• 신재생에너지
• /
• 제5권4호
• /
• pp.11-18
• /
• 2009

Wind energy resources are recently considered as an important power generation alternative in the future. The fact that the investment of wind turbine installation continues to increase has motivated a need to develop more widely applicable methodologies for evaluating the actual benefits of adding wind turbines to conventional generating systems. This study is aiming to estimate the future wind resources with various estimation methods. The wind power is calculated at the hub height 75m of 800KW and 1,500KW wind turbines in Wolryong site, Jeju island, South Korea. Three equations - logarithmic, profile, and power law methods are applied for the accurate prediction of wind profile. In addition, yearly wind power can be calculated by using Weibull & Rayleigh distribution. It is found that predicted wind speed is highly affected by friction velocity, atmospheric stability, and averaged roughness length. It is concluded that Rayleigh distribution provides greater power generation than the Weibull distribution, especially for low wind-speed condition.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.382-394
• /
• 1988

Dynamic characteristics of thermally-forced stratification process in a square enclosure with a linear temperature profile at the side walls have been investigated through flow visualization experiment and numerical analysis. The experiment was performed on air with the Rayleigh numbers of order $10^5$. A particle tracer method is used for the flow visualization and to obtain a sudden linear temperature profile at the side walls copper blocks which already have a linear temperature profile are come into contact with the thin copper plates of the test section. Immediately a meridional circulation is developed and heat transfer takes place from the wall to the interior region by circulation of fluid and finally a thermal stratification is achieved. In the numerical study, QUICK scheme for convective terms, SIMPLE algorithm for pressure correction, and the implicit method for the time marching are adopted for the integration of conservation equations. Comparison of flow visualization and numerical results shows that the developing flow patterns are very similar in dynamic nature even though there is a time lag due to the inevitable time delay in setting up a linear temperature profile. For high Rayleigh numbers, the oscillatory motion is likely to take place and stratified region is extended. However, initial temperature adjustment process is much slower than that for low Rayleigh numbers.

• International Journal of Advanced Culture Technology
• /
• 제9권4호
• /
• pp.226-236
• /
• 2021

The purpose of this study is to analyze the type of latent profile for general high school students' subject selection criteria and to identify the characteristics of the latent class. The survey data of 1072 general high school students (male; 648, female; 424) in G city, Jeollabuk-do and the scale composed of 8 sub-factors: 'SAT orientation', 'academic achievement', 'ability orientation', 'pursuit of interest', 'teacher orientation', 'career development', 'others' recommendation', and 'subject availability' were used for latent profile analysis and cross-analysis between potential layers. As a result of the analysis, high school students' perceptions of subject selection were classified into four latent profiles. The four groups were named 'High Perception Type', 'Low Perception Type', 'Self-Directed Type', and 'Stability-Oriented Type' according to their types. It was found that there was a difference between the latent classes in the importance and performance level of the subject selection criteria. These results can help identify the subject selection tendencies of latent groups in the operation of the 2015 revised curriculum and the 2025 high school credit system that emphasizes the student-centered course selection curriculum and they can also provide customized course selection guidance considering individual differences.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권2호
• /
• pp.252-259
• /
• 2015

The present study was conducted to investigate the efficacy of sweet potato powder (SPP) and water as a fat replacer in low-fat pork patties. Low-fat pork patties were developed by replacing the added fat with combinations of SPP and chilled water. Three different levels of SPP/chilled water viz. 0.5/9.5% (T-1), 1.0/9.0% (T-2), and 1.5/8.5% (T-3) were compared with a control containing 10% animal fat. The quality of low-fat pork patties was evaluated for physico-chemical (pH, emulsion stability, cooking yield, $a_w$), proximate, instrumental colour and textural profile, and sensory attributes. The cooking yield and emulsion stability improved (p<0.05) in all treatments over the control and were highest in T-2. Instrumental texture profile attributes and hardness decreased, whereas cohesiveness increased compared with control, irrespective of SPP level. Dimensional parameters (% gain in height and % decrease in diameter) were better maintained during cooking in the low-fat product than control. The sensory quality attributes juiciness, texture and overall acceptability of T-2 and T-3 were (p<0.05) higher than control. Results concluded that low-fat pork patties with acceptable sensory attributes, improved cooking yield and textural attributes can be successfully developed with the incorporation of a combination of 1.0% SPP and 9.0% chilled water.

• 한국식품영양학회지
• /
• 제31권1호
• /
• pp.195-201
• /
• 2018

This study was intended to investigate the characteristics of muffins prepared with allulose which is low-calorie and physiologically functional rare sugar. Volume and specific volume of muffins increased significantly with allulose addition, but not with its contents. Muffin heights also increased as allulose was added more. Baking loss rate and moisture contents were not significantly different among samples. Allulose seemed to have nearly same water holding capacity with sucrose. Lightness of muffin crust and crumb both decreased, but redness and yellowness increased according to allulose, the reducing sugar addition by Maillard reaction. In the texture profile analysis, Hardness of AL100 was higher significantly (p<0.05) and springiness, cohesiveness and fracturability increased according to the allulose contents. In the sensory evaluation, AL0 was the sweetest and AL0 and AL25 got higher overall acceptance score. Physical characteristics were not different (p<0.05) among AL0, Al25 and AL50. As a result, 25% sucrose substitution with allulose can provide low-calorie, anti-hyperglycemic and tasty muffin.

