• 한국염색가공학회지
• /
• 제5권2호
• /
• pp.134-138
• /
• 1993

Wool, silk and nylon 6 fabrics were treated with low-temperature plasma under atmospheric pressure of acetone/argon or helium/argon for 30 and 180 sec, and then dyed with leveling type acid dye, C.I. Acid Red 18 and milling type acid dye, C.I. Acid Blue 83. In spite of short time of the plasma treatment for thirty seconds, the color depth of wool fabrics was increased remarkably with both of the plasma gases, aceton/argon or helium/argon and with the kinds of dyes i.e., levelin type or milling type. But the atmosperic low-temperature plasmas did not increase the depth of silk and nylon 6 fabrics dyed with both of the acid dyes regardless of the teated time and plasma gases. It seems that low-temperature plasma by atmospheric-pressure discharge is effective for improvement of dyeing of wools as is the same way with the low-temperature plasma by glow discharge. The kinds of plasma gases and treated time did not influnce the depth of wool fabric pretreted with the atmosperic low-temperature plasmas.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권11호
• /
• pp.1570-1574
• /
• 2004

A flock of AA breed chickens were reared in peterstme brood-vait chamber and were provided with high energy pelleted feed. At 14 d of age, a total of 350 birds were randomly divided into 3 groups as follows: 100 birds were exposed to normal ambient temperature of 20$^{\circ}C$ for control group; 150 birds were exposed to lower ambient temperature of 11$^{\circ}C$ to induce ascites (treatment I); and another group of 100 birds were exposed to lower ambient temperature of 11$^{\circ}C$ and fed diet containing 1% L-arginine for ascitic prophylactic treatment (treatment II). Samples were collected from blood and abdominal fluid of chicken at 3, 4, 5, 6 and 7 wk of age subsequently, to analysis the contents of plasma endothelin (ET-1), angiotensin II (Ang II), cyclic adenosine monophosphate (cAMP), cyclic guanosine monophosphate (cGMP). The results indicated that the contents of cAMP, cGMP, and Ang II in reatment I and ascitic broilers were higher than the corresponding control group (p<0.01, p<0.05), ET-1 of preascitic broilers were control group (p<0.05), while there was an insignificant difference with later ascitic broilers. The contents of cAMP and cGMP in treatment II were higher than the treatment I and control groups (p<0.01, p<0.05), whereas, the contents of Ang II were gradually decreased compared to the control group (p<0.05), the contents of ET-1 were insignificantly different. On further analysis, the increased plasma Ang II at low ambient temperature condition in broilers made endothelium cell secretion of increased ET-1, cAMP, cGMP and decreased NO. Therefore, low temperature accelerated ascites syndrome in broilers. Supplemently L-arginine can decrease ET-1, and increase cAMP and cGMP. It is concluded that cAMP mediated in broilers pulmonary hypertension syndrome.

• 한국도로학회논문집
• /
• 제16권1호
• /
• pp.31-39
• /
• 2014

PURPOSES : Surface treatment material for pavement preventive maintenance should be inspected field applicability. This study(Part II) aimed to checkup coating characteristics and performance analysis using lab and field tests. The hydrophobic - low viscosity filling material for pavement preventive maintenance is presented in Part I, which is a series of companion study. METHODS : Relative comparison between general asphalt mixtures and surface treatment asphalt mixtures are analyzed and measured for the field application such as indirect tensile strength ratio(TSR), abrasion resistance, crack propagation resistance, temperature resistance, coating thickness, permeability resistance and skid resistance in terms of british pendulum number(BPN). RESULTS : It is found that TSR, crack propagation resistance and permeability resistance is increased as against uncoated asphalt specimen. Abrasion resistance and temperature resistance is secured from the initial coating thickness point of view, which is about 0.2~0.3mm. Skid resistance on the surface treatment pavement is satisfied with the BPN criteria of national highway because of exposed aggregate and crack sill induced pavement deterioration and damage cracks. CONCLUSIONS : The hydrophobic - low viscosity surface treatment material for pavement preventive maintenance is validated on field applicability evaluation based on quantitative analysis of coating thickness and performance analysis using lab and field tests.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.60-65
• /
• 2011

