• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.297-302
• /
• 2004

This paper presents the low cycle thermal fatigue of the engine exhaust manifold subject to thermo-mechanical cyclic loading. As a failure of the exhaust manifold is mainly caused by geometric constraints of the less expanded inlet flange and cylinder head, the analysis is based on the exhaust system model with three-dimensional temperature distribution and temperature dependent material properties. The result show that large compressive plastic deformations are generated at an elevated temperature of the exhaust manifold and tensile stresses are remained in several critical zones at a cold condition. From the repetition of these thermal shock cycles, maximum plastic strain range (0.454%) could be estimated by the stabilized stress-strain hysteresis loops. It is used to predict the low cycle thermal fatigue life of the exhaust manifold for the thermal shock test.

• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1897-1904
• /
• 2002

Monotonic torsional and pure torsional low cycle fatigue(LCF) test with artificial degradation were performed on duplex stainless steel(CF8M). CF8M is used in pipes and valves in nuclear reactor coolant system. It was aged at 430$^{\circ}C$ for 3600hrs. Through the monotonic and LCF test, it is found that mechanical properties(i.e., yield strength, strain hardening exponent, strength coefficient etc.) increase and fatigue life(N$\sub$f/) decreases with degradation of material. The relationship between shear strain amplitude(${\gamma}$$\sub$a/)and N$\sub$f/ was proposed.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.935-943
• /
• 1988

본 연구에서는 유압벌지시험기를 이용한 저속 벌지시험과 낙하해머(drop hammer)를 응용한 충격벌지시험기를 제작, 사용하여 충격벌지시험을 하여 저속변형과 충격변형에서 판재금속의 성형한계선도를 구하고 변형율속도가 판재의 불안정 및 성형 성에 미치는 영향을 조사하고 다이의 형상비(단축/장축)를 0.5, 0.75, 1.0 등으로 달 리하여 실험하므로써 변형경로에 따른 한계변형율의 변화를 관찰하고 아울러 기존의 성형한계이론과 비교, 검토하였다.

• Steel and Composite Structures
• /
• 제47권3호
• /
• pp.383-393
• /
• 2023

Conventional reinforced concrete design codes assume ideal strain evolution in semi-deep beams with externally bonded fiber-reinforced polymer (EB-FRP) web strips. However, there is a strain interaction between internal stirrups and web strips, leading to a notable difference between code-based and experimental shear strengths. Current study provides an experiment-verified detailed numerical framework to assess the potential strain interaction under quasi-static monotonic load. Based on the observations, steel stirrups are effective only for low EB-FRP amounts and the over-strengthening of semi-deep beams prevents the stirrups from yielding, reducing its shear strength contribution. A notable difference is detected between the code-based and the study-based EB-FRP strain values, which is a function of the normalized FRP stress parameter. Semi-analytical relations are proposed to estimate the effective strain and stress of the components considering the potential strain interaction. For the sake of simplification, a linearized correction factor is proposed for the EB-FRP web strip strain, assuming its restraining effect as constant for all steel stirrup amounts.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.131-139
• /
• 1999

A Numerical Analysis of NOx production in Hydrogen-Air flame is performed using the quasi-laminar reaction modelling. As results, in low global strain rate region, $U_F/D_F\;{\leq}\;50,000$, the quasi-laminar reaction modelling reproduces the experimentally observed EINOx half power scaling that the ratio of EINOx and flame residence time, $L_f^3(D_F^2U_F)$, is proportional to the square root of global strain rate. Thus, it suggests that turbulence-chemistry interaction has a minor impact on the trend of NOx production in low global strain rate region. However, the quasi-laminar reaction modelling predicts the higher temperature and NOx than experimentally observed. This overprediction may be due to the lack of radiation and quasi-laminar reaction modelling.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.23-26
• /
• 2012

Experimental study was conducted to elucidate flame extinction phenomena in counterflow flame. Using a curtain helium flow significantly reduced buoyancy such that the flame can be positioned at the center between the upper and lower nozzles even at the velocity ratio of 1.0. The curves of critical diluent mole fraction versus global strain rate have C-shapes. The flame oscillation was observed prior to low strain rate flame extinction at both flame conditions with and without minimizing buoyancy force. The results show that, at low strain rate flame, the self-excitation frequency with the order of 1.0 Hz in the case of utilizing pure helium gradually decreases in increase of $N_2$ mole fraction in the curtain flow, meaning that buoyancy suppresses the self-excitation of the outer edge flame.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2000년도 춘계학술대회 발표논문집
• /
• pp.213-222
• /
• 2000