• Nuclear Engineering and Technology
• /
• 제41권7호
• /
• pp.969-978
• /
• 2009

The ASSERT-PV subchannel code developed by AECL has been applied as a design-assist tool to the advanced $CANDU^{(R)1}$ reactor fuel bundle. Based primarily on the $CANFLEX^{(R)2}$ fuel bundle, several geometry changes (such as element sizes and pitch-circle diameters of various element rings) were examined to optimize the dryout power and pressure-drop performances of the new fuel bundle. An experiment was performed to obtain dryout power measurements for verification of the ASSERT-PV code predictions. It was carried out using an electrically heated, Refrigerant-134a cooled, fuel bundle string simulator. The axial power profile of the simulator was uniform, while the radial power profile of the element rings was varied simulating profiles in bundles with various fuel compositions and burn-ups. Dryout power measurements are predicted closely using the ASSERT-PV code, particularly at low flows and low pressures, but are overpredicted at high flows and high pressures. The majority of data shows that dryout powers are underpredicted at low inlet-fluid temperatures but overpredicted at high inlet-fluid temperatures.

• 한국대기환경학회지
• /
• 제31권5호
• /
• pp.449-460
• /
• 2015

Carbonaceous aerosol is generally classified into OC (organic carbon) and EC (elemental carbon) by thermal optical analysis. Both NIOSH (National institute of occupational safety and health) with high temperature (HighT) and IMPROVE-A (Interagency monitoring of protected visual environments) with low temperature (LowT) protocols are widely used. In this study, both protocols were applied for ambient $PM_{2.5}$ samples (Daejeon, Korea) in order to underpin differences in OC and EC measurements. An excellent agreement between NIOSH and IMPROVE-A protocol was observed for TC (total carbon). However, significant differences between OC and EC appeared and the differences were larger for EC than OC. The main differences between two protocols are temperature profile and charring correction method. For the same charring correction method, HighT_OC was 10% higher than LowT_ OC, while HighT_EC was 15% and 33% lower than LowT_EC for TOT (thermal-optical transmittance) and TOR (thermal-optical reflectance), respectively. This difference may be caused by the temperature of OC4 in He step and possibly difference in POC (pryorilized OC) formation. For the same temperature profile, OC by TOT was about 26% higher than that by TOR. In contrast, EC by TOT was about 50% lower than that by TOR. POC was also dependent on both temperature profile and the charring correction method, showing much distinctive differences for the charring correction method (i.e., POC by TOT to POC by TOR ratio is about 2). This difference might be caused by different characteristics between transmittance and reflectance for monitoring POC formation within filters. Results from this study showed that OC and EC depends on applied analysis protocol as shown other studies. Because of the nature of the thermal optical analysis, it may not be possible to have an absolute standard analysis protocol that is applicable for any ambient $PM_{2.5}$. Nevertheless, in order to provide consistent measurement results for scientists and policy makers, future studies should focus on developing a harmonized standard analysis protocol that is suitable for a specific air domain and minimizes variations in OC and EC measurement results. In addition, future elaborate studies are required to find and understand the causes of the differences.

• 한국결정성장학회지
• /
• 제28권5호
• /
• pp.179-184
• /
• 2018

고효율 태양전지용 단결정 실리콘 웨이퍼는 쵸크랄스키 성장법으로 석영도가니 속의 실리콘 액체에서 단결정 잉곳을 성장시켜 제조된다. 석영도가니 성분 중의 하나는 산소는 실리콘 잉곳으로 유입되고, 태양전지의 전력변환 효율 저하 문제를 발생시킨다. 이러한 산소 유입을 줄이는 다양한 방법 중 하나는 히터의 모양과 구조를 변경하는 방법이 있다. 그러나 히터 구조 변경 시 단결정 실리콘 잉곳 바디 성장에 필요한 온도 분포경향에 큰 변화를 일으킨다. 따라서 본 연구에서는 쵸크랄스키 실리콘 성장에서 다양한 히터의 구조와, 히터와 석영도가니의 상대적 위치가 단결정 실리콘 잉곳 Body 성장 시의 ATC 온도와 Power 분포경향에 미치는 영향에 대하여 연구하였다. 삼중점과 히터 중심과의 위치가 가장 먼 SSH-Low가 가장 높은 ATC 온도 분포경향을 보여주었다. 또한 길이가 짧은 Short Side Heater(SSH-Up, SSH-Low)보다는 실리콘 액체를 담고 있는 석영도가니 측면의 많은 영역을 커버할 수 있는 일반 Side Heater(SH)가 가장 Power 소모 측면에서 유리하였다. 특히 본 연구 결과를 통해 고효율 태양전지용 단결정 실리콘 잉곳 성장 시 필요한 효율적인 ATC 온도를 예측할 수 있음을 확인하였다.

