCD) findings, to calculate the elastance of intervertebral discs, and to assess the relationship between the calculated elastance and disc degeneration. Methods : APCD was performed in 19 patients. There were a total of 49 intervertebral discs treated. Following intradiscal puncture, a dye was constantly injected and the intradiscal pressure was continuously measured. The elastance of the intervertebral disc was defined as unit change in intradiscal pressure per fractional change in injected dye volume. Disc degeneration was graded using a modified Dallas discogram scale. Results : The mean elastance was 43.0${\pm}$9.6 psi/mL in Grade 0, 39.5${\pm}$8.3 psi/mL in Grade 1, 30.5${\pm}$22.3 psi/mL in Grade 2, 30.5${\pm}$22.3 psi/mL in Grade 3, 13.2${\pm}$8.3 psi/mL in Grade 4 and 6.9${\pm}$3.8 psi/mL in Grade 5. The elastance showed significant negative correlation with the degree of degeneration ($R^2$=0.529, P=0.000). Conclusion: APCD liberates the examiner from the data acquisition process during discography. This will likely improve the quality of data and the reliability of discography. Elastance could be used as an indicator of disc degeneration.

• Carbon letters
• /
• v.12 no.3
• /
• pp.143-151
• /
• 2011

Bagasse fly ash (BFA) is one of the important wastes generated in the sugar industry; it has been studied as a prospective low-cost adsorbent in the removal of congo red (CR) from aqueous solutions. Chemical treatment with $H_2O_2$ was applied in order to modify the adsorbability of the raw BFA. Batch studies were performed to evaluate the influence of various experimental parameters such as dye solution pH, contact time, adsorbent dose, and temperature. Both the adsorbents were characterized by Fourier-transform infrared spectrometer, energy-dispersive X-ray spectrophotometer and nitrogen adsorption at 77 K. Equilibrium isotherms for the adsorption of CR were analyzed by Langmuir, Freundlich and Temkin models using non-linear regression technique. Intraparticle diffusion seems to control the CR removal process. The obtained experimental data can be well described by Langmuir and also followed second order kinetic models. The calculated thermodynamic parameters indicate the feasibility of the adsorption process for the studied adsorbents. The results indicate that BFA can be efficiently used for the treatment of waste water containing dyes.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.4
• /
• pp.306-312
• /
• 2006

Two culture modes, continuous and semi-continuous, of the decolorization fungus, Geotrichum candidum Dec 1, were compared to obtain a high treatment efficiency of molasses decolorization and a large productivity of peroxidase (DyP) to simultaneously decolorize dyes and molasses. The continuous culture of G. candidum Dec 1 using a 5-I jar-fermentor showed high DyP activity at a low dilution ratio of $0.005h^{-1}$, and decolorization ratio of molasses of 80% was obtained concomitantly. Therefore, a semi-continuous culture was performed by repeated refill and draw. In this mode, approximately 1.5 liters of the culture broth was replaced per cycle when the decolorization ratio of molasses was near 80%. The molasses medium (1.0 liter per day) was treated and the peroxidase productiveity in the drawn culture broth was 26.6U/day, whereas the peroxidase productiveity was 17.9U/day in the continuous culture with a dilution rate of $0.005h^{-1}$. The semi-continuous treatment system was an efficient decolorization method for the strain, G. candidum Dec 1.

• Journal of Photoscience
• /
• v.10 no.3
• /
• pp.219-223
• /
• 2003

Phloxine B (2,4,5,7-tetrabromo-4,5,6,7-tetrachlorofluorescein disodium salt), also referred as D&C red dye no. 28, is phototoxic to many insects such as Tephritidae fruit flies. Sunlight photolysis of phloxine B in aqueous solutions was a first order kinetic reaction at low concentrations. But it turned to be more complex reactions with the increase of phloxine B concentration. The half-lives of phloxine B (6-120 ${\mu}$M) were 18-41 and 52-289 hours in oxygenated and deaerated distilled water, respectively. The photolysis rate constants increased as the phloxine B concentrations increased. The singlet oxygen formation positively correlated with the concentrations of phloxine B and humic acid in oxygenated distilled water. The formation of singlet oxygen did not stop even after the complete degradation of phloxine B, which suggested an involvement of photoproduct-mediated reactions. The results showed that singlet oxygen mediated photooxidation was a dominant reaction for phloxine B dissipation in an aqueous solution, and the self-sensitized and photoproduct-mediated reactions were also involved at the higher concentrations. Iodide and bromide ions significantly decreased phloxine B photolysis rate constants, which were in relation to the decrease of singlet oxygen formation.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.11.2-11.2
• /
• 2011