In present study, a stochastic model is developed for the low cycle fatigue life prediction and reliability assessment of 316L stainless steel under variable multiaxial loading. In the proposed model, fatigue phenomenon is considered as a Markov process, and damage vector and reliability are defined on every plane. Any low cycle fatigue damage evaluating method can be included in the proposed model. The model enables calculation of statistical reliability and crack initiation direction under variable multiaxial loading, which are generally not available. In present study, a critical plane method proposed by Kandil et al., maximum tensile strain range, and von Mises equivalent strain range are used to calculate fatigue damage. When the critical plane method is chosen, the effect of multiple critical planes is also included in the proposed model. Maximum tensile strain and von Mises strain methods are used for the demonstration of the generality of the proposed model. The material properties and the stochastic model parameters are obtained from uniaxial tests only. The stochastic model made of the parameters obtained from the uniaxial tests is applied to the life prediction and reliability assessment of 316L stainless steel under variable multiaxial loading. The predicted results show good accordance with experimental results.

• 한국미생물·생명공학회지
• /
• 제29권4호
• /
• pp.212-220
• /
• 2001

S. cerevisiae HBC52와 S, diataticus K114 의 rare mating 에 의해 개발된 HCS 균주들은 크기가 약 $13\mu\textrm{m}$ karyotype 분석결과 K114 균주에만 있는 약 1150kb 분자량을 가지는 염색체 band를 유지하였으며 전분을 분해하여 halo 를 형성하였다. Glucoamylase 활성은 약 2.7~3.4 unti/ml 를 가진 균주임이 밝혀졌으며 당 발효실험과 응집성 실험을 수행한 결과 HBC52 균주와 유사한 당 발효특성을 보이고 응집성 특성도 약응집성의 floculation type으로 비슷하였다. 그리고 HCS 균주의 포자형성과 피막형성 유무 실험에서는 양조효모인 HBC52 균주와 같이 포자가 형성되지 않았으며, 피막도 형성되지않았다. 균주들의 최종당도 실험은 HBC52균주가 약 68%의 발효수준을 나타냈고, HCS 균주들은 이 보다 높은 76~78%의 수준을 보였따. 즉 HBC52 균주가 최종당도($ 2.00^{\circ}$P)를 보인 반면 HCS 균주들은 ($0.7~0.93^{\circ}$P)를 보이는 결괄르 나타내어 맥주양조에서 low carbohydrate beer를 생산할 수있음이 확인되었다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제9권1호
• /
• pp.73-78
• /
• 2004

The impact of low concentration fluoride on toxification was studied by treating $3^rd$ instar silkworm larvae of Qiufeng${\times}$Baiyu (Fluoride resistant strain) and Jinshong${\times}$Haoyue (Fluoride sensitive strain). The $5^th$ instar silkworm larvae of Zhenong-l, Shu-12, Qiufeng ${\times}$ Baiyu, Chunhua ${\times}$ Qhiushi, Jinshong and Haoyue were fed mulberry leaves treated with sodium fluoride at different concentrations to determine its effect on fecundity. Harmful effects of low concentration fluoride at early instars on growth, development and economic characters of Bombyx mori are related to its resistance. Harmful effect on resistant strain Qiufeng${\times}$Baiyu manifested on prolongation of instar duration of 15 and 6% in 70 ppm, where as the sensitive breed Jinshong${\times}$Haoyue manifested with 100% mortality in 50 ppm. The impact of low concentration fluoride on fecundity resulted in considerable increase in formed eggs (9%) and laid eggs (9%) in Zhenong-l and Shu-12 among treated population over control. The present observations emphasis that fluoride apart from exhibiting harmful effects on silkworm growth and development, however, its low concentration do playa vital role in inducing some positive effect on fecundity and cocoon traits.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.38-44
• /
• 2007

The hygroscopic property of paper is important for convertability and end use performance. When the board and corrugated fiberboard are exposed to low relative humidity, a trouble of score (or crease) cracking could occur. In this study, we evaluated the moisture content and mechanical properties of linerboard and corrugated board at the cyclic condition of low humidity to prevent a score crack trouble. As the relative humidity decreased from 50% to 38% and 25%, the moisture content of linerboard decreased about 7% to 6% and 4%. At low humidity, most of mechanical properties were improved except for strain. The linerboard exposed at 25% RH showed a remarkable reduction of strain by 11%. At the same relative humidity, linerboard and corrugated fiberboard showed the different property values depending on moisture hysteresis.