• International Journal of Industrial Entomology and Biomaterials
• /
• 제11권2호
• /
• pp.129-133
• /
• 2005

The seasonal occurrence and influence of abiotic factors viz., maximum and minimum temperature, maximum and minimum humidity and rainfall on population fluctuation of aleyrodid, Dialeuropora decempuncta on a evolved mulberry (Morus alba L.) variety known to be susceptible to aleyrodid infestation was assessed during the period from 1999 - 2001 in twenty-five villages under nine blocks of Malda district of West Bengal. The results indicate that the aleyrodid population is practically very low or absent during January to June and thereafter increases gradually. The increase in population of various stages of aleyrodid is significantly correlated with increase in previous 7 days of average maximum relative humidity.

• 한국안전학회지
• /
• 제17권3호
• /
• pp.1-6
• /
• 2002

A dynamic characteristics of shock absorber in the various excitation is investigated experimentally. Work diagrams and characteristic curves are used as a experimental standard. The various excitation conditions temperature and noise are very important factors in associated with the reduction of damping force. It is found that the heat occurrence from shock absorber, the gas shock absorber is much higher than oil shock absorber and increased in high speed. As to the variation of damping force, there are no change when the speed is low but we fixed amount of variation by increasing speed and change of new and old decrease. The sound pressure of the swash noise from cycle of shock absorber, we compared with theory sound pressure by experiment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.187-192
• /
• 1998

Recent construction method in mass concrete structures would depend on the control of hydration heats and thermal stresses by using the low heat cement, optimized block size and a lift height, or both. This experimental study aims at the possibility of thermal cracks according to the different types of cementations material and at the investigation of these effects. Four different types of cements are applied to the mock-up test and are evaluated in terms of temperature rises and thermal stresses with the use of thermocouples, strain gauges and effective stress gauges. As a result of this study, it was found that stresses measured from effective stress gauges agree well with ones form strain gauges, and the trend of stress occurrence can be well evaluated from theoretical analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.879-885
• /
• 2000

This study is carried out to make clear the reason of occurrence of sudden acceleration incident of AT vehicle. The stepping motor is used to control the engine speed at idle by compensating the volume of air. By the way it's valve is contaminated by blow-by gas, deposit and back fire etc. This contamination could occur the load of motor at low temperature. This plays an important role in damaging the motor's coil with the motor's performance interfered. If it's coil is damaged the ISC could malfunction. If these phenomena occur, the speed of engine may increase or the engine may stall with hunting.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.102-109
• /
• 2005

An attachment part of the construction equipment frequently claimed from the crack occurrence that takes especially at the bucket. therefore we execute the fatigue examination and changes the welding method at the same materials. we executed a fatigue crack propagation experiment and got the conclusions at the normal temperature and Frequency 10Hz. We carried out butt welding for structure steel of SM490A and make three kinds of specimen of different weld method each. The fatigue limit of CASE 1 was determined to the low than CASE 2, CASE 3. the CASE 2 putting the interval of the 2mm creates back plate and make fatigue limit to high. Bead shapes and weld surfaces shape influence on fatigue life of materials. Specially, the crack growth becomes starting point that gap of back-plate and boundary surface of bead. It is confirmed by fracture showing on this study.

• The Plant Pathology Journal
• /
• 제19권1호
• /
• pp.43-45
• /
• 2003

Soft rot symptom was observed on lily bulb in the fields and at a low temperature storage house from 1999 to 2000 in Korea. The small dark-brown lesion appeared on the bulb, and enlarged and developed into the inner scales of the bulb. The bulb became water soaked and gave out unpleasant odor. Two different pathogenic bacteria were isolated from infected tissues. The causal bacteria were identified as Pectobacterium carotovorum subsp. carotovorum (Erwinia carotovora subsp. carotovora) and Pseudomonas marginalis based on bacteriological characteristics. Pathogenicity of the bacteria was proven by Koch's postulations. This is the first report of bacterial soft rot of lily bulb in Korea caused by the two bacteria.

• 미생물학회지
• /
• 제25권3호
• /
• pp.249-253
• /
• 1987

Effects of Ac pulse at low voltage on Saccharomyces cerevisiae were studied. The treatment of yeast suspensions contained 0.2m NaCl with 500mA for 350 sec at $40^{\circ}C$ was shown about 50% of lethality, whereas in the treatment of the same suspensions with 250mA for 250 sec at the temperature ($10^{\circ}C$) corresponding to about 10% of lethality, growth was completely inhibited instead of lethality. The effect of growth inhibition was due to occurrence of auxotrophic strains under experimental conditions. Detection of auxotrophic yeasts was done tentatively with the difference of the number of viable yeast cells between direct counting by methylene blue staining and plate-count on yeast morphology agar.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.161-162
• /
• 2020

In this study, as part of securing related data, water droplets were dropped on the upper part of the wooden board for flooring in an environment such as floor heating, and the degree of absorption according to the surface temperature change was tested. The test results showed that the contact angle of the surface was low (25℃→40℃) or the droplet was absorbed into the small plate and disappeared. The contact angle of the OSB and MDF was decreased within 30 minutes, but the surface water droplet was maintained longer than the plywood. This is because the surface is coated with hydrophobicity unlike the plywood, but moisture absorption in the cross section after the second processing will not be prevented and it will lead to defect occurrence problem.

• 한국기계가공학회지
• /
• 제19권8호
• /
• pp.50-55
• /
• 2020

This study investigates the injection molding of a plastic rack gear and focuses on deflections in the part. The causes of deflections were found and resolved through a trade-off study by injection molding analysis. Based on a warpage analysis, the fiber orientation was found to be a dominant factor in the occurrence of deflections. Changes in the part design and various injection conditions were analyzed for their effects in reducing deflections. Based on the trade-off study, a new part bottom design, injection time, and melt temperature were recommended. A trial injection was done for the new plastic rack gear, and measurements showed that its flatness surpassed that of the original part and met the specified requirement. The short injection time, low melt temperature, and symmetric similar configuration of the part contributed to the reduction in deflections. Therefore, optimized gate design and injection conditions as well as a new part design were validated through injection molding analysis in this study.

• 한국지구과학회지
• /
• 제32권5호
• /
• pp.461-473
• /
• 2011

In this paper, trends of the widely used stability indices (SIs) and environmental parameters (EPs) were examined by using the 30-year routine rawinsonde data observed in three upper air observatories (Osan, Gwangju and Pohang) over South Korea. To take into account of the contribution of water vapor to a parcel density, we applied the virtual temperature correction in calculating the SIs and EPs. The trends of SIs and EPs indicated significant increases of temperature and moisture contents, especially at the low-to-mid troposphere during the last 10 years. The warming trend in the lower troposphere shows about 3 times greater than that of the global average (+0.10- $+0.20^{\circ}C$/10 years), whereas the cooling trend of lower stratosphere demonstrates a similar trend with the global average (-0.33- $-0.60^{\circ}C$/10 years). The vertical stability is clearly reduced due to the unsymmetrical change of atmospheric elements. The unstabilizing trend with the increased moisture contents gradually changed the atmospheric environment in South Korea into the conditions favorable for the occurrence of severe weather or intensifications of such events. These trends are consistent with the recent observations, which showed clear increase in the intensity and frequency of heavy rainfalls.