• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.111-114
• /
• 2012

The ignition behavior of single coal particles of five kindes of coal with different ranks (low volatile bituminous, low volatile sub-bituminous, high volatile bituminous, lignite) with particle size of $150-200{\mu}m$ was investigated at high heating rate condition. Particles were injected into a laminar flow reactor and the ignition behavior was observed with high speed cinematography. Sub-bituminous were observed to ignite homogeneously; however, low volatile bituminous coal and lignite undergo fragmentation prior to igntion. The observation was analyzed with previous work.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.639-643
• /
• 2011

저등급석탄의 고품위화 기술 중 하나인 유중 슬러리 건조 공정은 슬러리 혼합, 슬러리 탈수, 유분 회수, 건조, 성형공정으로 구성된 건조 및 안정화 공정이다. 연간 백만 톤 규모의 저등급석탄 고품위화 공정에 대한 경제성을 분석하기 위하여 재료비, 노무비, 경비, 판매관리비를 산정하고 이에 따른 현금흐름을 계산하였다. 투자비 $1억, 할인율 12%, 내용 연수 20년에 대한 IRR, B/C ratio, NPV, 할인투자회수기간을 통해 사업의 경제성을 분석한 결과 모든 투자 기준을 만족하는 것으로 나타났다. 민감도 분석을 통해 투자가치가 원료탄과 제품 가격에 매우 민감한 것을 확인하였으며, 석탄가격이 급등하는 현 추세에서는 예상 투자가치가 증가할 것으로 판단되었다.

• 청정기술
• /
• 제20권3호
• /
• pp.321-329
• /
• 2014

본 연구에서는 고수분 저등급 석탄을 저수분 석탄으로 만들기 위하여 실험실 규모의 회분식 스팀 유동층 건조기를 사용하여 수분이 약 26%함유된 인도네시아산 저등급 석탄을 5% 이하로 건조하였다. 일반적으로 이산화탄소 포집 및 저장기술(carbon capture and storage, CCS)은 $CO_2$를 재생하는 공정에서 $100{\sim}150^{\circ}C$의 스팀과 $CO_2$혼합가스를 배출한다. 이때 배출되는 가스의 열을 사용하여 저등급 석탄을 건조하는 것이 본 연구의 최종 목적이다. 이를 위하여 본 연구에서는 건조의 열원으로 스팀을 사용하고, 유동화 가스는 $CO_2$를 사용하여 저등급 석탄을 건조하였다. 연구에 사용한 스팀의 유량은 0.3~1.1 kg/hr, 온도는 $100~130^{\circ}C$, 석탄의 층높이는 9~25 cm로 변화시켰다. 건조 후 석탄의 특성 변화는 공업분석, 발열량분석 그리고 입자크기 분석을 통하여 확인하였다. 변수 실험을 수행한 결과 원탄의 건조속도는 스팀의 유량과 온도가 증가함에 따라 증가하였고, 층높이가 감소할수록 건조속도가 증가하였다.

• 한국수소및신에너지학회논문집
• /
• 제27권6호
• /
• pp.693-701
• /
• 2016

Steam gasification of low rank coals is possible at relatively low temperature and low pressure, and thus shows higher efficiency compared to high rank coals. In this study, the gasification reactivity of four different Indonesian low rank coals (Samhwa, Eco, Roto, Kideco-L) was evaluated in $T=700-800^{\circ}C$. The low rank coals containing $53.8{\pm}3.4$ wt% volatile matter in proximate analysis and $71.6{\pm}1.2$ wt% carbon in ultimate analysis showed comparable gasification reactivity. In addition, $K_2CO_3$ catalyst rapidly accelerated the reaction rate at $700^{\circ}C$, and all of the coals were converted over 90% within 1 hour. The XRD analysis showed no significant difference in carbonization between the coals, and the FT-IR spectrum showed similar functional groups except for differences due to moisture and minerals. TGA results in pyrolysis ($N_2$) and $CO_2$ gasification atmosphere showed very similar behavior up to $800^{\circ}C$ regardless of the coal species, which is consistent with the steam gasification results. This confirms that the indirect evaluation of the reactivity can be made by the above instrumental analyses.

• 자원환경지질
• /
• 제32권1호
• /
• pp.83-91
• /
• 1999

Coal properties are controlled by the following two factors : One is the maceral components and the other is the degree of coalification. In other words, even if coals in question indicate the same degree of coalification, their chemical and physical properties considerably vary one another when their maceral components are different. It is well known that virtrinite reflectance is the best single criterion for the degree of coalification covering the whole range of coal rank. Some authors have recently insisted that sporinite fluorescence is more leliable coal rank parameter than vitrinite reflectance in case of low rank coals. In this paper, to examine the relince of sporinite fluorescence as coal rank parameter, fluidity analysis of coals is newly performed and the data are analyzed in comparision with those of virinite reflectance, sporinite fluorescence and maceral components. The results of this study are as follows; 1) Vitrinite reflectance becomes low when degradinite content is high within one columnar samples, and vice versa. 2) variation of vitrinite reflectance depend on degradinite content and on difference of roiginal plant. 3) In dealing with the Japanese paleogene coals, sporinite fluorescence is more reliable parameter indicating the degree of coalification than vitrinite reflectance. 4) Maximum fluidity increases exponetially in proportion to the increases of degradinite content.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.205-208
• /
• 2012

In this study, the thermal behavior and combustion characteristics of different ranks of coals and their blends were investigated to obtain information necessary for the evaluation of the co-processing of blends with low-rank coals. Thermogravimetric analysis(TGA) and differential thermal analysis(DTA) were carried out at different temperature from ambient temperature to $800^{\circ}C$, and a laboratory-scale pulverized coal combustion burner was used with coal feeing rate of $1.04{\times}10^{-4}kg/s$.

• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.340-346
• /
• 2013

Study on clean and efficient utilization technology for low rank coal with high moisture content is actively ongoing due to limited reserves of petroleum and of high grade coal and serious climate change caused by fossil fuel usage. In the present study, supercritical water gasification of low rank coal was performed. With increasing reaction temperature, content of combustible gases such as $H_2$ and $CH_4$ in the syngas increased while the $CO_2$ content decreased. As the reaction pressure increased from 210 to 300 bar, the $CO_2$ content in the syngas increased while the hydrocarbon gas content decreased. The $H_2$ and $CH_4$ content in the syngas increased slightly with pressure. With the addition of Pd, Pt, and Ru catalysts, it was possible to improve the production of $H_2$. Moreover, the increase of active metal content in the catalyst increased the $H_2$ productivity. The Ru catalyst shows the best performance for increasing the $H_2$ content in the syngas, while decreasing the $CO_2$ content.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.555-560
• /
• 2008

저등급 석탄으로부터 무회분 초청정 석탄 제조를 위하여 온도 $200-430^{\circ}C$, 0.1MPa에서 추출실험을 수행하였다. 세 가지의 서로 다른 등급의 석탄시료를 사용하였으며 추출용매는 극성용매 N-methyl-2-pyrrolidinone(NMP)와 비극성 용매 1-methyl naphthalene(1-MN), Light Cycle Oil(LCO)를 사용하였다. 실험결과 NMP에 의한 추출율이 1-MN이나 LCO에 의한 추출율 보다 높게 나타났다. 그러나 회분농도는 1-MN에 의한 추출탄이 가장 낮았다. 세가지 추출 운전모드, 즉 무교반운전모드, 교반운전모드, 그리고 초음파를 이용한 운전모드를 각각 수행하였다. 추출온도 $350^{\circ}C$에서 NMP를 사용한 추출실험에서, 교반운전모드에서의 추출율 및 추출탄의 회분농도는 각각 70.09wt%(daf), 1.03wt%(db) 이었으며, 초음파를 이용한 운전모드에서의 추출율 및 추출탄의 회분농도는 각각 80.70wt%(daf), 0.76wt%(db) 이었다. 1-MN를 사용한 추출에서도 NMP의 경우와 같이 초음파 추출이 가장 우수한 추출특성을 나타냈다. 초음파를 이용한 추출방법은 교반추출과 비교하여 추출율을 15-20%, 회분 저감은 최대 26% 까지 향상시킬 수 있었다.

• 한국연소학회지
• /
• 제14권3호
• /
• pp.16-23
• /
• 2009

It is strongly desired for coal-fired power plants to utilize not only low-rank coals with high moisture contents, but also lowering cost with diversifying fuel sources. In this study, combustion characteristics of low rank coal with high moisture, and standard pulverized coals are experimentally investigated using TGA (Thermogravimetric Analysis) and DTF (drop tube furnace). The coals tested are three kinds of coal with moisture content ranging from 8.32 to 26.82%. The results show that under the air combustion condition, the burn-out time at TGA rises as moisture content increases, and standard pulverized coal with 8.32% moisture content showed the lowest activation energy of 55.73 kJ/mol. In case of the high amount of moisture, the combustion efficiency decreases due to evaporation heat loss, and unburned carbon in ash produced at combustion process in DTF increased. Aslo, initial deformation temperature of slag attached in alumina tube of DTF decreased with lowering the crytallinity of anorthite and augite. To improve the combustion reactivity and efficiency, it is effective to upgrade through drying the high moisture coal to moisture level (less than 10%) of standard pulverized coal.

• 청정기술
• /
• 제24권2호
• /
• pp.119-126
• /
• 2018

This study introduced a treatment process that was developed to treat Indonesian low-rank coal with high-ash content, which has the same characteristics as residual coal from the biosolubilization process. The treatment process includes separation of ash, solid-liquid separation, pelletizing, and drying. To reduce the ash content, flotation was performed using 4-methyl-2-pentanol (MIBC) as frother, and kerosene, waste oil, and cashew nut shell liquid (CNSL) as collectors. The increasing amount of collector had an effect on combustible coal recovery and ash reduction. After flotation, a filter press, extruder, and an oven drier were used to make a dried coal pellet. Then another coal pellet was made using asphalt as a binder. The compressive strength and friability of the coal pellets were tested and compared.