• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.178-179
• /
• 2021

Comparing the absorption volume of test pieces immersed over time in room temperature moisture with weight, WF absorbed about 40% more than PLAIN, and PLAIN stopped absorbing after 10 minutes, but WF continued to absorb. It is thought that the woven fabric layer of the core material continued to absorb moisture. In the heat transfer test, the test piece to which only WF was applied had a temperature difference of about 2℃ compared to PLAIN, and when the insulating liquid was sprayed, there was a difference in heat transfer properties of up to 5℃. This is judged to have low heat transfer properties of the basic woven fabric, but the heat insulating liquid also further reduces heat transfer properties.

• Korean Journal of Metals and Materials
• /
• v.50 no.10
• /
• pp.729-734
• /
• 2012

This study investigated the effect of water absorption on the tensile properties of carbon-glass/epoxy hybrid composites at room temperature and $-30^{\circ}C$. To investigate the effect of the position of glass fabric in the hybrid composite on the tensile properties, the stacking pattern of the fiber fabrics for reinforcing was created in three different ways: (a) glass fabrics sandwiched between carbon fabrics, (b) carbon fabrics sandwiched between glass fabrics and (c) alternative layers of carbon and glass fabrics. They were manufactured by a vacuum-assisted resin transfer molding (VARTM) process. The results showed that there was surprisingly little difference in tensile strength at the two different temperatures with dry and wet conditions. However, the water absorption into the hybrid system affected the tensile properties of the hybrid composites at RT and $-30^{\circ}C$. When the glass fabrics were at the outermost layers, the hybrid composite had the lowest tensile properties. This is attributed to the fact that the composite had a relatively high water absorption rate.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.19 no.1
• /
• pp.27-35
• /
• 1990

• Journal of Korea Foundry Society
• /
• v.15 no.2
• /
• pp.146-155
• /
• 1995

This study was performed to investigate the effect of austempering temperature on the mechanical properties and fracture characteristics of the ductile cast iron with Cu, Mo and Cu, Mo, Ni. The results obtained from this study are summarized as follows; Microstructures of Cu-Mo and Cu-Mo-Ni ductile cast iron by austempering were obtained low bainite with some martensite at $250^{\circ}C$, mixture structure of upper and low bainite obtained at $300^{\circ}C$ and upper bainite obtained at $350^{\circ}C$. Tensile, impact and fracture toughness properties were remarkably controlled by retained austenite. With increasing austempering temperature, tensile and yield strength, hardness decreased, while the elongation and impact absorption energy, fracture toughness increased. With adding Ni, tensile and yield strength increased and elongation, facture toughness and impact absorption energy decreased. Retained austenite increased with increasing austempering temperature and the fracture surface were shown mixture structure of fibrous and dimple.

• Textile Coloration and Finishing
• /
• v.19 no.6
• /
• pp.21-27
• /
• 2007

The factors which affect the absorption and diffusion of disperse dye in print paste for polyester film were investigated using film roll method. When Emvatex print paste of different disperse dye concentrations were fixed by high temperature steaming(HTS) for 2 hr at $190^{\circ}C$, the dye uptake and diffusion distance of 50g/kg dye concentration for PET film were very low, but those of 100$\sim$300g/kg were increased with increasing dye concentration. It was found that sodium alginate(5%) was more effective for the absorption and diffusion of disperse dye to PET film than CMC(3%) and Emvatex(18%), and Emvatex showed comparatively low absorption in three thickeners used. The dye uptake and diffusion distance of disperse dye in sodium alginate paste for PET film were increased with increasing paste thickness to $160\sim180{\mu}m$, but were decreased at $200\sim220{\mu}m$ in both fixations of baking and HTS for 2 hr at $190^{\circ}C$, and were far more largely increased by fixation of HTS than baking because steam was very important for fixation. Also it was confirmed that dye uptake was slightly increased as steam supply pressure was raised from 1 $kg/cm^2$ to 2 $kg/cm^2$, andthe dye uptake and diffusion distance of disperse dye were outstandingly increased with raising fixing temperature from $170^{\circ}C$ to $190^{\circ}C$ and fixing time from 0.5 hr to 3 hr in the fixation of HTS.