A low temperature plasma carburizing process was performed on AISI 316L austenitic stainless steel to achieve an enhancement of the surface hardness without degradation of its corrosion resistance. Attempts were made to investigate the influence of the processing temperatures on the surface hardened layer during low temperature plasma carburizing in order to obtain the optimum processing conditions. The expanded austenite (${\gamma}_c$) phase, which contains a high saturation of carbon (S phase), was formed on all of the treated surfaces. Precipitates of chromium carbides were detected in the hardened layer (C-enriched layer) only for the specimen treated at $550^{\circ}C$. The hardened layer thickness of ${\gamma}_c$ increased up to about $65{\mu}m$ with increasing treatment temperature. The surface hardness reached about 900 $HK_{0.05}$, which is about 4 times higher than that of the untreated sample (250 $HK_{0.05}$). A minor loss in corrosion resistance was observed for the specimens treated at temperatures of $300^{\circ}C{\sim}450^{\circ}C$ compared with untreated austenitic stainless steel. In particular, the precipitation of chromium carbides at $550^{\circ}C$ led to a significant decrease in the corrosion resistance. A diamond-like carbon (DLC) film coating was applied to improve the wear and friction properties of the S phase layer. The DLC film showed a low and stable friction coefficient value of about 0.1 compared with that of the carburized surface (about 0.45). The hardness and corrosion resistance of the S phase layer were further improved by the application of such a DLC film.

• 열처리공학회지
• /
• 제29권5호
• /
• pp.209-215
• /
• 2016

In this study, the effect of Nb contents and processing parameters on dynamic recrystallization behaviour of 0.15C-0.2Si-0.5Mn low-carbon steels was investigated. Three kinds of steel specimens with different Nb contents were fabricated and then high-temperature compressive deformation test was conducted by varying reheating temperature (RT), deformation temperature (DT), and strain rate (SR). The Nb2 and Nb4 specimens containing Nb had smaller prior austenite grain size than the Nb0 specimens, presumably due to pinning effect by the formation of carbides and carbonitrides precipitates at austenite grain boundaries. The high-temperature compressive deformation test results showed that dynamic recrystallization behavior was suppressed in the specimens containing Nb as the strain rate increased and deformation temperature decreased because of pinning effect by precipitates, grain boundary dragging effects by solute atoms, although the compressive stress increased with increasing strain rate and decreasing deformation temperature.

• 한국농림기상학회지
• /
• 제19권4호
• /
• pp.252-269
• /
• 2017

본 시험은 품종별 개화가 가능한 기준온도와 저온($5.0^{\circ}C$) 누적시간 및 발아 후 변온에 따른 평균 개화소요일수를 구명하여 국내 주요 사과품종('후지', '쓰가루')들과 국내에서 육성한 품종('추광', '감홍', '홍안', '홍금', '홍로', '홍소', '화홍', '섬머드림', '선홍')들의 개화기를 예측하고자 군위지역에서 4년(2009-2012년)동안 조사하였다. 또한, 이들 자료를 이용하여 군위 지역 기온이 현재보다 $5.0^{\circ}C$ 상승되었을 때의 개화시기를 추정하였다. 저온($5.0^{\circ}C$) 누적시간(저온요구도)의 처리 범위는 0~1,671hr 정도였고, 저온 처리 후 개화를 위한 고온(고온요구도) 처리 범위는 $5.0{\sim}29.0^{\circ}C$ 정도였다. 발아 후 변온 처리구들은 항온구(대조구), $5.0{\sim}10.0^{\circ}C$ 상승구 및 하강구로 분류하였다. 결과를 살펴보면, 저온에서의 누적시간이 짧을수록 개화소요일수가 길어지는 경향이 있었으며, 0hr 처리구의 발아 후 개화까지의 소요된 일수는 1,335~1,503hr 처리구보다 2~4주 정도 길었다. 품종 별로는 모든 품종이 발아 후 기온이 $10.0^{\circ}C$ 미만일 때 개화를 하지 못하였고, 저온요구도가 낮은 품종일수록 개화에 필요한 고온요구도가 낮았다. 발아 후 기온을 $15.0^{\circ}C$로 조절된 처리구들의 개화소요일수는 $10.0^{\circ}C$ 처리구들보다 1~3주 정도 빨랐다. 발아 후 변온 처리에서는 발아 후 기온 상승 처리구들의 발아 후 개화까지 소요된 일수가 항온 처리구보다 짧았다. 이상의 결과를 종합해보면, 국내 주요 사과품종들의 개화 기준온도는 $10.0^{\circ}C$로 생각되었으며, 군위지역의 기온이 지금보다 $5.0^{\circ}C$ 정도 상승된다고 가정하면, 개화기는 1주 정도 지연될 것으로 예측되었다.