A key technological issue related to the implementation of dye-sensitized solar cells (DSSCs) is the replacement of Pt at the counter electrodes with an inexpensive and electro-chemically stable alternative. Carbon based nanomaterials could be promising candidates, but in practice they exhibit inadequate device performance. Here, we report very thin graphene oxide (GO)/metal hybrid films as transparent counter electrodes for high-efficiency DSSCs. Transparent GO/Pt and GO/Au hybrid films showed cell efficiencies of 9.2 and 9.0%, respectively (improvements of 9.5 and 7.1% over conventional Pt counter electrodes). More interestingly, highly stable DSSCs with GO hybrid films from relatively inexpensive metals such as Cu and Ni have been demonstrated with efficiency values comparable to Pt counter electrodes. The results reported in this study should enable low-cost fabrication of DSSCs because it allows the use of relatively inexpensive metals such as Au, Cu, Ni, and Ag that could not be previously employed in DSSCs with iodide/tri-iodide electrolyte due to corrosion.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1485_1486
• /
• 2009

Transparent conductive metal oxide films of $In_{2-x}Sn_xO_3$ (ITiO) and $In_{2-x}Sn_xO_3$ (ITO) were deposited by RF magnetron sputtering at relatively low substrate temperature (~$300^{\circ}C$) and at high rate (~10nm/min). Electrical and optical properties of the films were investigated as well as film structure and morphology, as it is compared with the commercial F:$SnO_2$ (FTO) glass. Near infrared ray transmittance of ITiO is the highest for wavelengths over 1000nm, which can increase dye sensitized compared to ITiO and FTO. Dye-sensitized solar cells (DSCs) were fabricated using the ITiO, ITO and FTO. Photoconversion efficiency ($\eta$) of DSC using ITiO is 5.5%, whereas 5.0% is obtained from DSC with ITO, both at 100mW/$cm^2$ light intensity.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.335-338
• /
• 2007

Cost effectiveness is an important parameter for producing DSSCs as compared to the widely used conventional silicon based solar cells. A fluorine-doped tin oxide (FTO) substrate coated with a catalytic amount of platinum is used as counter electrode in dye-sensitized solar cell. Carbonaceous materials are quite attractive to replace platinum due to their high electronic conductivity, corrosion resistance towards $I_{2}$, good catalytic effect and low cost. In this paper, the unit DSSCs with Pt and CNT as a counter electrode were connected in series-parallel externally, then the current-voltage curves were investigated to find out the connection characteristics of the DSSC with CNT counter electrode. The connection characteristics of the DSSC with CNT counter electrode is superior to that of the DSSC with Pt counter electrode. And a parallel connection of the DSSC with CNT counter electrode has higher efficiency than a series connection of that.

• Journal of the Korean Chemical Society
• /
• v.39 no.3
• /
• pp.143-149
• /
• 1995

At low concentration a simplified model of organic dye-surfactant system has been used to evaluate. By applying the resultant three parameter equation to the experimental data, values for the equilibrium constants for the ion-pair formation $(K_O)$, surfactant molecule addition to aggregates $(K_S)$ and dye aggregation reactions $(K_D)$ could be calculated and changes of free energy have obtained from its values. $K_O$ and K_S$ values were larger than those expected electrostatic interaction indicatihng a hydrophobic contribution and the $K_D$ values were about 10~20 times higher than those found for association in pure aqueous solutions which can be ascribed to the screening effect of the electrostatic repulsion.

• Clean Technology
• /
• v.12 no.3
• /
• pp.145-150
• /
• 2006

Electrolysis of aqueous solution produces hydroxide ions and proton ions for the hydrolysis of reactive organic compounds, and oxidizing agent such as hypochlorite ions for the oxidative decomposition of organic chemicals. Electrolytic decomposition of dying chemicals was tested with our custom made system, and analyzed by HPLC and UV-VIS spectrophotometer. The electrolytic system could decompose dying chemicals with very high reactivity and low cost. Disposal of byproduct and refill of reactant during electrolysis was not necessary. Decomposition time of dying chemicals is compared under similar conditions, and application to water purification is discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.287-297
• /
• 1994

The purpose of this study is to investigate the Improvement of fiber surface, tenacity & elogation, fabric counts, thickness, handle, moisture regain, static voltage, handle, dyeability when polyester fabrics are treated with NaOH solution adding quartemary ammonium salt (Benzyl dimetyl dodecyl ammonium chloride . BDMDAC) The results are as follows. I. In regard to the method of processing VET, when the PET fabrics are alkaline-hydrolyzed adding BDMDAC, the weight loss of PET fabrics increased remarkably to the increse of BDMDAC concentration than when they are treated only in NaOH solution. When PET fabrics are alkaline-hydrolyzed the amount of BDMDAC as the catalyst is proper lg/1 II. The change in physical & chemical properties of alkaline-hydrolyzed PET fabrirs. 1. As the amount of the weight loss on PET fabrics increased, the void space of the PET yale increased but tenacity & elongation and thickness decreased. 2. The fabric counts of PET increased due to shrinkage by alkaline-hydrolydzing. 3. As the amount of of the weight loss on PET fabrics increased. NUMERI, FUKURAMI, increaseed and KOSHI decreased and Total hand value(T.H.V) in all cases increaseed. When the weight Ioss is 30.9% T.H.V. is best. 4. Moisture regain of PET fabrics a little increased by alkaline-hydrolyzing treatment. As the weight loss increased, static voltage is decreased. 5. The last dye absorption is different according to the degree of the Affinity. In regard to the difference of dye color, the dyestuff of low molecular weight dyed for deep color.