• Macromolecular Research
• /
• v.9 no.6
• /
• pp.297-302
• /
• 2001

Rice starch was incorporated into linear low density polyethylene (LLDPE) using a Brabender Plastic-Corder internal mixer at a temperature of 140$\^{C}$ and 40 rpm. The starch loading was varied from 0 to 30% with 5 intervals. Studies on brabender torque development, mechanical properties and water absorption were investigated. The starch loading did not influence the brabender torque significantly. With respect to mechanical properties; the tensile strength and elongation at break decrease with increasing starch loading. The Young's modulus also increases with the starch filling. Mechanical properties were deteriorated as the starch absorbed moisture. The rate of water absorption was dependent on the starch filling in the composites. The scanning electron microscope (SEM) analysis was performed for the tensile fracture surfaces and it revealed the starch agglomeration and a poor dispersion of starch in the LLDPE matrix.

• Journal of the Korean Vacuum Society
• /
• v.8 no.2
• /
• pp.153-157
• /
• 1999

The dependence of the absorption edge of wurtzite $Al_xGa_{1-x}N$ on alN mole fraction has been studied. The AlN mole fraction was varied from 0 to 1. The absorption coefficients at room temperature were determined by transmission and photothermal deflection spectroscopy. Photothermal deflection spectroscopy can be applied to determine the low absorbance values. From the results, the effective bandgaps of $Al_xGa_{1-x}N$ alloys were determined by choosing corresponding photon energies of the positions of the absorption coefficient of $6.3\times10^4\textrm{cm}^{-1}$ at the absorption curves of the $Al_xGa_{1-x}N$ alloys. From the energy position of the absorption coefficient versus AlN mole fraction, a bowing parameter of 1.3eV was determined. The bowing parameter agreed quite well with the measured effective bandgaps of AlGaN alloys.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.28-36
• /
• 1992

Fifty rice varieties were tested for alkali digestibility of milled rice grain at four different KOH levels, and twenty-four varieties selected were tested again for alkali digestibility at different degrading times and KOH levels. Gelatinization rate at several heating times and heating temperatures, and water absorption rate at 21$^{\circ}C$ and 77$^{\circ}C$ water temperatures were observed using rice samples of twenty-four varieties to clarify the relationship between alkali digestibility response, gelatinization rate and water absorption rate. Varietal difference of ADV in Japonica and Tongil tye rices was biggest at KOH 1.2%, but it was better to test at KOH 1.2% and 1.4% levels to know the exact alkali digestibility response of rice varieties. Rice varieties tested could be classified into three groups, low, intermediate and high, based on their alkali digestibility response at four KOH levels, and most of Korean cultivated rice varieties were belonged to intermediate or high ADV group. Varietal variation was also found in alkali degrading response at different soaking times in alkali solution. Low ADV varietal group showed higher gelatinization temperature and needed longer heating time for complete gelatinization compared with intermediate or high ADV group. Same trends was found between intermediate and high ADV groups, but varietal variation in the same ADV group was also found in gelatinization temperature and heating time needed for complete gelatinization of rice grain. Water absorption rate of low ADV group was lower than intermediate or high ADV group both at 21$^{\circ}C$ and 77$^{\circ}C$ water temperatures, and intermediate ADV group showed lower absorption rate than high ADV group only in initial water absorption stage at 21$^{\circ}C$.

• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.48-55
• /
• 1994

In this paper, It is studied that the variation of the dielectric absorption of the specimen according to the change with $^{60}$ Co-${\gamma}$ ray irradiation dose of the influence of temperature and applied voltage. In order to investigate the effect of irradiated oriented polypropylene film, we have observed dielectric properties within the temporature range of 30~130 ($^{\circ}C$) and voltage range of 100~250 (V). As for the dependency of temperature by tan $\delta$, the $\alpha$ peak which appears at high temperature increases accordingly to the increment of irradiation dose which is contributed by the crystal region and moves towards the high temperature. The $\beta$ peak which appears the orientation by dipoles and molecular motions in the amorphous region at low temperature. For the dependency of voltage by tan $\delta$ at low temperature, the peak of the tan $\delta$ shifts accordingly to the increment of irradiation dose towards the high temperature region.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.165-170
• /
• 2012

This study aims to analyze the characteristics of temperature variation of Spandrels. According to the change of SHGC of Window system, air space, insulation performance and absorption factor of inner surface at the Spandrels, It was firstly estimated by using simulation. Secondly, measured to minimize the temperature-rise of inner surface temperature and the intermediate air temperature by using Full-scale Mock-up based on the result of simulation analysis. As a result, it turns out that low SHGC window system such as BIPV system had an advantage of reducing the window surface temperature, and the surface temperature of clear window system was all higher than BIPV system on simulation results. In the experiment results, it had some advantages of increasing the Spandrels volume, decreasing insulation performance and lower absorption factor.