• Journal of Nutrition and Health
• /
• 제40권2호
• /
• pp.162-171
• /
• 2007

Obesity is an independent risk factor fur coronary artery disease in the postmenopausal women, which may be mediated by alteration of blood lipid metabolism. We are aimed to evaluate the effects of low energy diet, restriction of high fat foods and exercise education on weight, fat mass and blood lipid profile. Fifteen postmenopausal obese women were studied. Subjects received detailed advice about how to achieve a reduction of weight by a low-energy diet (1,200kcal), restriction of high fat food and increased exercise in every 4 wks during 8 wk. To evaluate the effectiveness for education programs, dietary fat habit and daily nutrient intakes, exercise were tested before and after intervention. Anthropometry, computerized tomography, and blood lipid profile were assessed before and after intervention. According to the nutrition education, energy intake (from 1776.1 ${\pm}$ 28.2 kcal to 1268.7 ${\pm}$ 115.2 kcal, p < 0.001) and percent of energy from fat (21.9%, p < 0.01) were significantly decreased. However, the index of nutritional quality was over 1.0. On the contrary, exercise (from 341.3 ${\pm}$ 222.1 kcal to 569.4 ${\pm}$ 309.8 kcal, p < 0.05) was increased and dietary fat habit scores (from 30.8 ${\pm}$ 5.2 to 36.1 ${\pm}$ 3.0, p < 0.01) were improved. Also, body weight (4.2%, p < 0.001), BMI (4.5%, p < 0.001), body fat mass (3.4%, p < 0.05) and waist to hip ratio (1.1%, p < 0.05) were decreased. Among abdominal fat, visceral fat (26.1%, p < 0.05) and subcutaneous fat (14.8%, p < 0.01) were decreased. But there was no difference in visceral fat to subcutaneous fat ratio. We observed HDL-cholesterol increase (11.7%, p < 0.05), triglyceride reduction(14.8%, p < 0.05) and atherogenic index improvement (from 2.7 ${\pm}$ 0.7 to 2.3 ${\pm}$ 0.7, p < 0.05) However, there was no change in LDL-cholesterol and total cholesterol. Theses results showed that low energy diet, restriction of high fat foods and exercise education could result in reduction of body weight, fat mass, visceral and subcutaneous fat, and in improvement of blood lipid profile in the postmenopausal obese women.

• 한국토양비료학회지
• /
• 제48권2호
• /
• pp.105-118
• /
• 2015

This study was carried out to investigate the effects of profile disturbance with different artificial accumulation history on physico-chemical properties of soil under plastic film house. The investigations included soil profile description using soil column cylinder auger F10cm x h110cm, in situ and laboratory measurements of soil properties at five sites each at the cucumber (Site Ic ~ Vc) and grape (Site Ig ~ Vg) plastic film houses with artificial soil accumulation. The sites except sites Ic, IVc, IVg and Vg, belong to ex-paddy area. The types of accumulates around root zone included sandy loam soil for 3 sites, loam soil for 1 site, saprolite for 2 sites, and multi-layer with different accumulates for 3 sites. Especially, Site IIg has mixed plow zone (Ap horizon) with original soil and saprolite, whereas disturbed soil layers of the other sites are composed of only external accumulates. The soil depth disturbed by artificial accumulation ranged from 20 cm, for Site IIg, to whole measured depth of 110 cm, for Site IVc, Vc, and Site IVg. Elapsed time from artificially accumulation to investigation time ranged from 3 months, Site IIc, to more than 20 years, Site Vg, paddy-soil covering over well-drained upland soil during land leveling in 1980s. Disturbed top layer in all sites except Site Vg had no structure, indicating low structural stability. In situ infiltration rate had no correlation with texture or organic matter content, but highest value with highest variability in Site IIIc, the shortest elapsed time since sandy loam soil accumulation. Relatively low infiltration rate was observed in sites accumulated by saprolite with coarse texture, presumably because its low structural stability in the way of weathering process could result in relatively high compaction in agro-machine work or irrigation. In all cucumber sites, there were water-transport limited zone with very low permeable or impermeability within 50 cm under soil surface, but Site IIg, IIIg, and Vg, with relatively weak disturbance or structured soil, were the reverse. We observed the big change in texture and re-increase of organic matter content, available phosphate, and exchangeable cations between disturbed layer and original soil layer. This study, therefore, suggest that the accumulation of coarse material such as saprolite for cultivating cash crop under plastic film house might not improve soil drainage and structural stability, inversely showing weaker disturbance of original soil profile with higher drainage.