• 한국자원식물학회지
• /
• 제36권6호
• /
• pp.580-587
• /
• 2023

Androsace septentrionalis is a grass species restricted to North Korea; however, it is at the brink of extinction due to habitat loss and environmental changes caused by natural disasters and anthropogenic activities. This study was conducted to characterize the dormancy conditions of A. septentrionalis in an effort to conserve this North Korean plant resource. For this purpose, the morphological characteristics and vigor of A. septentrionalis seeds were examined, and its germination characteristics under different temperature conditions (15/6℃ and 25/15℃ ), low-temperature stratification, and gibberellin (GA₃) treatment were determined. The results revealed that A. septentrionalis exhibits non-deep type morpho-physiological dormancy, and low-temperature stratification treatment was not effective in breaking the dormancy of A. septentrionalis seeds. Meanwhile, GA₃ treatment significantly increased the mean germination time, rate, and speed of the seeds. The optimal conditions for the germination of A. septentrionalis seeds were 25/15℃ fluctuating temperature and 500 mg·L¹ GA₃ treatment. The results of this study are useful for the mass propagation of A. septentrionalis.

• 한국해양공학회지
• /
• 제25권1호
• /
• pp.56-60
• /
• 2011

A low temperature plasma carburizing process was performed to AISI 304L austenitic stainless steel to achieve the enhancement of surface hardness without a compromise in their corrosion resistance. Attempts were made to investigate the influence of the processing temperatures on the surface-hardened layer during low temperature plasma carburizng in order to obtain the optimum processing conditions. The expanded austenite (${\gamma}C$) was formed on all the treated surfaces. Precipitates of chromium carbides were detected in the hardened layer (C-enriched layer) only for the specimen treated at $500^{\circ}C$. The hardened layer thickness of ${\gamma}C$ increased up to about $35\;{\mu}m$, with increasing treatment temperature. The surface hardness reached about 1000 $HK_{0.05}$, which is about 4 times higher than that of the untreated sample (250 $HK_{0.05}$). Minor loss in corrosion resistance was observed for the specimens treated at temperatures of $310^{\circ}C-450^{\circ}C$ compared with untreated austenitic stainless steel. Particularly, the precipitation of chromium carbides at $500^{\circ}C$ led to a significant decrease in the corrosion resistance.

• 열처리공학회지
• /
• 제16권5호
• /
• pp.281-284
• /
• 2003

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.434-435
• /
• 2003

Physicochemical properties of a polymer surface significantly affect adhesion, wetting, and dyeing properties. In recent years, low temperature plasma technology has been widely used for surface modification of polymers. Surface fluorination by low temperature plasma treatment has been employed to improve the water and oily repellency of textile fabrics. However, very few results have been reported on soil release properties of the oxygen plasma treated textile fabrics. (omitted)