• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.7-10
• /
• 2004

This paper describes techniques to implement low-cost adapt ive Pipelined LMS filter for ASIC implement ions of high communication receivers. Power consumpiton can be reduced using a careful selection of architectural, algorithmic, and VLSI circuit techlifue A Pipelined architecture for the strength-reduced algorithm is then developed via the relaxed look-ahead transformation. This technique, which is an approximation of the conventional look-ahead compution, maintains the functionality of the algorithm rather than the input-output behavior Convergence maiysis of the Proposed architecture has been presented and support via simulation results. The resulting pipelined adaptive filter achives a higher though put requires lower power as compared to the filter using the serial algorithm.

• Convergence Security Journal
• /
• v.6 no.1
• /
• pp.83-90
• /
• 2006

Recently, the security for RFID/USN environment is divided into network security and RFID security. The authentication protocol design for RFID security is studied to protect user privacy in RFID system. However, the study of efficient authentication protocol for RFID system is not satisfy a security for low-cost RFID tag and user privacy. Therefore, this paper proposes a secure matrix-based RFID authentication protocol that decrease communication overhead and computation. In result, the Matrix-based RFID authentication protocol is an effective authentication protocol compare with HB and $HB^+$ in traffic analysis attack and trace location attack.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.486-488
• /
• 2006

RFID 기술의 신속한 확산을 위해서는 태그의 저가격화, 초소형화, 저전력화, 보안 및 프라이버시 문제, 태그식별자의 표준화, 다중태그 식별문제등이 우선적으로 해결되어야 한다. 특히, 식별영역 내에 다수의 태그가 존재할 경우에 다중태그 식별(multi-tag identification)을 위한 충돌방지(anticollision) 알고리즘은 RFID 시스템 구축에 있어서 반드시 해결해야 하는 핵심기술이다. 기존의 충돌방지 알고리즘들은 구현의 복잡성과 낮은 성능이 문제로 제기되고 있으며 지금까지 충돌방지와 관련하여 진행된 대부분의 연구들은 각각 고유한 형태의 태그식별자 체계를 기반으로 진행되어 왔으며 태그식별성능에 대한 비교연구도 부족한 상태이다. 본 논문에서는 저비용(low-cost) RFID 시스템에서 현재 표준화가 진행되고 있는 96비트 EPC (Electronic Product Code) 코드를 기반으로 병원 환경에서 태그에 우선순위를 부여하여 충돌이 발생하면 우선순위가 가장 높은 것부터 읽어들일 수 있는 그룹 트리 알고리즘을 제안하였다.

• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2011

Basalt originates from volcanic magma and flood volcanoes, a very hot fluid or semifluid material under the earth's crust, solidified in the open air. Basalt is a common term used for a variety of volcanic rocks, which are gray, dark in colour, formed from the molten lava after solidification. Recently, attention has been devoted to continuous basalt fibers (CBF) whose primary advantage consists in their low cost, good resistance to acids and solvents, and good thermal stability. In order to investigate reinforcement effect, this paper did FEM analysis with shell element. The result were as follows; BCF deck plate did elastic behavior to 450 kN, reinforcement effect of basalt fiber (BF) was less. But BCF's perpendicular deflection occurred little about 23 mm comparing with RC deck plate in load 627 kN. Stiffness was very improved by basalt fiber reinforcement.

• 한국정보컨버전스학회:학술대회논문집
• /
• 2008.06a
• /
• pp.75-86
• /
• 2008

This paper presents the design, implementation, and evaluation of the RFID Guardian, the first-ever unified platform for RFID security and privacy administration. The RFID Guardian resembles an "RFID firewall", enabling individuals to monitor and control access to their RFID tags by combining a standard-issue RFID reader with unique RFID tag emulation capabilities. Our system provides a platform for coordinated usage of RFID security mechanisms, offering fine-grained control over RFID-based auditing, key management, access control, and authentication capabilities. We have prototyped the RFID Guardian using off-the-shelf components, and our experience has shown that active mobile devices are a valuable tool for managing the security of RFID tags in a variety of applications, including protecting low-cost tags that are unable to regulate their own usage.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.307-316
• /
• 2009

RFID technique which is recognizable without the physical contact between the reader and the tag is the core to archive ubiquitous environment, and has been attracting a lot of interest from both industry and academic institutes. Especially, RFID based logistic service management can get the low priced cost and the advancement of the appointed date of delivery. In this paper, we first analyze security requirements of international logistics process, and then propose a RBAC based security model and represent access control constraints using UML.

• The KIPS Transactions:PartD
• /
• v.17D no.2
• /
• pp.157-166
• /
• 2010

More recently, RFID (Radio Frequency Identification) systems have begun to find greater use in various industrial fields. The use of RFID system in these application domains has been promoted by efforts to develop the RFID tags which are low in cost, small in size, and high in performance. The RFID applications enable the real-time capture and update of RFID tag information, while simultaneously allowing business process change through real-time alerting and alarms. These be developed to monitor person or objects with RFID tags in a place and to provide visibility and traceability of the seamless flows of RFID tags. In this time, the RFID readers should be placed in diverse locations, the RFID flows between these readers can be tested based on various scenarios. However, due to the high cost of RFID readers, it may be difficult to prepare the similar environment equipped with RFID read/write devices. In this paper, we propose a simulator to allow RFID application testing without installing physical devices. It can model the RFID deployment environment, place various RFID readers and sensors on this model, and move the RFID tags through the business processes. This simulator can improve the software development productivity by accurately testing RFID middleware and applications. In addition, when data security cannot be ensured by any fault, it can decide where the problem is occurred between RFID hardware and middleware.

• The Journal of Society for e-Business Studies
• /
• v.13 no.1
• /
• pp.21-32
• /
• 2008

RFID systems provide technologies of automatic object identification through wireless communications in invisible ranges and adaptability against various circumstances. These advantages make RFID systems to be applied in various fields of industries and individual life. However, it is difficult to use tags with distinction as tags are increasingly used in life because a tag usually stores only one object identifier in common RFID applications. In addition, RFID systems often make serious violation of privacy caused by various attacks because of their weakness of radio frequency communication. Therefore, information sharing methods among applications are necessary for expansive development of RFID systems. In this paper, we propose efficient RFID scheme. At first, we design a new RFID tag structure which supports many object identifiers of different applications in a tag and allows those applications to access them simultaneously. Secondly, we propose an authentication protocol to support the proposed tag structure. The proposed protocol is designed by considering of robustness against various attacks in low cost RFID systems. Especially, the proposed protocol is focused on efficiency of authentication procedure by considering security levels of applications. In the proposed protocol, each application goes through one of different authentication procedures according to their security levels. Finally, we prove efficiency of th proposed scheme compared with the other schemes through experiments and evaluation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1393-1401
• /
• 2013

What is RFID Microchip tag attached to an object, the reader recognizes technology collectively, through communication with the server to authenticate the object. A variety of RFID tags, 13.56Mhz bandwidth RFID card, ISO/IEC 14443 standards based on NXP's Mifare tag occupies 72.5% of the world market. Of the Mifare tags, low cost tag Mifare Classic tag provided in accordance with the limited hardware-based security operations, protocol leaked by a variety of attacks and key recovery vulnerability exists. Therefore, in this paper, Cryptography Scheme and Secure Protocol for Safety Secure Scheme Construction in 13.56Mhz RFID have been designed. The proposed security scheme that KS generated by various fixed values and non-fixed value, S-Box operated, values crossed between LFSR and S-Box is fully satisfied spoofing, replay attacks, such as vulnerability of existing security and general RFID secure requirement. Also, It is designed by considering the limited hardware computational capabilities and existing security schemes, so it could be suit to Mifare Classic now.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.5
• /
• pp.67-77
• /
• 2006

Radio Frequency IDentification (RFID) will soon become an important technology in various industries. Therefore, security mechanisms for Rm systems are emerging crucial problems in RFID systems. In order to guarantee privacy and security, it is desirable to encrypt the transferred data with a strong crypto algorithm. In this paper, we present the ultra-light weight Advanced Encryption Standard (AES) processor which is suitable for RFID tags. The AES processor requires only 3,992 logic gates and is capable of both 128-bit encryption and decryption. The processor takes 446 clock cycles for encryption of a 128-bit data and 607 clock cycles for decryption. Therefore, it shows 55% improved result in encryption and 40% in decryption from previous cases.